kernel/drivers/net/ethernet/nxp/lpc_eth.c, branch linux-4.3.y

net: lpc_eth: fix warnings caused by enabling unprepared clock

2015-10-05T10:41:12Z

If common clock framework is configured, the driver generates warnings, which are fixed by this change: WARNING: CPU: 0 PID: 1 at linux/drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #141 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc_eth_drv_probe+0xfc/0x99c) [<>] (lpc_eth_drv_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc_eth_driver_init+0x18/0x20) [<>] (lpc_eth_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy Signed-off-by: David S. Miller

net: ethernet: Remove superfluous ether_setup after alloc_etherdev

2014-10-03T22:31:40Z

There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser Acked-by: Nicolas Ferre Signed-off-by: David S. Miller

net: lpc_eth: Fix crash on ip link up

2014-09-02T20:21:55Z

When a link is already up, the following sequence makes the kernel block completely: ip link set dev eth0 down ip link set dev eth0 up This is because on suspended phy, the following lines __lpc_eth_reset(pldat); __lpc_eth_init(pldat); make the LPC ethernet core block (see LPC32x0 manual). The PHY needs to be (re-)activated low-level first. Signed-off-by: Roland Stigge Signed-off-by: David S. Miller

lpc_eth: Use resource_size instead of computation

2014-06-03T23:08:52Z

This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/resource_size.cocci Signed-off-by: Benoit Taine Signed-off-by: David S. Miller

drivers/net: delete non-required instances of include

2014-01-16T19:53:26Z

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()

2013-10-31T14:48:56Z

The code sequence: pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF; pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask; bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask. Signed-off-by: Russell King

net: ethernet: remove unnecessary platform_set_drvdata()

2013-05-28T05:34:51Z

The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Acked-by: Nicolas Ferre Acked-by: Rob Herring Acked-by: Roland Stigge Acked-by: Mugunthan V N Reviewed-by: H Hartley Sweeten Tested-by: Roland Stigge Signed-off-by: David S. Miller

net/nxp/lpc_eth: Drop ifdef CONFIG_OF_NET

2013-04-02T20:43:56Z

Since of_get_mac_address() is now declared even if CONFIG_OF_NET is not configured, the ifdef is no longer necessary and can be removed. Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2013-03-20T16:46:26Z

Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller

lpc_eth: fix error return code in lpc_eth_drv_probe()

2013-03-20T16:19:15Z

Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller