kernel/drivers/net/ethernet/broadcom/bgmac.c, branch linux-6.18.y

net: phy: fixed_phy: remove irq argument from fixed_phy_register

2025-05-21T01:17:43Z

All callers pass PHY_POLL, therefore remove irq argument from fixed_phy_register(). Note: I keep the irq argument in fixed_phy_add_gpiod() for now, for the case that somebody may want to use a GPIO interrupt in the future, by e.g. adding a call to fwnode_irq_get() to fixed_phy_get_gpiod(). Signed-off-by: Heiner Kallweit Reviewed-by: Simon Horman Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/31cdb232-a5e9-4997-a285-cb9a7d208124@gmail.com Signed-off-by: Jakub Kicinski

net: broadcom: use ethtool string helpers

2024-11-07T01:51:02Z

The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Cleans up the code quite well. Signed-off-by: Rosen Penev Tested-by: Florian Fainelli Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20241104205317.306140-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski

net: fill in MODULE_DESCRIPTION()s for Broadcom bgmac

2024-01-24T23:12:20Z

W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom iProc GBit driver. Signed-off-by: Breno Leitao Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20240123190332.677489-3-leitao@debian.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-08-24T17:51:39Z

Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski

net: bgmac: Return PTR_ERR() for fixed_phy_register()

2023-08-20T14:13:27Z

fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -ENODEV. The best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: bgmac: Fix return value check for fixed_phy_register()

2023-08-20T09:58:28Z

The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets") Signed-off-by: Ruan Jinjie Reviewed-by: Andrew Lunn Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller

net: bgmac: postpone turning IRQs off to avoid SoC hangs

2023-07-08T09:02:15Z

Turning IRQs off is done by accessing Ethernet controller registers. That can't be done until device's clock is enabled. It results in a SoC hang otherwise. This bug remained unnoticed for years as most bootloaders keep all Ethernet interfaces turned on. It seems to only affect a niche SoC family BCM47189. It has two Ethernet controllers but CFE bootloader uses only the first one. Fixes: 34322615cbaa ("net: bgmac: Mask interrupts during probe") Signed-off-by: Rafał Miłecki Reviewed-by: Michal Kubiak Signed-off-by: David S. Miller

bgmac: fix initial chip reset to support BCM5358

2023-02-28T10:10:05Z

While bringing hardware up we should perform a full reset including the switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what specification says and what reference driver does. This seems to be critical for the BCM5358. Without this hardware doesn't get initialized properly and doesn't seem to transmit or receive any packets. Originally bgmac was calling bgmac_chip_reset() before setting "has_robosw" property which resulted in expected behaviour. That has changed as a side effect of adding platform device support which regressed BCM5358 support. Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support") Cc: Jon Mason Signed-off-by: Rafał Miłecki Reviewed-by: Leon Romanovsky Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.com Signed-off-by: Paolo Abeni

net: bgmac: Drop free_netdev() from bgmac_enet_remove()

2022-11-12T03:48:35Z

netdev is allocated in bgmac_alloc() with devm_alloc_etherdev() and will be auto released in ->remove and ->probe failure path. Using free_netdev() in bgmac_enet_remove() leads to double free. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20221109150136.2991171-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14Z

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski