kernel/drivers/net/ethernet/intel/ice/ice_switch.c, branch linux-6.2.y

ice: Fix ice_cfg_rdma_fltr() to only update relevant fields

2023-04-06T10:12:37Z

[ Upstream commit d94dbdc4e0209b5e7d736ab696f8d635b034e3ee ] The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e724a0 ("ice: Implement iidc operations") Co-developed-by: Robert Malz Signed-off-by: Robert Malz Signed-off-by: Brett Creeley Signed-off-by: Jesse Brandeburg Reviewed-by: Piotr Raczynski Tested-by: Jakub Andrysiak Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: switch: fix potential memleak in ice_add_adv_recipe()

2023-02-06T23:13:02Z

When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Zhang Changzhong Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen Reviewed-by: Leon Romanovsky

ice: Add L2TPv3 hardware offload support

2022-09-20T07:13:38Z

Add support for offloading packets based on L2TPv3 session id in switchdev mode. Example filter: tc filter add dev $PF1 ingress prio 1 protocol ip flower ip_proto l2tp \ l2tpv3_sid 1234 skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to be able to specify l2tpv3_sid. ICE COMMS DDP package is required to create a filter as it contains L2TPv3 profiles. Reviewed-by: Michal Swiatkowski Signed-off-by: Marcin Szycik Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni

ice: switch: Simplify memory allocation

2022-09-06T20:55:47Z

'rbuf' is locale to the ice_get_initial_sw_cfg() function. There is no point in using devm_kzalloc()/devm_kfree(). use kzalloc()/kfree() instead. Signed-off-by: Christophe JAILLET Reviewed-by: Michal Swiatkowski Signed-off-by: Tony Nguyen

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

2022-08-23T03:10:50Z

Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ice) This series contains updates to ice driver only. Jesse and Anatolii add support for controlling FCS/CRC stripping via ethtool. Anirudh allows for 100M speeds on devices which support it. Sylwester removes ucast_shared field and the associated dead code related to it. Mikael removes non-inclusive language from the driver. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove non-inclusive language ice: Remove ucast_shared ice: Allow 100M speeds for some devices ice: Implement FCS/CRC and VLAN stripping co-existence policy ice: Implement control of FCS/CRC stripping ==================== Link: https://lore.kernel.org/r/20220818155207.996297-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: Remove ucast_shared

2022-08-18T15:23:44Z

Remove ucast_shared as it was always true. Remove the code depending on ucast_shared from ice_add_mac and ice_remove_mac. Remove ice_find_ucast_rule_entry function as it was only used when ucast_shared was set to false. Signed-off-by: Sylwester Dziedziuch Signed-off-by: Jedrzej Jagielski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: Ignore EEXIST when setting promisc mode

2022-08-17T16:30:23Z

Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart Tested-by: Igor Raits Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: Fix double VLAN error when entering promisc mode

2022-08-17T16:29:50Z

Avoid enabling or disabling VLAN 0 when trying to set promiscuous VLAN mode if double VLAN mode is enabled. This fix is needed because the driver tries to add the VLAN 0 filter twice (once for inner and once for outer) when double VLAN mode is enabled. The filter program is rejected by the firmware when double VLAN is enabled, because the promiscuous filter only needs to be set once. This issue was missed in the initial implementation of double VLAN mode. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart Tested-by: Igor Raits Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

Merge tag 'bitmap-6.0-rc1' of https://github.com/norov/linux

2022-08-08T00:52:35Z

Pull bitmap updates from Yury Norov: - fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo) - optimize out non-atomic bitops on compile-time constants (Alexander Lobakin) - cleanup bitmap-related headers (Yury Norov) - x86/olpc: fix 'logical not is only applied to the left hand side' (Alexander Lobakin) - lib/nodemask: inline wrappers around bitmap (Yury Norov) * tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits) lib/nodemask: inline next_node_in() and node_random() powerpc: drop dependency on in archrandom.h x86/olpc: fix 'logical not is only applied to the left hand side' lib/cpumask: move some one-line wrappers to header file headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure headers/deps: mm: Split out of headers/deps: mm: Optimize header dependencies lib/cpumask: move trivial wrappers around find_bit to the header lib/cpumask: change return types to unsigned where appropriate cpumask: change return types to bool where appropriate lib/bitmap: change type of bitmap_weight to unsigned long lib/bitmap: change return types to bool where appropriate arm: align find_bit declarations with generic kernel iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) lib/test_bitmap: test the tail after bitmap_to_arr64() lib/bitmap: fix off-by-one in bitmap_to_arr64() lib: test_bitmap: add compile-time optimization/evaluations assertions bitmap: don't assume compiler evaluates small mem*() builtins calls net/ice: fix initializing the bitmap in the switch code bitops: let optimize out non-atomic bitops on compile-time constants ...

ice: Introduce enabling promiscuous mode on multiple VF's

2022-07-28T18:44:22Z

In current implementation default VSI switch filter is only able to forward traffic to a single VSI. This limits promiscuous mode with private flag 'vf-true-promisc-support' to a single VF. Enabling it on the second VF won't work. Also allmulticast support doesn't seem to be properly implemented when vf-true-promisc-support is true. Use standard ice_add_rule_internal() function that already implements forwarding to multiple VSI's instead of constructing AQ call manually. Add switch filter for allmulticast mode when vf-true-promisc-support is enabled. The same filter is added regardless of the flag - it doesn't matter for this case. Remove unnecessary fields in switch structure. From now on book keeping will be done by ice_add_rule_internal(). Refactor unnecessarily passed function arguments. To test: 1) Create 2 VM's, and two VF's. Attach VF's to VM's. 2) Enable promiscuous mode on both of them and check if traffic is seen on both of them. Signed-off-by: Michal Wilczynski Tested-by: Marek Szlosek Signed-off-by: Tony Nguyen