kernel/drivers/net/ethernet/microsoft/mana/mana_ethtool.c, branch linux-6.18.y

net: mana: Add speed support in mana_get_link_ksettings

2025-06-19T13:13:49Z

Allow mana ethtool get_link_ksettings operation to report the maximum speed supported by the SKU in mbps. The driver retrieves this information by issuing a HWC command to the hardware via mana_query_link_cfg(), which retrieves the SKU's maximum supported speed. These APIs when invoked on hardware that are older/do not support these APIs, the speed would be reported as UNKNOWN. Before: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes After: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 16000Mb/s Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Reviewed-by: Saurabh Singh Sengar Reviewed-by: Long Li Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni

net: mana: Expose additional hardware counters for drop and TC via ethtool.

2025-06-10T21:23:19Z

Add support for reporting additional hardware counters for drop and TC using the ethtool -S interface. These counters include: - Aggregate Rx/Tx drop counters - Per-TC Rx/Tx packet counters - Per-TC Rx/Tx byte counters - Per-TC Rx/Tx pause frame counters The counters are exposed using ethtool_ops->get_ethtool_stats and ethtool_ops->get_strings. This feature/counters are not available to all versions of hardware. Signed-off-by: Dipayaan Roy Reviewed-by: Subbaraya Sundeep Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Jakub Kicinski

net: mana: use ethtool string helpers

2024-10-29T22:52:35Z

The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the data pointer. Signed-off-by: Rosen Penev Reviewed-by: Simon Horman Reviewed-by: Shradha Gupta Link: https://patch.msgid.link/20241022204908.511021-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski

net: mana: Add get_link and get_link_ksettings in ethtool

2024-10-03T11:47:26Z

Add support for the ethtool get_link and get_link_ksettings operations. Display standard port information using ethtool. Before the change: $ethtool enP30832s1 > No data available After the change: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Reviewed-by: Simon Horman Link: https://patch.msgid.link/1727674934-12130-1-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni

net: mana: Improve mana_set_channels() in low mem conditions

2024-09-04T23:28:51Z

The mana_set_channels() function requires detaching the mana driver and reattaching it with changed channel values. During this operation if the system is low on memory, the reattach might fail, causing the network device being down. To avoid this we pre-allocate buffers at the beginning of set operation, to prevent complete network loss Signed-off-by: Shradha Gupta Reviewed-by: Gerhard Engleder Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Implement get_ringparam/set_ringparam for mana

2024-08-27T23:08:44Z

Currently the values of WQs for RX and TX queues for MANA devices are hardcoded to default sizes. Allow configuring these values for MANA devices as ringparam configuration(get/set) through ethtool_ops. Pre-allocate buffers at the beginning of this operation, to prevent complete network loss in low-memory conditions. Signed-off-by: Shradha Gupta Reviewed-by: Haiyang Zhang Reviewed-by: Saurabh Sengar Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Allow variable size indirection table

2024-06-12T18:08:42Z

Allow variable size indirection table allocation in MANA instead of using a constant value MANA_INDIRECT_TABLE_SIZE. The size is now derived from the MANA_QUERY_VPORT_CONFIG and the indirection table is allocated dynamically. Signed-off-by: Shradha Gupta Link: https://lore.kernel.org/r/1718015319-9609-1-git-send-email-shradhagupta@linux.microsoft.com Reviewed-by: Dexuan Cui Reviewed-by: Haiyang Zhang Signed-off-by: Leon Romanovsky

net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool ops

2023-12-14T06:07:16Z

The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski Suggested-by: Jacob Keller Signed-off-by: Ahmed Zaki Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski

net: mana: Fix spelling mistake "enforecement" -> "enforcement"

2023-11-30T04:13:40Z

There is a spelling mistake in struct field hc_tx_err_sqpdid_enforecement. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Shradha Gupta Link: https://lore.kernel.org/r/20231128095304.515492-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski

net :mana :Add remaining GDMA stats for MANA to ethtool

2023-11-27T11:54:33Z

Extend performance counter stats in 'ethtool -S ' for MANA VF to include all GDMA stat counter. Tested-on: Ubuntu22 Testcases: 1. LISA testcase: PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic 2. LISA testcase: PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV Signed-off-by: Shradha Gupta Link: https://lore.kernel.org/r/1700830950-803-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Paolo Abeni