kernel/drivers/net/ethernet/netronome, branch linux-6.18.y

nfp: xsk: fix memory leak in nfp_net_alloc()

2025-10-30T00:38:23Z

In nfp_net_alloc(), the memory allocated for xsk_pools is not freed in the subsequent error paths, leading to a memory leak. Fix that by freeing it in the error path. Fixes: 6402528b7a0b ("nfp: xsk: add AF_XDP zero-copy Rx and Tx support") Signed-off-by: Abdun Nihaal Link: https://patch.msgid.link/20251028160845.126919-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-10-01T08:14:49Z

Cross-merge networking fixes after downstream PR (net-6.17-rc8). Conflicts: tools/testing/selftests/drivers/net/bonding/Makefile 87951b566446 selftests: bonding: add test for passive LACP mode c2377f1763e9 selftests: bonding: add test for LACP actor port priority Adjacent changes: drivers/net/ethernet/cadence/macb.h fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue 89934dbf169e net: macb: Add TAPRIO traffic scheduling support drivers/net/ethernet/cadence/macb_main.c fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue 89934dbf169e net: macb: Add TAPRIO traffic scheduling support Signed-off-by: Paolo Abeni

nfp: fix RSS hash key size when RSS is not supported

2025-09-30T01:33:27Z

The nfp_net_get_rxfh_key_size() function returns -EOPNOTSUPP when devices don't support RSS, and callers treat the negative value as a large positive value since the return type is u32. Return 0 when devices don't support RSS, aligning with the ethtool interface .get_rxfh_key_size() that requires returning 0 in such cases. Fixes: 9ff304bfaf58 ("nfp: add support for reporting CRC32 hash function") Signed-off-by: Kohei Enju Link: https://patch.msgid.link/20250929054230.68120-1-enjuk@amazon.com Signed-off-by: Jakub Kicinski

net: WQ_PERCPU added to alloc_workqueue users

2025-09-23T00:40:30Z

Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly request the use of the per-CPU behavior. Both flags coexist for one release cycle to allow callers to transition their calls. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. All existing users have been updated accordingly. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com Signed-off-by: Jakub Kicinski

tcp: Don't pass hashinfo to socket lookup helpers.

2025-08-26T00:53:35Z

These socket lookup functions required struct inet_hashinfo because they are shared by TCP and DCCP. * __inet_lookup_established() * __inet_lookup_listener() * __inet6_lookup_established() * inet6_lookup_listener() DCCP has gone, and we don't need to pass hashinfo down to them. Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the above 4 functions. Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250822190803.540788-5-kuniyu@google.com Signed-off-by: Jakub Kicinski

nfp: flower: use vmalloc_array() to simplify code

2025-08-19T00:49:51Z

Remove array_size() calls and replace vmalloc() with vmalloc_array() in nfp_flower_metadata_init(). vmalloc_array() is also optimized better, resulting in less instructions being used. Place 'NFP_FL_STATS_ELEM_RS' with the sizeof() parameter as the second argument to vmalloc_array() to avoid -Wcalloc-transposed-args compilation warnings. Signed-off-by: Qianfeng Rong Link: https://patch.msgid.link/20250816090659.117699-3-rongqianfeng@vivo.com Signed-off-by: Jakub Kicinski

eth: nfp: Remove u64_stats_update_begin()/end() for stats fetch

2025-08-19T00:30:01Z

This place is fetching the stats, u64_stats_update_begin()/end() should not be used, and the fetcher of stats is in the same context as the updater of the stats, so don't need any protection Signed-off-by: Li RongQing Link: https://patch.msgid.link/20250815015619.2713-1-lirongqing@baidu.com Signed-off-by: Jakub Kicinski

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-07-30T15:58:55Z

Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...

netronome: don't bother with debugfs_real_fops()

2025-07-09T11:30:28Z

Just turn nfp_tx_q_show() into a wrapper for helper that gets told whether it's tx or xdp via an explicit argument and have nfp_xdp_q_show() call the underlying helper instead. Signed-off-by: Al Viro Reviewed-by: Louis Peens Link: https://lore.kernel.org/r/20250702212205.GF3406663@ZenIV Signed-off-by: Greg Kroah-Hartman

eth: nfp: migrate to new RXFH callbacks

2025-06-21T14:55:00Z

Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Acked-by: Louis Peens Link: https://patch.msgid.link/20250618203823.1336156-8-kuba@kernel.org Signed-off-by: Jakub Kicinski