kernel/drivers/net/ethernet/intel/igb, branch linux-4.1.y

igb: Free IRQs when device is hotplugged

2018-03-01T03:09:45Z

[ Upstream commit 888f22931478a05bc81ceb7295c626e1292bf0ed ] Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon hotplugging my kernel would immediately crash due to igb: [ 680.825801] kernel BUG at drivers/pci/msi.c:352! [ 680.828388] invalid opcode: 0000 [#1] SMP [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb] [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6 [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017 [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0 [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286 [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178 [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00 [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298 [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000 [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000 [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0 [ 680.837954] Call Trace: [ 680.838853] pci_disable_msix+0xce/0xf0 [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb] [ 680.840278] igb_remove+0x9d/0x110 [igb] [ 680.840764] pci_device_remove+0x36/0xb0 [ 680.841279] device_release_driver_internal+0x157/0x220 [ 680.841739] pci_stop_bus_device+0x7d/0xa0 [ 680.842255] pci_stop_bus_device+0x2b/0xa0 [ 680.842722] pci_stop_bus_device+0x3d/0xa0 [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20 [ 680.843627] trim_stale_devices+0xf3/0x140 [ 680.844086] trim_stale_devices+0x94/0x140 [ 680.844532] trim_stale_devices+0xa6/0x140 [ 680.845031] ? get_slot_status+0x90/0xc0 [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140 [ 680.846021] acpiphp_hotplug_notify+0x175/0x200 [ 680.846581] ? free_bridge+0x100/0x100 [ 680.847113] acpi_device_hotplug+0x8a/0x490 [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30 [ 680.848076] process_one_work+0x182/0x3a0 [ 680.848543] worker_thread+0x2e/0x380 [ 680.848963] ? process_one_work+0x3a0/0x3a0 [ 680.849373] kthread+0x111/0x130 [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50 [ 680.850188] ret_from_fork+0x1f/0x30 [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0 As it turns out, normally the freeing of IRQs that would fix this is called inside of the scope of __igb_close(). However, since the device is already gone by the point we try to unregister the netdevice from the driver due to a hotplug we end up seeing that the netif isn't present and thus, forget to free any of the device IRQs. So: make sure that if we're in the process of dismantling the netdev, we always allow __igb_close() to be called so that IRQs may be freed normally. Additionally, only allow igb_close() to be called from __igb_close() if it hasn't already been called for the given adapter. Signed-off-by: Lyude Paul Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach") Cc: Todd Fujinaka Cc: Stephen Hemminger Cc: stable@vger.kernel.org Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: check memory allocation failure

2018-03-01T00:32:15Z

[ Upstream commit 18eb86362a52f0af933cc0fd5e37027317eb2d1c ] Check memory allocation failures and return -ENOMEM in such cases, as already done for other memory allocations in this function. This avoids NULL pointers dereference. Signed-off-by: Christophe JAILLET Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: add i211 to i210 PHY workaround

2018-01-17T17:31:03Z

[ Upstream commit 5bc8c230e2a993b49244f9457499f17283da9ec7 ] i210 and i211 share the same PHY but have different PCI IDs. Don't forget i211 for any i210 workarounds. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Workaround for igb i210 firmware issue

2018-01-17T17:30:57Z

[ Upstream commit 4e684f59d760a2c7c716bb60190783546e2d08a1 ] Sometimes firmware may not properly initialize I347AT4_PAGE_SELECT causing the probe of an igb i210 NIC to fail. This patch adds an addition zeroing of this register during igb_get_phy_id to workaround this issue. Thanks for Jochen Henneberg for the idea and original patch. Signed-off-by: Chris J Arges Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Use smp_rmb rather than read_barrier_depends

2017-12-08T23:01:06Z

[ Upstream commit c4cb99185b4cc96c0a1c70104dc21ae14d7e7f28 ] The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with igb as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Fix hw_dbg logging in igb_update_flash_i210

2017-12-07T02:20:10Z

[ Upstream commit 76ed5a8f47476e4984cc8c0c1bc4cee62650f7fd ] Fix an if statement with hw_dbg lines where the logic was inverted with regards to the corresponding return value used in the if statement. Signed-off-by: Hannu Lounento Signed-off-by: Peter Senna Tschudin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: close/suspend race in netif_device_detach

2017-12-07T02:20:10Z

[ Upstream commit 9474933caf21a4cb5147223dca1551f527aaac36 ] Similar to ixgbe, when an interface is part of a namespace it is possible that igb_close() may be called while __igb_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). Extend the rtnl_lock() to protect the call to netif_device_detach() and igb_clear_interrupt_scheme() in __igb_shutdown() and check for netif_device_present() to avoid calling igb_clear_interrupt_scheme() a second time in igb_close(). Also extend the rtnl lock in igb_resume() to netif_device_attach(). Signed-off-by: Todd Fujinaka Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: reset the PHY before reading the PHY ID

2017-12-07T02:20:10Z

[ Upstream commit 182785335447957409282ca745aa5bc3968facee ] Several people have reported firmware leaving the I210/I211 PHY's page select register set to something other than the default of zero. This causes the first accesses, PHY_IDx register reads, to access something else, resulting in device probe failure: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 This problem began for them after a previous patch I submitted was applied: commit 2a3cdead8b408351fa1e3079b220fa331480ffbc Author: Aaron Sierra Date: Tue Nov 3 12:37:09 2015 -0600 igb: Remove GS40G specific defines/functions I personally experienced this problem after attempting to PXE boot from I210 devices using this firmware: Intel(R) Boot Agent GE v1.5.78 Copyright (C) 1997-2014, Intel Corporation Resetting the PHY before reading from it, ensures the page select register is in its default state and doesn't make assumptions about the PHY's register set before the PHY has been probed. Cc: Matwey V. Kornilov Cc: Chris Arges Cc: Jochen Henneberg Signed-off-by: Aaron Sierra Tested-by: Matwey V. Kornilov Tested-by: Chris J Arges Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: do not re-init SR-IOV during probe

2015-10-22T21:43:25Z

commit 6423fc34160939142d72ffeaa2db6408317f54df upstream. During driver probing the following code path is triggered. igb_probe ->igb_sw_init ->igb_probe_vfs ->igb_pci_enable_sriov ->igb_sriov_reinit Doing the SR-IOV re-init is not necessary during probing since we're starting from scratch. Here we can call igb_enable_sriov() right away. Running igb_sriov_reinit() during igb_probe() also seems to cause occasional packet loss on some onboard 82576 NICs. Reproduced on Dell and HP servers with onboard 82576 NICs. Example: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Dell Device [1028:0481] Signed-off-by: Stefan Assmann Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Daniel J Blueman Signed-off-by: Greg Kroah-Hartman

mm: make page pfmemalloc check more robust

2015-09-29T17:26:06Z

commit 2f064f3485cd29633ad1b3cfb00cc519509a3d72 upstream. Commit c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added checks for page->pfmemalloc to __skb_fill_page_desc(): if (page->pfmemalloc && !page->mapping) skb->pfmemalloc = true; It assumes page->mapping == NULL implies that page->pfmemalloc can be trusted. However, __delete_from_page_cache() can set set page->mapping to NULL and leave page->index value alone. Due to being in union, a non-zero page->index will be interpreted as true page->pfmemalloc. So the assumption is invalid if the networking code can see such a page. And it seems it can. We have encountered this with a NFS over loopback setup when such a page is attached to a new skbuf. There is no copying going on in this case so the page confuses __skb_fill_page_desc which interprets the index as pfmemalloc flag and the network stack drops packets that have been allocated using the reserves unless they are to be queued on sockets handling the swapping which is the case here and that leads to hangs when the nfs client waits for a response from the server which has been dropped and thus never arrive. The struct page is already heavily packed so rather than finding another hole to put it in, let's do a trick instead. We can reuse the index again but define it to an impossible value (-1UL). This is the page index so it should never see the value that large. Replace all direct users of page->pfmemalloc by page_is_pfmemalloc which will hide this nastiness from unspoiled eyes. The information will get lost if somebody wants to use page->index obviously but that was the case before and the original code expected that the information should be persisted somewhere else if that is really needed (e.g. what SLAB and SLUB do). [akpm@linux-foundation.org: fix blooper in slub] Fixes: c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") Signed-off-by: Michal Hocko Debugged-by: Vlastimil Babka Debugged-by: Jiri Bohac Cc: Eric Dumazet Cc: David Miller Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman