kernel/drivers/net/ethernet/intel/ice, branch linux-5.14.y

ice: Fix not stopping Tx queues for VFs

2021-11-17T10:04:38Z

[ Upstream commit b385cca47363316c6d9a74ae9db407bbc281f815 ] When a VF is removed and/or reset its Tx queues need to be stopped from the PF. This is done by calling the ice_dis_vf_qs() function, which calls ice_vsi_stop_lan_tx_rings(). Currently ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA. Unfortunately, this is causing the Tx queues to not be disabled in some cases and when the VF tries to re-enable/reconfigure its Tx queues over virtchnl the op is failing. This is because a VF can be reset and/or removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues were already configured via ice_vsi_cfg_single_txq() in the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. This was causing the following error message when loading the ice driver, creating VFs, and modifying VF trust in an endless loop: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by always calling ice_dis_vf_qs() and silencing the error message in ice_vsi_stop_tx_ring() since the calling code ignores the return anyway. Also, all other places that call ice_vsi_stop_tx_ring() catch the error, so this doesn't affect those flows since there was no change to the values the function returns. Other solutions were considered (i.e. tracking which VF queues had been "started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed more complicated than it was worth. This solution also brings in the chance for other unexpected conditions due to invalid state bit checks. So, the proposed solution seemed like the best option since there is no harm in failing to stop Tx queues that were never started. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: Brett Creeley Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: Fix replacing VF hardware MAC to existing MAC filter

2021-11-17T10:04:38Z

[ Upstream commit ce572a5b88d5ca6737b5e23da9892792fd708ad3 ] VF was not able to change its hardware MAC address in case the new address was already present in the MAC filter list. Change the handling of VF add mac request to not return if requested MAC address is already present on the list and check if its hardware MAC needs to be updated in this case. Fixes: ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)") Signed-off-by: Sylwester Dziedziuch Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: Move devlink port to PF/VF struct

2021-11-17T10:03:49Z

[ Upstream commit 2ae0aa4758b0f4a247d45cb3bf01548a7f396751 ] Keeping devlink port inside VSI data structure causes some issues. Since VF VSI is released during reset that means that we have to unregister devlink port and register it again every time reset is triggered. With the new changes in devlink API it might cause deadlock issues. After calling devlink_port_register/devlink_port_unregister devlink API is going to lock rtnl_mutex. It's an issue when VF reset is triggered in netlink operation context (like setting VF MAC address or VLAN), because rtnl_lock is already taken by netlink. Another call of rtnl_lock from devlink API results in dead-lock. By moving devlink port to PF/VF we avoid creating/destroying it during reset. Since this patch, devlink ports are created during ice_probe, destroyed during ice_remove for PF and created during ice_repr_add, destroyed during ice_repr_rem for VF. Signed-off-by: Wojciech Drewek Tested-by: Sandeep Penigalapati Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: check whether PTP is initialized in ice_ptp_release()

2021-11-02T18:50:57Z

commit fd1b5beb177a8372cea2a0d014835491e4886f77 upstream. PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu Reviewed-by: Jacob Keller Tested-by: Gurucharan G Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

ice: Respond to a NETDEV_UNREGISTER event for LAG

2021-11-02T18:50:57Z

commit 6a8b357278f5f8b9817147277ab8f12879dce8a8 upstream. When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

ice: Add missing E810 device ids

2021-10-27T07:59:38Z

[ Upstream commit 7dcf78b870be6418d72bb1c4d4924bf0f5ca5052 ] As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen Acked-by: Jesse Brandeburg Acked-by: Paul Menzel Signed-off-by: Sasha Levin

ice: Print the api_patch as part of the fw.mgmt.api

2021-10-27T07:59:35Z

[ Upstream commit b726ddf984a56a385c9df406a66c221f3a77c951 ] Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get") Signed-off-by: Brett Creeley Tested-by: Gurucharan G Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: fix getting UDP tunnel entry

2021-10-27T07:59:35Z

[ Upstream commit e4c2efa1393c6f1fbfabf91d1d83fcb4ae691ccb ] Correct parameters order in call to ice_tunnel_idx_to_entry function. Entry in sparse port table is correct when the idx is 0. For idx 1 one correct entry should be skipped, for idx 2 two of them should be skipped etc. Change if condition to be true when idx is 0, which means that previous valid entry of this tunnel type were skipped. Fixes: b20e6c17c468 ("ice: convert to new udp_tunnel infrastructure") Signed-off-by: Michal Swiatkowski Tested-by: Gurucharan G Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: Avoid crash from unnecessary IDA free

2021-10-27T07:59:35Z

[ Upstream commit 73e30a62b19b9fbb4e6a3465c59da186630d5f2e ] In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. Fixes: d25a0fc41c1f9 ("ice: Initialize RDMA support") Reported-by: Jun Miao Signed-off-by: Dave Ertman Tested-by: Jesse Brandeburg Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: Fix failure to re-add LAN/RDMA Tx queues

2021-10-27T07:59:34Z

[ Upstream commit ff7e93219442f5ac5b2cfd33e4fe4b7d5942f957 ] Currently if the VSI is rebuilt/removed and the RDMA PF driver is active the RDMA Tx queue scheduler node configuration will not be cleaned up. This will cause the rebuild/re-add of the VSI to fail due to the software structures not being correctly cleaned up for the VSI index. Fix this by always calling ice_rm_vsi_rdma_cfg() for all VSI. If there are no RDMA scheduler nodes created, then there is no harm in calling ice_rm_vsi_rdma_cfg(). This change applies to all VSI types, so if RDMA support is added for other VSI types they will also get this change. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Brett Creeley Tested-by: Jerzy Wiktor Jurkowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin