kernel/drivers/net/ethernet/intel/ice/ice_devids.h, branch linux-6.18.y

ice: add E835 device IDs

2025-07-18T16:02:28Z

E835 is an enhanced version of the E830. It continues to use the same set of commands, registers and interfaces as other devices in the 800 Series. Following device IDs are added: - 0x1248: Intel(R) Ethernet Controller E835-CC for backplane - 0x1249: Intel(R) Ethernet Controller E835-CC for QSFP - 0x124A: Intel(R) Ethernet Controller E835-CC for SFP - 0x1261: Intel(R) Ethernet Controller E835-C for backplane - 0x1262: Intel(R) Ethernet Controller E835-C for QSFP - 0x1263: Intel(R) Ethernet Controller E835-C for SFP - 0x1265: Intel(R) Ethernet Controller E835-L for backplane - 0x1266: Intel(R) Ethernet Controller E835-L for QSFP - 0x1267: Intel(R) Ethernet Controller E835-L for SFP Reviewed-by: Konrad Knitter Reviewed-by: Simon Horman Signed-off-by: Dawid Osuchowski Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: update E830 device ids and comments

2024-05-06T16:18:48Z

Update existing E830 device ids and comments to align with new naming 'C' for 100G and 'CC' for 200G. Reviewed-by: Wojciech Drewek Signed-off-by: Paul Greenwalt Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: add additional E830 device ids

2024-05-06T16:11:17Z

Add support for additional E830 device ids which are supported by the driver: - 0x12D5: Intel(R) Ethernet Controller E830-C for backplane - 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP - 0x12DA: Intel(R) Ethernet Controller E830-C for SFP - 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane - 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP - 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP Reviewed-by: Wojciech Drewek Signed-off-by: Paul Greenwalt Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: introduce new E825C devices family

2024-02-12T17:57:06Z

Introduce new Intel Ethernet E825C family devices. Add new PCI device IDs which are going to be supported by the driver: - 579C: Intel(R) Ethernet Connection E825-C for backplane - 579D: Intel(R) Ethernet Connection E825-C for QSFP - 579E: Intel(R) Ethernet Connection E825-C for SFP - 579F: Intel(R) Ethernet Connection E825-C for SGMII Add helper function ice_is_e825c() to verify if the running device belongs to E825C family. Co-developed-by: Jan Glaza Signed-off-by: Jan Glaza Co-developed-by: Michal Michalik Signed-off-by: Michal Michalik Signed-off-by: Grzegorz Nitka Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: Add E830 device IDs, MAC type and registers

2023-10-27T03:32:38Z

E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech Signed-off-by: Milena Olech Co-developed-by: Dan Nowlin Signed-off-by: Dan Nowlin Co-developed-by: Scott Taylor Signed-off-by: Scott Taylor Co-developed-by: Pawel Chmielewski Signed-off-by: Pawel Chmielewski Reviewed-by: Simon Horman Signed-off-by: Paul Greenwalt Tested-by: Tony Brelinski Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski

ice: support features on new E810T variants

2022-09-28T18:40:57Z

Add new sub-device ids required for proper initialization of features on E810T devices supported by ice driver. Signed-off-by: Arkadiusz Kubalewski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: handle E822 generic device ID in PLDM header

2022-07-12T16:25:34Z

The driver currently presumes that the record data in the PLDM header of the firmware image will match the device ID of the running device. This is true for E810 devices. It appears that for E822 devices that this is not guaranteed to be true. Fix this by adding a check for the generic E822 device. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Signed-off-by: Paul M Stillwell Jr Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-10-22T10:41:16Z

Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller

ice: Add missing E810 device ids

2021-10-20T16:07:22Z

As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen Acked-by: Jesse Brandeburg Acked-by: Paul Menzel

ice: Add support for SMA control multiplexer

2021-10-14T14:37:30Z

E810-T adapters have two external bidirectional SMA connectors and two internal unidirectional U.FL connectors. Multiplexing between U.FL and SMA and SMA direction is controlled using the PCA9575 expander. Add support for the PCA9575 detection and control of the respective pins of the SMA/U.FL multiplexer using the GPIO AQ API. Signed-off-by: Maciej Machnikowski Tested-by: Sunitha Mekala Signed-off-by: Tony Nguyen