kernel/drivers/net/ethernet/broadcom, branch linux-4.16.y

bnx2x: use the right constant

2018-06-11T20:48:14Z

[ Upstream commit dd612f18a49b63af8b3a5f572d999bdb197385bc ] Nearby code that also tests port suggests that the P0 constant should be used when port is zero. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e,e1; @@ * e ? e1 : e1 // Fixes: 6c3218c6f7e5 ("bnx2x: Adjust ETS to 578xx") Signed-off-by: Julia Lawall Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: fix clear flags in ethtool reset handling

2018-05-30T06:17:24Z

[ Upstream commit 2373d8d6a7932d28b8e31ea2a70bf6c002d97ac8 ] Clear flags when reset command processed successfully for components specified. Fixes: 6502ad5963a5 ("bnxt_en: Add ETH_RESET_AP support") Signed-off-by: Scott Branden Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: bgmac: Correctly annotate register space

2018-05-30T06:17:24Z

[ Upstream commit 16a1c0646e55c3345bce8e4edfc06ad119d27c04 ] All the members: base, idm_base and nicpm_base should be annotated with __iomem since they are pointers to register space. This fixes a bunch of sparse reported warnings. Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support") Fixes: dd5c5d037f5e ("net: ethernet: bgmac: add NS2 support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()

2018-05-30T06:17:24Z

[ Upstream commit 60d6e6f0b9e422dd01aeda39257ee0428e5e2a3f ] bgmac_dma_tx_ring_free() assigns the ctl1 word which is a litle endian 32-bit word without using proper accessors, fix this, and because a length cannot be negative, use unsigned int while at it. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bnxt_en: Ignore src port field in decap filter nodes

2018-05-30T06:17:20Z

[ Upstream commit 479ca3bf91da971fcefc003cf5773e8d7db24794 ] The driver currently uses src port field (along with other fields) in the decap tunnel key, while looking up and adding tunnel nodes. This leads to redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the flow engine. Fix this by ignoring the src port field in decap tunnel nodes. Fixes: f484f6782e01 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter") Signed-off-by: Sriharsha Basavapatna Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: systemport: Correclty disambiguate driver instances

2018-05-19T08:19:35Z

[ Upstream commit 1f3ccc3c3fc26468be00392ef0b2c215f9c9d054 ] While adding the DSA notifier, we will be sending DSA notifications with info->master that is going to point to a particular net_device instance. Our logic in bcm_sysport_map_queues() correctly disambiguates net_device instances that are not covered by our own driver, but it will not make sure that info->master points to a particular driver instance that we are interested in. In a system where e.g: two or more SYSTEMPORT instances are registered, this would lead in programming two or more times the queue mapping, completely messing with the logic which does the queue/port allocation and tracking. Fix this by looking at the notifier_block pointer which is unique per instance and allows us to go back to our driver private structure, and in turn to the backing net_device instance. Fixes: d156576362c0 ("net: systemport: Establish lower/upper queue mapping") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().

2018-05-19T08:19:33Z

[ Upstream commit d89a2adb8bfe6f8949ff389acdb9fa298b6e8e12 ] tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats under spinlock and can trigger BUG_ON() in vunmap() because vunmap() may sleep. Fix it by removing the spinlock and relying on the TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between tg3_get_stats64() and tg3_free_consistent(). TG3_FLAG_INIT_COMPLETE is always cleared under tp->lock before tg3_free_consistent() and therefore tg3_get_stats64() can safely access tp->hw_stats under tp->lock if TG3_FLAG_INIT_COMPLETE is set. Fixes: f5992b72ebe0 ("tg3: Fix race condition in tg3_get_stats64().") Reported-by: Zumeng Chen Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Fix memory fault in bnxt_ethtool_init()

2018-04-29T09:35:49Z

[ Upstream commit a60faa60da891e311e19fd3e88d611863f431130 ] In some firmware images, the length of BNX_DIR_TYPE_PKG_LOG nvram type could be greater than the fixed buffer length of 4096 bytes allocated by the driver. This was causing HWRM_NVM_READ to copy more data to the buffer than the allocated size, causing general protection fault. Fix the issue by allocating the exact buffer length returned by HWRM_NVM_FIND_DIR_ENTRY, instead of 4096. Move the kzalloc() call into the bnxt_get_pkgver() function. Fixes: 3ebf6f0a09a2 ("bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFO") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnx2x: fix spelling mistake: "registeration" -> "registration"

2018-03-21T22:09:03Z

Trivial fix to spelling mistake in BNX2X_ERR error message text Signed-off-by: Colin Ian King Acked-by: Sudarsana Kalluru Signed-off-by: David S. Miller

net: systemport: Rewrite __bcm_sysport_tx_reclaim()

2018-03-16T15:16:55Z

There is no need for complex checking between the last consumed index and current consumed index, a simple subtraction will do. This also eliminates the possibility of a permanent transmit queue stall under the following conditions: - one CPU bursts ring->size worth of traffic (up to 256 buffers), to the point where we run out of free descriptors, so we stop the transmit queue at the end of bcm_sysport_xmit() - because of our locking, we have the transmit process disable interrupts which means we can be blocking the TX reclamation process - when TX reclamation finally runs, we will be computing the difference between ring->c_index (last consumed index by SW) and what the HW reports through its register - this register is masked with (ring->size - 1) = 0xff, which will lead to stripping the upper bits of the index (register is 16-bits wide) - we will be computing last_tx_cn as 0, which means there is no work to be done, and we never wake-up the transmit queue, leaving it permanently disabled A practical example is e.g: ring->c_index aka last_c_index = 12, we pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12, so last_tx_cn == 0, nothing happens. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller