kernel/drivers/net/ethernet/intel/igb/igb_ethtool.c, branch linux-6.2.y

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-12-09T02:19:59Z

No conflicts. Signed-off-by: Jakub Kicinski

igb: Allocate MSI-X vector when testing

2022-11-30T19:27:22Z

Without this change, the interrupt test fail with MSI-X environment: $ sudo ethtool -t enp0s2 offline [ 43.921783] igb 0000:00:02.0: offline testing starting [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 51.272202] igb 0000:00:02.0: testing shared interrupt [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 4 Loopback test (offline) 0 Link test (on/offline) 0 Here, "4" means an expected interrupt was not delivered. To fix this, route IRQs correctly to the first MSI-X vector by setting IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be masked. The interrupt test now runs properly with this change: $ sudo ethtool -t enp0s2 offline [ 42.762985] igb 0000:00:02.0: offline testing starting [ 50.141967] igb 0000:00:02.0: testing shared interrupt [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test") Signed-off-by: Akihiko Odaki Reviewed-by: Maciej Fijalkowski Tested-by: Gurucharan G (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).

2022-10-29T03:13:54Z

Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Acked-by: Peter Zijlstra (Intel) Signed-off-by: Jakub Kicinski

net: ethernet: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:26Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Reviewed-by: Petr Machata # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

igb: Convert kmap() to kmap_local_page()

2022-05-05T15:37:14Z

kmap() is being deprecated and these usages are all local to the thread so there is no reason kmap_local_page() can't be used. Replace kmap() calls with kmap_local_page(). Signed-off-by: Alaa Mohamed Reviewed-by: Ira Weiny Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

igb: refactor XDP registration

2022-02-07T22:23:01Z

On changing the RX ring parameters igb uses a hack to avoid a warning when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just clears the struct xdp_rxq_info content. Instead, change this to unregister if we're already registered. Align code to the igc code. Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Corinna Vinschen Acked-by: Vinicius Costa Gomes Tested-by: Sandeep Penigalapati Signed-off-by: Tony Nguyen

ethtool: extend ringparam setting/getting API with rx_buf_len

2021-11-22T12:31:49Z

Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller

ethtool: extend coalesce setting uAPI with CQE mode

2021-08-24T14:38:29Z

In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo Signed-off-by: Huazhong Tan Signed-off-by: Jakub Kicinski

igb: Avoid memcpy() over-reading of ETH_SS_STATS

2021-07-23T16:08:11Z

In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen

intel: remove checker warning

2021-05-26T16:11:40Z

The sparse checker (C=2) found an assignment where we were mixing types when trying to convert from data read directly from the device NVM, to an array in CPU order in-memory, which unfortunately the driver tries to do in-place. This is easily solved by using the swap operation instead of an assignment, and is already proven in other Intel drivers to be functionally correct and the same code, just without a sparse warning. The change is the same in all three drivers. Signed-off-by: Jesse Brandeburg Tested-by: Dave Switzer Signed-off-by: Tony Nguyen