kernel/drivers/net/dsa/mv88e6171.c, branch linux-4.3.y

net: dsa: mv88e6171: add hardware 802.1Q support

2015-09-07T02:50:50Z

The Marvell 88E6171 switch is in the 88E6351 family, which supports 802.1Q, thus add support from the generic mv88e6xxx functions. Signed-off-by: Vivien Didelot Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

dsa: mv88e6xxx: Allow speed/duplex of port to be configured

2015-08-31T21:48:01Z

The current code sets user ports to perform auto negotiation using the phy. CPU and DSA ports are configured to full duplex and maximum speed the switch supports. There are however use cases where the CPU has a slower port, and when user ports have SFP modules with fixed speed. In these cases, port settings to be read from a fixed_phy devices. The switch driver then needs to implement the adjust_link op, so the port settings can be set. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: change FDB routines prototypes

2015-08-11T19:03:19Z

Change the prototype of port_getnext to include a vid parameter. This is necessary to introduce the support for VLAN. Also rename the fdb_{add,del,getnext} function pointers to port_fdb_{add,del,getnext} since they are specific to a given port. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

Revert "Merge branch 'mv88e6xxx-switchdev-fdb'"

2015-08-11T19:00:37Z

This reverts commit f1d5ca434413b20cd3f8c18ff2b634b7782149a5, reversing changes made to 4933d85c5173832ebd261756522095837583c458. I applied v2 instead of v3. Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: rework FDB add/del operations

2015-08-10T05:48:09Z

Add a low level function for the ATU Load operation, and provide FDB add and delete wrappers functions. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: rework FDB getnext operation

2015-08-10T05:48:09Z

This commit adds a low level _mv88e6xxx_atu_getnext function and helpers to rewrite the mv88e6xxx_port_fdb_getnext operation. A mv88e6xxx_atu_entry structure is added for convenient access to the hardware, and GLOBAL_ATU_FID is defined instead of the raw 0x01 value. The previous implementation did not handle the eventual trunk mapping. If the related bit is set, then the ATU data register would contain the trunk ID, and not the port vector. Check this in the FDB getnext operation and do not handle it (yet). Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: add support for switchdev FDB objects

2015-08-10T05:48:09Z

Remove the fdb_{add,del,getnext} function pointer in favor of new port_fdb_{add,del,getnext}. Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: mv88e6171: Add other members of the family

2015-05-09T20:05:53Z

The 6171 is one member of the family 6171/6175/6350/6351. Add the other family members to the driver. Not tested on these new devices. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: Move mv88e6172 support into mv88e6352 family driver

2015-05-09T20:05:53Z

The mv88e6172 is part of the mv88e6352 family of devices. Move support for it out of the mv88e6171 driver into the mv88e6352, which results in some simplifications to the code. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: Converting remaining registers to mnemonics

2015-05-09T20:05:53Z

Use defines for registers, shifts and bits in the remaining register accesses in the individual drivers, in order to aid readability. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller