kernel/drivers/net/ethernet/pensando/ionic/ionic_lif.h, branch linux-6.2.y

ionic: missed doorbell workaround

2023-02-04T03:58:53Z

In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe Signed-off-by: Shannon Nelson Signed-off-by: Jakub Kicinski

ionic: remove the dbid_inuse bitmap

2022-01-25T11:15:09Z

The dbid_inuse bitmap is not useful in this driver so remove it. Fixes: 6461b446f2a0 ("ionic: Add interrupts and doorbells") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: add FW_STOPPING state

2022-01-25T11:15:08Z

Between fw running and fw actually stopped into reset, we need a fw_stopping concept to catch and block some actions while we're transitioning to FW_RESET state. This will help to be sure the fw_up task is not scheduled until after the fw_down task has completed. On some rare occasion timing, it is possible for the fw_up task to try to run before the fw_down task, then not get run after the fw_down task has run, leaving the device in a down state. This is possible if the watchdog goes off in between finding the down transition and starting the fw_down task, where the later watchdog sees the FW is back up and schedules a fw_up task. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: handle vlan id overflow

2021-10-10T09:42:47Z

Add vlans to the existing rx_filter_sync mechanics currently used for managing mac filters. Older versions of our firmware had no enforced limits on the number of vlans that the LIF could request, but requesting large numbers of vlans caused issues in FW memory management, so an arbitrary limit was added in the FW. The FW now returns -ENOSPC when it hits that limit, which the driver needs to handle. Unfortunately, the FW doesn't advertise the vlan id limit, as it does with mac filters, so the driver won't know the limit until it bumps into it. We'll grab the current vlan id count and use that as the limit from there on and thus prevent getting any more -ENOSPC errors. Just as is done for the mac filters, the device puts the device into promiscuous mode when -ENOSPC is seen for vlan ids, and the driver will track the vlans that aren't synced to the FW. When vlans are removed, the driver will retry the un-synced vlans. If all outstanding vlans are synced, the promiscuous mode will be disabled. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: remove mac overflow flags

2021-10-10T09:42:47Z

The overflow flags really aren't useful and we don't need lif struct elements to track them. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: remove debug stats

2021-10-02T13:00:21Z

These debug stats are not really useful, their collection is likely detrimental to performance, and they suck up a lot of memory which never gets used if no one ever enables the priv-flag to print them, so just remove these bits. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: recreate hwstamp queues on ifup

2021-08-28T10:23:09Z

The queues can be freed in ionic_close(). They need to be recreated after ionic_open(). It doesn't need to replay the whole config. It only needs to create the timestamping queues again. Signed-off-by: Allen Hubbe Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: sync the filters in the work task

2021-08-26T08:41:50Z

In order to separate the atomic needs of __dev_uc_sync() and __dev_mc_sync() from the safe rx_mode handling, we need to have the ndo handler manipulate the driver's filter list, and later have the driver sync the filters to the firmware, outside of the atomic context. Here we put __dev_mc_sync() and __dev_uc_sync() back into the ndo callback to give them their netif_addr_lock context and have them update the driver's filter list, flagging changes that should be made to the device filter list. Later, in the rx_mode handler, we read those hints and sync up the device's list as needed. It is possible for multiple add/delete requests to come from the stack before the rx_mode task processes the list, but the handling of the sync status flag should keep everything sorted correctly. For example, if a delete of an existing filter is followed by another add before the rx_mode task is run, as can happen when going in and out of a bond, the add will cancel the delete and no actual changes will be sent to the device. We also add a check in the watchdog to see if there are any stray unsync'd filters, possibly left over from a filter overflow and waiting to get sync'd after some other filter gets removed to make room. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: remove old work task types

2021-08-26T08:41:50Z

With the move of mac filter handling to outside of the ndo_rx_mode context using the IONIC_DW_TYPE_RX_MODE, we no longer are using IONIC_DW_TYPE_RX_ADDR_ADD and IONIC_DW_TYPE_RX_ADDR_DEL and they can be removed. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: catch no ptp support earlier

2021-07-23T20:57:41Z

If PTP configuration is attempted on ports that don't support it, such as VF ports, the driver will return an error status -95, or EOPNOSUPP and print an error message enp98s0: hwstamp set failed: -95 Because some daemons can retry every few seconds, this can end up filling the dmesg log and pushing out other more useful messages. We can catch this issue earlier in our handling and return the error without a log message. Fixes: 829600ce5e4e ("ionic: add ts_config replay") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller