kernel/drivers/net/dsa/b53/Kconfig, branch linux-6.5.y

net: dsa: modularize DSA_TAG_PROTO_NONE

2022-11-23T04:41:45Z

There is no reason that I can see why the no-op tagging protocol should be registered manually, so make it a module and make all drivers which have any sort of reference to DSA_TAG_PROTO_NONE select it. Note that I don't know if ksz_get_tag_protocol() really needs this, or if it's just the logic which is poorly written. All switches seem to have their own tagging protocol, and DSA_TAG_PROTO_NONE is just a fallback that never gets used. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: dsa: b53: support legacy tags

2021-03-17T19:24:36Z

These tags are used on BCM5325, BCM5365 and BCM63xx switches. Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Fix build with B53_SRAB enabled and B53_SERDES=m

2018-09-28T17:33:42Z

When B53_SERDES is a loadable module, a built-in srab driver still cannot reach it, so the previous fix is incomplete: b53_srab.c:(.text+0x3f4): undefined reference to `b53_serdes_init' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe64): undefined reference to `b53_serdes_link_state' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe74): undefined reference to `b53_serdes_link_set' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe88): undefined reference to `b53_serdes_an_restart' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea0): undefined reference to `b53_serdes_phylink_validate' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea4): undefined reference to `b53_serdes_config' Add a Kconfig dependency that forces srab to also be a module in this case, but allow it to be built-in when serdes is disabled or built-in. Fixes: 7a8c7f5c30f9 ("net: dsa: b53: Fix build with B53_SRAB enabled and not B53_SERDES") Signed-off-by: Arnd Bergmann Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Add SerDes support

2018-09-06T14:48:34Z

Add support for the Northstar Plus SerDes which is accessed through a special page of the switch. Since this is something that most people probably will not want to use, make it a configurable option with a default on ARCH_BCM_NSP where it is the most useful currently. The SerDes supports both SGMII and 1000baseX modes for both lanes, and 2500baseX for one of the lanes, and is internally looking like a seemingly standard MII PHY, except for the few bits that got repurposed. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: b53: Provide sensible defaults

2018-09-02T05:28:19Z

The SRAB driver is the default way to communicate with the integrated switch on iProc platforms and the MMAP driver is the way to communicate with the integrated switch on DSL BCM63xx and CM BCM33xx. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Support prepended Broadcom tags

2017-11-13T01:34:54Z

On BCM58xx devices (Northstar Plus), there is an accelerator attached to port 8 which would only work if we use prepended Broadcom tags. Resolve that difference in our get_tag_protocol() function by setting the appropriate tagging protocol in that case. We need to change b53_brcm_hdr_setup() a little bit now since we can deal with two types of Broadcom tags. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: b53: Turn on Broadcom tags

2017-11-11T12:55:15Z

Enable Broadcom tags for b53 devices, except 5325 and 5365 which use a different Broadcom tag format not yet supported by net/dsa/tag_brcm.c. We also make sure that we can turn on Broadcom tags on a CPU port number that is capable of that: 5, 7 or 8. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: b53: Add support for Broadcom RoboSwitch

2016-06-10T05:21:29Z

This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller