kernel/drivers/net/ethernet/intel/ice/devlink/devlink.c, branch linux-rolling-lts

drivers: net: ice: fix devlink parameters get without irdma

2026-03-19T15:08:19Z

[ Upstream commit bd98c6204d1195973b1760fe45860863deb6200c ] If CONFIG_IRDMA isn't enabled but there are ice NICs in the system, the driver will prevent full devlink dev param show dump because its rdma get callbacks return ENODEV and stop the dump. For example: $ devlink dev param show pci/0000:82:00.0: name msix_vec_per_pf_max type generic values: cmode driverinit value 2 name msix_vec_per_pf_min type generic values: cmode driverinit value 2 kernel answers: No such device Returning EOPNOTSUPP allows the dump to continue so we can see all devices' devlink parameters. Fixes: c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") Signed-off-by: Nikolay Aleksandrov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: add missing ice_deinit_hw() in devlink reinit path

2026-01-30T09:32:18Z

[ Upstream commit 42fb5f3deb582cb96440e4683745017dbabb83d6 ] devlink-reload results in ice_init_hw failed error, and then removing the ice driver causes a NULL pointer dereference. [ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16 ... [ +0.000001] Call Trace: [ +0.000003] [ +0.000006] ice_unload+0x8f/0x100 [ice] [ +0.000081] ice_remove+0xba/0x300 [ice] Commit 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but ice_devlink_reinit_up() still calls ice_init_hw(). Since the control queues are not uninitialized, ice_init_hw() fails with -EBUSY. Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with ice_init_hw() in ice_devlink_reinit_up(). Fixes: 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Signed-off-by: Paul Greenwalt Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: move ice_deinit_dev() to the end of deinit paths

2025-12-18T13:02:37Z

[ Upstream commit 8a37f9e2ff40f4a4fa8def22febefe4daf58e573 ] ice_deinit_dev() takes care of turning off adminq processing, which is much needed during driver teardown (remove, reset, error path). Move it to the very end where applicable. For example, ice_deinit_hw() called after adminq deinit slows rmmod on my two-card setup by about 60 seconds. ice_init_dev() and ice_deinit_dev() scopes were reduced by previous commits of the series, with a final touch of extracting ice_init_dev_hw() out now (there is no deinit counterpart). Note that removed ice_service_task_stop() call from ice_remove() is placed in the ice_deinit_dev() (and stopping twice makes no sense). Signed-off-by: Przemek Kitszel Reviewed-by: Aleksandr Loktionov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Stable-dep-of: 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") Signed-off-by: Sasha Levin

ice: move ice_init_pf() out of ice_init_dev()

2025-12-18T13:02:37Z

[ Upstream commit ef825bdb4605742c4efc03f67d930e80c42f33cb ] Move ice_init_pf() out of ice_init_dev(). Do the same for deinit counterpart. Signed-off-by: Przemek Kitszel Reviewed-by: Aleksandr Loktionov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Stable-dep-of: 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") Signed-off-by: Sasha Levin

ice: use libie_aq_str

2025-07-24T16:40:49Z

Simple: s/ice_aq_str/libie_aq_str Add libie_aminq module in ice Kconfig. Reviewed-by: Przemek Kitszel Signed-off-by: Michal Swiatkowski Reviewed-by: Aleksandr Loktionov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

iidc/ice/irdma: Update IDC to support multiple consumers

2025-05-09T18:35:43Z

In preparation of supporting more than a single core PCI driver for RDMA, move ice specific structs like qset_params, qos_info and qos_params from iidc_rdma.h to iidc_rdma_ice.h. Previously, the ice driver was just exporting its entire PF struct to the auxiliary driver, but since each core driver will have its own different PF struct, implement a universal struct that all core drivers can provide to the auxiliary driver through the probe call. Reviewed-by: Przemek Kitszel Signed-off-by: Dave Ertman Co-developed-by: Mustafa Ismail Signed-off-by: Mustafa Ismail Co-developed-by: Shiraz Saleem Signed-off-by: Shiraz Saleem Co-developed-by: Tatyana Nikolova Signed-off-by: Tatyana Nikolova Signed-off-by: Tony Nguyen

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

2025-02-07T01:34:36Z

Tony Nguyen says: ==================== ice: managing MSI-X in driver Michal Swiatkowski says: It is another try to allow user to manage amount of MSI-X used for each feature in ice. First was via devlink resources API, it wasn't accepted in upstream. Also static MSI-X allocation using devlink resources isn't really user friendly. This try is using more dynamic way. "Dynamic" across whole kernel when platform supports it and "dynamic" across the driver when not. To achieve that reuse global devlink parameter pf_msix_max and pf_msix_min. It fits how ice hardware counts MSI-X. In case of ice amount of MSI-X reported on PCI is a whole MSI-X for the card (with MSI-X for VFs also). Having pf_msix_max allow user to statically set how many MSI-X he wants on PF and how many should be reserved for VFs. pf_msix_min is used to set minimum number of MSI-X with which ice driver should probe correctly. Meaning of this field in case of dynamic vs static allocation: - on system with dynamic MSI-X allocation support * alloc pf_msix_min as static, rest will be allocated dynamically - on system without dynamic MSI-X allocation support * try alloc pf_msix_max as static, minimum acceptable result is pf_msix_min As Jesse and Piotr suggested pf_msix_max and pf_msix_min can (an probably should) be stored in NVM. This patchset isn't implementing that. Dynamic (kernel or driver) way means that splitting MSI-X across the RDMA and eth in case there is a MSI-X shortage isn't correct. Can work when dynamic is only on driver site, but can't when dynamic is on kernel site. Let's remove this code and move to MSI-X allocation feature by feature. If there is no more MSI-X for a feature, a feature is working with less MSI-X or it is turned off. There is a regression here. With MSI-X splitting user can run RDMA and eth even on system with not enough MSI-X. Now only eth will work. RDMA can be turned on by changing number of PF queues (lowering) and reprobe RDMA driver. Example: 72 CPU number, eth, RDMA and flow director (1 MSI-X), 1 MSI-X for OICR on PF, and 1 more for RDMA. Card is using 1 + 72 + 1 + 72 + 1 = 147. We set pf_msix_min = 2, pf_msix_max = 128 OICR: 1 eth: 72 flow director: 1 RDMA: 128 - 74 = 54 We can change number of queues on pf to 36 and do devlink reinit OICR: 1 eth: 36 RDMA: 73 flow director: 1 We can also (implemented in "ice: enable_rdma devlink param") turned RDMA off. OICR: 1 eth: 72 RDMA: 0 (turned off) flow director: 1 After this changes we have a static base vector for SRIOV (SIOV probably in the feature). Last patch from this series is simplifying managing VF MSI-X code based on static vector. Now changing queues using ethtool is also changing MSI-X. If there is enough MSI-X it is always one to one. When there is not enough there will be more queues than MSI-X. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: init flow director before RDMA ice: simplify VF MSI-X managing ice: enable_rdma devlink param ice: treat dyn_allowed only as suggestion ice, irdma: move interrupts code to irdma ice: get rid of num_lan_msix field ice: remove splitting MSI-X between features ice: devlink PF MSI-X max and min parameter ice: count combined queues using Rx/Tx count ==================== Link: https://patch.msgid.link/20250205185512.895887-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: enable_rdma devlink param

2025-02-05T17:04:57Z

Implement enable_rdma devlink parameter to allow user to turn RDMA feature on and off. It is useful when there is no enough interrupts and user doesn't need RDMA feature. Reviewed-by: Jacob Keller Reviewed-by: Jan Sokolowski Reviewed-by: Przemek Kitszel Signed-off-by: Michal Swiatkowski Signed-off-by: Tony Nguyen

ice: devlink PF MSI-X max and min parameter

2025-02-05T17:02:44Z

Use generic devlink PF MSI-X parameter to allow user to change MSI-X range. Add notes about this parameters into ice devlink documentation. Tested-by: Pucha Himasekhar Reddy Signed-off-by: Michal Swiatkowski Signed-off-by: Tony Nguyen

ice: Add check for devm_kzalloc()

2025-02-02T00:57:50Z

Add check for the return value of devm_kzalloc() to guarantee the success of allocation. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Jiasheng Jiang Reviewed-by: Michal Swiatkowski Link: https://patch.msgid.link/20250131013832.24805-1-jiashengjiangcool@gmail.com Signed-off-by: Jakub Kicinski