kernel/drivers/net/ethernet/intel/ice/ice_dcb_lib.c, branch linux-6.18.y

ice, libie: move generic adminq descriptors to lib

2025-07-24T16:22:26Z

The descriptor structure is the same in ice, ixgbe and i40e. Move it to common libie header to use it across different driver. Leave device specific adminq commands in separate folders. This lead to a change that need to be done in filling/getting descriptor: - previous: struct specific_desc *cmd; cmd = &desc.params.specific_desc; - now: struct specific_desc *cmd; cmd = libie_aq_raw(&desc); Do this changes across the driver to allow clean build. The casting only have to be done in case of specific descriptors, for generic one union can still be used. Changes beside code moving: - change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too) - remove shift variables not otherwise needed (in libie_aq_flags) - fill/get descriptor data based on desc.params.raw whenever the descriptor isn't defined in libie - move defines from the libie_aq_sth structure outside - add libie_aq_raw helper and use it instead of explicit casting Reviewed by: Przemek Kitszel Reviewed-by: Aleksandr Loktionov Signed-off-by: Michal Swiatkowski Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux

2025-05-13T01:48:27Z

Tony Nguyen says: ==================== Prepare for Intel IPU E2000 (GEN3) This is the first part in introducing RDMA support for idpf. ---------------------------------------------------------------- Tatyana Nikolova says: To align with review comments, the patch series introducing RDMA RoCEv2 support for the Intel Infrastructure Processing Unit (IPU) E2000 line of products is going to be submitted in three parts: 1. Modify ice to use specific and common IIDC definitions and pass a core device info to irdma. 2. Add RDMA support to idpf and modify idpf to use specific and common IIDC definitions and pass a core device info to irdma. 3. Add RDMA RoCEv2 support for the E2000 products, referred to as GEN3 to irdma. This first part is a 5 patch series based on the original "iidc/ice/irdma: Update IDC to support multiple consumers" patch to allow for multiple CORE PCI drivers, using the auxbus. Patches: 1) Move header file to new name for clarity and replace ice specific DSCP define with a kernel equivalent one in irdma 2) Unify naming convention 3) Separate header file into common and driver specific info 4) Replace ice specific DSCP define with a kernel equivalent one in ice 5) Implement core device info struct and update drivers to use it ---------------------------------------------------------------- v1: https://lore.kernel.org/20250505212037.2092288-1-anthony.l.nguyen@intel.com IWL reviews: [v5] https://lore.kernel.org/20250416021549.606-1-tatyana.e.nikolova@intel.com [v4] https://lore.kernel.org/20250225050428.2166-1-tatyana.e.nikolova@intel.com [v3] https://lore.kernel.org/20250207194931.1569-1-tatyana.e.nikolova@intel.com [v2] https://lore.kernel.org/20240824031924.421-1-tatyana.e.nikolova@intel.com [v1] https://lore.kernel.org/20240724233917.704-1-tatyana.e.nikolova@intel.com * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux: iidc/ice/irdma: Update IDC to support multiple consumers ice: Replace ice specific DSCP mapping num with a kernel define iidc/ice/irdma: Break iidc.h into two headers iidc/ice/irdma: Rename to iidc_* convention iidc/ice/irdma: Rename IDC header file ==================== Link: https://patch.msgid.link/20250509200712.2911060-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

iidc/ice/irdma: Update IDC to support multiple consumers

2025-05-09T18:35:43Z

In preparation of supporting more than a single core PCI driver for RDMA, move ice specific structs like qset_params, qos_info and qos_params from iidc_rdma.h to iidc_rdma_ice.h. Previously, the ice driver was just exporting its entire PF struct to the auxiliary driver, but since each core driver will have its own different PF struct, implement a universal struct that all core drivers can provide to the auxiliary driver through the probe call. Reviewed-by: Przemek Kitszel Signed-off-by: Dave Ertman Co-developed-by: Mustafa Ismail Signed-off-by: Mustafa Ismail Co-developed-by: Shiraz Saleem Signed-off-by: Shiraz Saleem Co-developed-by: Tatyana Nikolova Signed-off-by: Tatyana Nikolova Signed-off-by: Tony Nguyen

iidc/ice/irdma: Rename to iidc_* convention

2025-04-30T20:09:06Z

In preparation of supporting more than a single core PCI driver for RDMA, homogenize naming to iidc_rdma_* and IIDC_RDMA_* form. Reviewed-by: Przemek Kitszel Signed-off-by: Dave Ertman Signed-off-by: Tatyana Nikolova Signed-off-by: Tony Nguyen

ice: receive LLDP on trusted VFs

2025-04-11T16:45:30Z

When a trusted VF tries to configure an LLDP multicast address, configure a rule that would mirror the traffic to this VF, untrusted VFs are not allowed to receive LLDP at all, so the request to add LLDP MAC address will always fail for them. Add a forwarding LLDP filter to a trusted VF when it tries to add an LLDP multicast MAC address. The MAC address has to be added after enabling trust (through restarting the LLDP service). Signed-off-by: Mateusz Pacuszka Co-developed-by: Larysa Zaremba Signed-off-by: Larysa Zaremba Reviewed-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen

ice: add new VSI type for subfunctions

2024-09-06T17:52:19Z

Add required plumbing for new VSI type dedicated to devlink subfunctions. Make sure that the vsi is properly configured and destroyed. Also allow loading XDP and AF_XDP sockets. The first implementation of devlink subfunctions supports only one Tx/Rx queue pair per given subfunction. Reviewed-by: Simon Horman Reviewed-by: Przemek Kitszel Reviewed-by: Wojciech Drewek Signed-off-by: Piotr Raczynski Signed-off-by: Michal Swiatkowski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen

ice: move ice_devlink.[ch] to devlink folder

2024-04-01T15:58:09Z

Only moving whole files, fixing Makefile and bunch of includes. Some changes to ice_devlink file was done even in representor part (Tx topology), so keep it as final patch to not mess up with rebasing. After moving to devlink folder there is no need to have such long name for these files. Rename them to simple devlink. Reviewed-by: Aleksandr Loktionov Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: remove switchdev control plane VSI

2024-03-25T20:08:05Z

For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik Signed-off-by: Michal Swiatkowski Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen

ice: field prep conversion

2023-12-18T19:20:26Z

Refactor ice driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Several places I changed to OR into a single variable with |= instead of using a multi-line statement with trailing OR operators, as it (subjectively) makes the code clearer. A local variable vmvf_and_timeout was created and used to avoid multiple logical ORs being __le16 converted, which shortened some lines and makes the code cleaner. Also clean up a couple of places where conversions were made to have the code read more clearly/consistently. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall CC: Alexander Lobakin Reviewed-by: Marcin Szycik Reviewed-by: Simon Horman Signed-off-by: Jesse Brandeburg Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: Fix undersized tx_flags variable

2023-05-12T08:27:44Z

As not all ICE_TX_FLAGS_* fit in current 16-bit limited tx_flags field that was introduced in the Fixes commit, VLAN-related information would be discarded completely. As such, creating a vlan and trying to run ping through would result in no traffic passing. Fix that by refactoring tx_flags variable into flags only and a separate variable that holds VLAN ID. As there is some space left, type variable can fit between those two. Pahole reports no size change to ice_tx_buf struct. Fixes: aa1d3faf71a6 ("ice: Robustify cleaning/completing XDP Tx buffers") Signed-off-by: Jan Sokolowski Reviewed-by: Alexander Lobakin Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller