kernel/drivers/net/ethernet/sfc/siena, branch linux-6.18.y

Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-10-06T17:41:03Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that take config space accessor functions. Implement pci_find_capability(), pci_find_ext_capability(), and dwc, dwc endpoint, and cadence capability search interfaces with them (Hans Zhang) - Leave parent unit address 0 in 'interrupt-map' so that when we build devicetree nodes to describe PCI functions that contain multiple peripherals, we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) - Add sysfs 'serial_number' file to expose the Device Serial Number (Matthew Wood) - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das) Resource management: - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Clean up bridge window sizing and assignment (Ilpo Järvinen), including: - Leave non-claimed bridge windows disabled - Enable bridges even if a window wasn't assigned because not all windows are required by downstream devices - Preserve bridge window type when releasing the resource, since the type is needed for reassignment - Consolidate selection of bridge windows into two new interfaces, pbus_select_window() and pbus_select_window_for_type(), so this is done consistently - Compute bridge window start and end earlier to avoid logging stale information MSI: - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) Error handling: - Align AER with EEH by allowing drivers to request a Bus Reset on Non-Fatal Errors (in addition to the reset on Fatal Errors that we already do) (Lukas Wunner) - If error recovery fails, emit FAILED_RECOVERY uevents for the devices, not for the bridge leading to them. This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner) - Align AER with EEH by calling err_handler.error_detected() callbacks to notify drivers if error recovery fails (Lukas Wunner) - Align AER with EEH by restoring device error_state to pci_channel_io_normal before the err_handler.slot_reset() callback. This is earlier than before the err_handler.resume() callback (Lukas Wunner) - Emit a BEGIN_RECOVERY uevent when driver's err_handler.error_detected() requests a reset, as well as when it says recovery is complete or can be done without a reset (Niklas Schnelle) - Align s390 with AER and EEH by emitting uevents during error recovery (Niklas Schnelle) - Align EEH with AER and s390 by emitting BEGIN_RECOVERY, SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the result of err_handler.error_detected() (Niklas Schnelle) - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES error information identifies a device without an AER Capability (Breno Leitao) - Update error decoding and TLP Log printing for new errors in current PCIe base spec (Lukas Wunner) - Update error recovery documentation to match the current code and use consistent nomenclature (Lukas Wunner) ASPM: - Enable all ClockPM and ASPM states for devicetree platforms, since there's typically no firmware that enables ASPM This is a risky change that may uncover hardware or configuration defects at boot-time rather than when users enable ASPM via sysfs later. Booting with "pcie_aspm=off" prevents this enabling (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) Power management: - If a device has already been disconnected, e.g., by a hotplug removal, don't bother trying to resume it to D0 when detaching the driver. This avoids annoying "Unable to change power state from D3cold to D0" messages (Mario Limonciello) - Ensure devices are powered up before config reads for 'max_link_width', 'current_link_speed', 'current_link_width', 'secondary_bus_number', and 'subordinate_bus_number' sysfs files. This prevents using invalid data (~0) in drivers or lspci and, depending on how the PCIe controller reports errors, may avoid error interrupts or crashes (Brian Norris) Virtualization: - Add rescan/remove locking when enabling/disabling SR-IOV, which avoids list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) Peer-to-peer DMA: - Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) Endpoint framework: - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Fix array underflow in endpoint BAR test case (Dan Carpenter) - Skip endpoint IRQ test if the IRQ is out of range to avoid false errors (Christian Bruel) - Fix endpoint test case for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the endpoint doorbell test case can be run more than once (Niklas Cassel) - Avoid a NULL pointer dereference when releasing DMA channels in endpoint DMA test case (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) AMD MDB PCIe controller driver: - Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for PERST# being described in a Root Port stanza, falling back to the host bridge if not found there (Sai Krishna Musham) Freescale i.MX6 PCIe controller driver: - Enable the 3.3V Vaux supply if available so devices can request wakeup with either Beacon or WAKE# (Richard Zhu) MediaTek PCIe Gen3 controller driver: - Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) NVIDIA Tegra PCIe controller driver: - When asserting PERST#, disable the controller instead of mistakenly disabling the PLL twice (Nagarjuna Kristam) - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) Qualcomm PCIe controller driver: - Select PCI Power Control Slot driver so slot voltage rails can be turned on/off if described in Root Port devicetree node (Qiang Yu) - Parse only PCI bridge child nodes in devicetree, skipping unrelated nodes such as OPP (Operating Performance Points), which caused probe failures (Krishna Chaitanya Chundru) - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang) - Consolidate Root Port 'phy' and 'reset' properties in struct qcom_pcie_port, regardless of whether we got them from the Root Port node or the host bridge node (Manivannan Sadhasivam) - Fetch and map the ELBI register space in the DWC core rather than in each driver individually (Krishna Chaitanya Chundru) - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift Feature' and use this in the qcom driver (Krishna Chaitanya Chundru) - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya Chundru) - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm Glymur, which is compatible with X1E80100 but doesn't have the cnoc_sf_axi clock (Qiang Yu) Renesas R-Car PCIe controller driver: - Fix a typo that prevented correct PHY initialization (Marek Vasut) - Add a missing 1ms delay after PWR reset assertion as required by the V4H manual (Marek Vasut) - Assure reset has completed before DBI access to avoid SError (Marek Vasut) - Fix inverted PHY initialization check, which sometimes led to timeouts and failure to start the controller (Marek Vasut) - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a regression when converting to msi_create_parent_irq_domain() (Claudiu Beznea) - Drop the spinlock protecting the PMSR register - it's no longer required since pci_lock already serializes accesses (Marek Vasut) - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) SOPHGO PCIe controller driver: - Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the SOPHGO SG2042 PCIe controller (Chen Wang) STMicroelectronics STM32MP25 PCIe controller driver: - Update pinctrl documentation of initial states and use in runtime suspend/resume (Christian Bruel) - Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs it during resume (Christian Bruel) - Add devicetree bindings and drivers for the STMicroelectronics STM32MP25 in host and endpoint modes (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) - Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) TI J721E PCIe driver: - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth Vadapalli) - Power controller off before configuring the glue layer so the controller latches the correct values on power-on (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits with error (Siddharth Vadapalli) - Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe devices to specific regions of host memory, to the ti,am65 binding (Jan Kiszka) Xilinx NWL PCIe controller driver: - Clear bootloader E_ECAM_CONTROL before merging in the new driver value to avoid writing invalid values (Jani Nurminen)" * tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits) PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings PCI: stm32: Add PCIe host support for STM32MP25 PCI: xilinx-nwl: Fix ECAM programming PCI: j721e: Fix incorrect error message in probe() PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller PCI: dwc: Support 16-lane operation PCI: Add lockdep assertion in pci_stop_and_remove_bus_device() PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0() PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock PCI: rcar-gen4: Fix inverted break condition in PHY initialization PCI: rcar-gen4: Assure reset occurs before DBI access PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion PCI: Set up bridge resources earlier PCI: rcar-host: Drop PMSR spinlock ...

ethtool: add FEC bins histogram report

2025-09-26T23:49:18Z

IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024 clarifies it a bit further. Implement reporting interface through as addition to FEC stats available in ethtool. Drivers can leave bin counter uninitialized if per-lane values are provided. In this case the core will recalculate summ for the bin. Signed-off-by: Vadim Fedorenko Reviewed-by: Aleksandr Loktionov Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski

net: replace use of system_wq with system_percpu_wq

2025-09-23T00:40:30Z

Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. system_unbound_wq should be the default workqueue so as not to enforce locality constraints for random work whenever it's not required. Adding system_dfl_wq to encourage its use when unbound work should be used. The old system_unbound_wq will be kept for a few release cycles. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Link: https://patch.msgid.link/20250918142427.309519-3-marco.crivellari@suse.com Signed-off-by: Jakub Kicinski

sfc: replace min/max nesting with clamp()

2025-08-15T00:48:29Z

The clamp() macro explicitly expresses the intent of constraining a value within bounds.Therefore, replacing min(max(a, b), c) with clamp(val, lo, hi) can improve code readability. Signed-off-by: Xichao Zhao Reviewed-by: Joe Damato Reviewed-by: Edward Cree Link: https://patch.msgid.link/20250812065026.620115-1-zhao.xichao@vivo.com Signed-off-by: Jakub Kicinski

PCI/ERR: Remove remnants of .link_reset() callback

2025-08-13T18:21:02Z

Back in 2017, commit 2fd260f03b6a ("PCI/AER: Remove unused .link_reset() callback") removed .link_reset() from struct pci_error_handlers, but left a few code comments behind which still mention it. Remove them. The code comments in the SolarFlare Ethernet drivers point out that no .mmio_enabled() callback is needed because the driver's .error_detected() callback always returns PCI_ERS_RESULT_NEED_RESET, which causes pcie_do_recovery() to skip .mmio_enabled(). That's not quite correct because efx_io_error_detected() does return PCI_ERS_RESULT_RECOVERED under certain conditions and then .mmio_enabled() would indeed be called if it were implemented. Remove this misleading portion of the code comment as well. Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/1d72a891a7f57115e78a73046e776f7e0c8cd68f.1755008151.git.lukas@wunner.de

net: Fix typos

2025-07-25T17:29:07Z

Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas Reviewed-by: David Arinzon Reviewed-by: Simon Horman Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski

sfc: siena: eliminate xdp_rxq_info_valid using XDP base API

2025-07-02T00:02:12Z

Commit d48523cb88e0 ("sfc: Copy shared files needed for Siena (part 2)") use xdp_rxq_info_valid to track failures of xdp_rxq_info_reg(). However, this driver-maintained state becomes redundant since the XDP framework already provides xdp_rxq_info_is_reg() for checking registration status. Signed-off-by: Fushuai Wang Acked-by: Edward Cree Reviewed-by: Larysa Zaremba Link: https://patch.msgid.link/20250628051033.51133-1-wangfushuai@baidu.com Signed-off-by: Jakub Kicinski

eth: sfc: siena: migrate to new RXFH callbacks

2025-06-21T14:53:39Z

Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). This driver's RXFH config is read only / fixed so the conversion is purely factoring out the handling into a helper. Reviewed-by: Edward Cree Link: https://patch.msgid.link/20250618203823.1336156-3-kuba@kernel.org Signed-off-by: Jakub Kicinski

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37Z

Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12Z

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar