kernel/drivers/net/ethernet/broadcom/Kconfig, branch linux-4.3.y

bnx2x: Add vxlan RSS support

2015-08-18T21:21:10Z

Latest FW submission added some vxlan offload capabilities to our device. This patch adds the ability to connect to the vxlan NDOs and configure the UDP port associated with it in the HW. The device would now be capable of performing RSS according to the inner headers of the vxlan packets. Signed-off-by: Rajesh Borundia Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller

drivers/net: remove all references to obsolete Ethernet-HOWTO

2015-06-23T13:50:35Z

This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

bgmac: allow enabling on ARCH_BCM_5301X

2015-03-21T01:44:56Z

Home routers based on ARM SoCs like BCM4708 also have bcma bus with core supported by bgmac. Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller

bnx2-cnic: Driver Rebranding Changes

2015-02-20T20:46:49Z

This patch provides additional changes as a part of BNX2 and CNIC driver re-branding effort. Signed-off-by: Rasesh Mody Signed-off-by: David S. Miller

net: systemport: always select FIXED_PHY

2014-12-16T05:57:07Z

There is no need to do the following: select FIXED_PHY if SYSTEMPORT=y, as this implies that we will not be able to build and/or run the driver correctly when built as a module, which is no longer an issue since commit 37e9a6904520 ("net: phy: export fixed_phy_register()") Fixes: a3862db2d3c4 ("net: systemport: hook SYSTEMPORT driver in the build") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: bcmgenet: always select FIXED_PHY

2014-12-16T05:57:07Z

There is no need to do the following: select FIXED_PHY if BCMGENET=y, as this implies that we will not be able to build and/or run the driver correctly when built as a module, which is no longer an issue since commit 37e9a6904520 ("net: phy: export fixed_phy_register()") Fixes: b0ba512e225d ("net: bcmgenet: enable driver to work without device tree" Fixes: bdaa53bde55f ("net: bcmgenet: hook into the build system") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: bcmgenet: enable driver to work without a device tree

2014-12-09T01:26:59Z

Modify bcmgenet driver so that it can be used on Broadcom 7xxx MIPS-based STB platforms without a device tree. Signed-off-by: Petri Gynther Acked-by: Florian Fainelli Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-09-08T04:41:53Z

cnic : Cleanup CONFIG_IPV6 & VLAN check

2014-09-06T03:47:14Z

The cnic module needs to ensure that if ipv6 support is compiled as a module, then the cnic module cannot be compiled as built-in as it depends on ipv6. Made this check cleaner via Kconfig Use simpler IS_ENABLED for CONFIG_VLAN_8021Q check Signed-off-by: Anish Bhatt Acked-by: Michael Chan Signed-off-by: David S. Miller

net: bnx2x: fix build error with ptp

2014-08-26T00:37:10Z

bnx2x uses ptp functions, so it should select the provider of those functions (PTP_1588_CLOCK). Fixes these build errors: drivers/built-in.o: In function `__bnx2x_remove': /home/jim/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13409: undefined reference to `ptp_clock_unregister' drivers/built-in.o: In function `bnx2x_register_phc': /home/jim/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13202: undefined reference to `ptp_clock_register' drivers/built-in.o: In function `bnx2x_get_ts_info': /home/jim/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3498: undefined reference to `ptp_clock_index' Reported-by: Jim Davis Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller