kernel/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h, branch linux-6.18.y

ice: add E830 Earliest TxTime First Offload support

2025-09-19T15:42:07Z

E830 supports Earliest TxTime First (ETF) hardware offload, which is configured via the ETF Qdisc on a per-queue basis (see tc-etf(8)). ETF introduces a new Tx flow mechanism that utilizes a timestamp ring (tstamp_ring) alongside the standard Tx ring. This timestamp ring is used to indicate when hardware will transmit a packet. Tx Time is supported on the first 2048 Tx queues of the device, and the NVM image limits the maximum number of Tx queues to 2048 for the device. The allocation and initialization of the timestamp ring occur when the feature is enabled on a specific Tx queue via tc-etf. The requested Tx Time queue index cannot be greater than the number of Tx queues (vsi->num_txq). To support ETF, the following flags and bitmap are introduced: - ICE_F_TXTIME: Device feature flag set for E830 NICs, indicating ETF support. - txtime_txqs: PF-level bitmap set when ETF is enabled and cleared when disabled for a specific Tx queue. It is used by ice_is_txtime_ena() to check if ETF is allocated and configured on any Tx queue, which is checked during Tx ring allocation. - ICE_TX_FLAGS_TXTIME: Per Tx ring flag set when ETF is allocated and configured for a specific Tx queue. It determines ETF status during packet transmission and is checked by ice_is_txtime_ena() to verify if ETF is enabled on any Tx queue. Due to a hardware issue that can result in a malicious driver detection event, additional timestamp descriptors are required when wrapping around the timestamp ring. Up to 64 additional timestamp descriptors are reserved, reducing the available Tx descriptors. To accommodate this, ICE_MAX_NUM_DESC_BY_MAC is introduced, defining: - E830: Maximum Tx descriptor count of 8096 (8K - 32 - 64 for timestamp fetch descriptors). - E810 and E82X: Maximum Tx descriptor count of 8160 (8K - 32). Reviewed-by: Aleksandr Loktionov Co-developed-by: Alice Michael Signed-off-by: Alice Michael Signed-off-by: Paul Greenwalt Acked-by: Maciej Fijalkowski Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

libie, ice: move fwlog admin queue to libie

2025-09-11T19:10:25Z

Copy the code and: - change ICE_AQC to LIBIE_AQC - change ice_aqc to libie_aqc - move definitions outside the structures Reviewed-by: Przemek Kitszel Signed-off-by: Michal Swiatkowski Tested-by: Rinitha S (A Contingent worker at Intel) Reviewed-by: Simon Horman Signed-off-by: Tony Nguyen

ice: Implement support for SRIOV VFs across Active/Active bonds

2025-08-14T22:50:47Z

This patch implements the software flows to handle SRIOV VF communication across an Active/Active link aggregate. The same restrictions apply as are in place for the support of Active/Backup bonds. - the two interfaces must be on the same NIC - the FW LLDP engine needs to be disabled - the DDP package that supports VF LAG must be loaded on device - the two interfaces must have the same QoS config - only the first interface added to the bond will have VF support - the interface with VFs must be in switchdev mode With the additional requirement of - the version of the FW on the NIC needs to have VF Active/Active support This requirement is indicated in the capabilities struct associated with the NVM loaded on the NIC. The balancing of traffic between the two interfaces is done on a queue basis. Taking the queues allocated to all of the VFs as a whole, one half of them will be distributed to each interface. When a link goes down, then the queues allocated to the down interface will migrate to the active port. When the down port comes back up, then the same queues as were originally assigned there will be moved back. Co-developed-by: Marcin Szycik Signed-off-by: Marcin Szycik Signed-off-by: Dave Ertman Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen

ice, libie: move generic adminq descriptors to lib

2025-07-24T16:22:26Z

The descriptor structure is the same in ice, ixgbe and i40e. Move it to common libie header to use it across different driver. Leave device specific adminq commands in separate folders. This lead to a change that need to be done in filling/getting descriptor: - previous: struct specific_desc *cmd; cmd = &desc.params.specific_desc; - now: struct specific_desc *cmd; cmd = libie_aq_raw(&desc); Do this changes across the driver to allow clean build. The casting only have to be done in case of specific descriptors, for generic one union can still be used. Changes beside code moving: - change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too) - remove shift variables not otherwise needed (in libie_aq_flags) - fill/get descriptor data based on desc.params.raw whenever the descriptor isn't defined in libie - move defines from the libie_aq_sth structure outside - add libie_aq_raw helper and use it instead of explicit casting Reviewed by: Przemek Kitszel Reviewed-by: Aleksandr Loktionov Signed-off-by: Michal Swiatkowski Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: add 40G speed to Admin Command GET PORT OPTION

2025-07-18T16:02:28Z

Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code to process this new option in both the devlink and the Admin Queue Command GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on. This feature allows the driver to correctly report configuration options for 2x40G on E823 and other cards in the future via devlink. Example command: devlink port split pci/0000:01:00.0/0 count 2 Example dmesg: ice 0000:01:00.0: Available port split options and max port speeds (Gbps): ice 0000:01:00.0: Status Split Quad 0 Quad 1 ice 0000:01:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 ice 0000:01:00.0: 2 40 - - - 40 - - - ice 0000:01:00.0: 2 50 - 50 - - - - - ice 0000:01:00.0: 4 25 25 25 25 - - - - ice 0000:01:00.0: 4 25 25 - - 25 25 - - ice 0000:01:00.0: Active 8 10 10 10 10 10 10 10 10 ice 0000:01:00.0: 1 100 - - - - - - - Signed-off-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Reviewed-by: Simon Horman Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: add functions to get and set Tx queue context

2025-07-10T21:33:33Z

The live migration driver will need to save and restore the Tx queue context state from the hardware registers. This state contains both static fields which do not change during Tx traffic as well as dynamic fields which may change during Tx traffic. Unlike the Rx context, the Tx queue context is accessed indirectly from GLCOMM_QTX_CNTX_CTL and GLCOMM_QTX_CNTX_DATA registers. These registers are shared by multiple PFs on the same PCIe card. Multiple PFs cannot safely access the registers simultaneously, and there is no hardware semaphore or logic to control access. To handle this, introduce the txq_ctx_lock to the ice_adapter structure. This is similar to the ptp_gltsyn_time_lock. All PFs on the same adapter share this structure, and use it to serialize access to the registers to prevent error. Add a new functions to get and set the Tx queue context through the GLCOMM_QTX_CNTX_CTL interface. The hardware context values are stored in the registers using the same packed format as the Admin Queue buffer. The hardware buffer is 40 bytes wide, as it contains an additional 18 bytes of internal state not sent with the Admin Queue buffer. For this reason, a separate typedef and packing function must be used. We can share the same packed fields definitions because we never need to unpack the internal state. This is preferred, as it ensures the internal state is zero'd when writing into HW, and avoids issues with reading by u32 registers into a buffer of 22 bytes in length. Thanks to the typedefs, misuse of the API with the wrong size buffer can easily be caught at compile time. Note reading this data from hardware is essential because the current Tx queue context may be different from the context as initially programmed by the driver during VF initialization. When migrating a VF we must ensure the target VF has identical context as the source VF did. Co-developed-by: Yahui Cao Signed-off-by: Yahui Cao Signed-off-by: Jacob Keller Reviewed-by: Madhu Chittim Reviewed-by: Przemek Kitszel Signed-off-by: Tony Nguyen

ice: add ref-sync dpll pins

2025-06-27T23:38:02Z

Implement reference sync input pin get/set callbacks, allow user space control over dpll pin pairs capable of reference sync support. Reviewed-by: Milena Olech Signed-off-by: Arkadiusz Kubalewski Link: https://patch.msgid.link/20250626135219.1769350-4-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski

ice: add phase offset monitor for all PPS dpll inputs

2025-06-14T01:21:57Z

Implement a new admin command and helper function to handle and obtain CGU measurements for input pins. Add new callback operations to control the dpll device-level feature "phase offset monitor," allowing it to be enabled or disabled. If the feature is enabled, provide users with measured phase offsets and notifications. Initialize PPS DPLL with new callback operations if the feature is supported by the firmware. Reviewed-by: Milena Olech Signed-off-by: Arkadiusz Kubalewski Acked-by: Vadim Fedorenko Link: https://patch.msgid.link/20250612152835.1703397-4-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski

ice: remove invalid parameter of equalizer

2025-01-24T18:49:42Z

It occurred that in the commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") the invalid DRATE parameter for reading has been added. The output of the command: $ ethtool -d returns the garbage value in the place where DRATE value should be stored. Remove mentioned parameter to prevent return of corrupted data to userspace. Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") Signed-off-by: Mateusz Polchlopek Reviewed-by: Michal Swiatkowski Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

2025-01-18T03:45:35Z

Tony Nguyen says: ==================== ice: support FW Recovery Mode Konrad Knitter says: Enable update of card in FW Recovery Mode * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: support FW Recovery Mode devlink: add devl guard pldmfw: enable selected component update ==================== Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski