kernel/drivers/net/ethernet/realtek/Makefile, branch linux-6.18.y

realtek: Update the Makefile and Kconfig in the realtek folder

2024-09-06T05:02:39Z

1. Add the RTASE entry in the Kconfig. 2. Add the CONFIG_RTASE entry in the Makefile. Signed-off-by: Justin Lai Link: https://patch.msgid.link/20240904032114.247117-13-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski

r8169: fix building with CONFIG_LEDS_CLASS=m

2024-01-05T00:57:14Z

When r8169 is built-in but LED support is a loadable module, the new code to drive the LED causes a link failure: ld: drivers/net/ethernet/realtek/r8169_leds.o: in function `rtl8168_init_leds': r8169_leds.c:(.text+0x36c): undefined reference to `devm_led_classdev_register_ext' LED support is an optional feature, so fix this issue by adding a Kconfig symbol R8169_LEDS that is guaranteed to be false if r8169 is built-in and LED core support is a module. As a positive side effect of this change r8169_leds.o no longer is built under this configuration. Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312281159.9TPeXbNd-lkp@intel.com/ Suggested-by: Arnd Bergmann Signed-off-by: Heiner Kallweit Reviewed-by: Simon Horman Tested-by: Simon Horman # build-tested Tested-by: Arnd Bergmann Link: https://lore.kernel.org/r/d055aeb5-fe5c-4ccf-987f-5af93a17537b@gmail.com Signed-off-by: Jakub Kicinski

r8169: add support for LED's on RTL8168/RTL8101

2023-12-20T11:47:39Z

This adds support for the LED's on most chip versions. Excluded are the old non-PCIe versions and RTL8125. RTL8125 has a different LED register layout, support for it will follow later. LED's can be controlled from userspace using the netdev LED trigger. Tested on RTL8168h. Note: The driver can't know which LED's are actually physically wired. Therefore not every LED device may represent a physically available LED. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

r8169: factor out PHY configuration to r8169_phy_config.c

2020-01-11T00:41:35Z

Move chip-specific PHY configurations to separate source file r8169_phy_config.c. This improves maintainability of the driver. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

r8169: factor out firmware handling

2019-06-05T18:41:59Z

Let's factor out firmware handling into a separate source code file. This simplifies reading the code and makes clearer what the interface between driver and firmware handling is. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

r8169: rename r8169.c to r8169_main.c

2019-06-05T18:41:59Z

In preparation of factoring out firmware handling rename r8169.c to r8169_main.c. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net/ethernet: sc92031 is not Realtek

2011-11-01T23:30:38Z

While the SC92031 could be found on fake "Realtek" NICs, it has no relationship to Realtek, and is actually from Silan. Create a new subdirectory for silan and move sc92031 there. Signed-off-by: Cesar Eduardo Barros Signed-off-by: David S. Miller

8139*/atp/r8169/sc92031: Move the Realtek drivers

2011-08-11T23:29:42Z

Move the Realtek drivers into drivers/net/ethernet/realtek/ and make the necessary Kconfig and Makefile changes. CC: Realtek linux nic maintainers CC: Francois Romieu CC: Jeff Garzik CC: Donald Becker Signed-off-by: Jeff Kirsher