kernel/drivers/net/can/usb/usb_8dev.c, branch linux-6.9.y

can: dev: fix skb drop check

2022-11-07T13:00:27Z

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde

can: tree-wide: advertise software timestamping capabilities

2022-07-28T09:44:01Z

Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr [mkl: mscan: add missing mscan_ethtool_ops] Signed-off-by: Marc Kleine-Budde

can: ubs_8dev: use KBUILD_MODNAME instead of hard coded names

2022-07-26T08:47:00Z

The driver uses the string "usb_8dev" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ubs_8dev". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220726082707.58758-9-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde

can: add CAN_ERR_CNT flag to notify availability of error counter

2022-07-20T07:27:37Z

Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: usb_8dev: do not report txerr and rxerr during bus-off

2022-07-20T07:26:50Z

During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: can-dev: remove obsolete CAN LED support

2022-05-19T20:15:51Z

Since commit 30f3b42147ba6f ("can: mark led trigger as broken") the CAN specific LED support was disabled and marked as BROKEN. As the common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work now the code can be removed as preparation for a CAN netdevice Kconfig rework. Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.net Suggested-by: Vincent Mailhol Signed-off-by: Oliver Hartkopp [mkl: remove led.h from MAINTAINERS] Signed-off-by: Marc Kleine-Budde

can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

2022-03-31T07:55:27Z

There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Hangyu Hua Signed-off-by: Marc Kleine-Budde

can: do not increase tx_bytes statistics for RTR frames

2022-01-05T11:09:05Z

The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::tx_bytes should not be increased when sending RTR frames. The function can_get_echo_skb() already returns the correct length, even for RTR frames (c.f. [1]). However, for historical reasons, the drivers do not use can_get_echo_skb()'s return value and instead, most of them store a temporary length (or dlc) in some local structure or array. Using the return value of can_get_echo_skb() solves the issue. After doing this, such length/dlc fields become unused and so this patch does the adequate cleaning when needed. This patch fixes all the CAN drivers. Finally, can_get_echo_skb() is decorated with the __must_check attribute in order to force future drivers to correctly use its return value (else the compiler would emit a warning). [1] commit ed3320cec279 ("can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames") Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: Yasushi SHOJI Cc: Oliver Hartkopp Cc: Stephane Grosjean Cc: Andreas Larsson Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 [mkl: add conversion for grcan] Signed-off-by: Marc Kleine-Budde

can: do not increase rx_bytes statistics for RTR frames

2022-01-05T11:09:05Z

can: do not increase rx statistics when generating a CAN rx error message frame

2022-01-05T11:09:05Z

The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the rx_packets and rx_bytes fields of struct net_device_stats because no actual payload were transmitted on the wire. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr CC: Marc Kleine-Budde CC: Nicolas Ferre CC: Alexandre Belloni CC: Ludovic Desroches CC: Chandrasekar Ramakrishnan CC: Maxime Ripard CC: Chen-Yu Tsai CC: Jernej Skrabec CC: Appana Durga Kedareswara rao CC: Naga Sureshkumar Relli CC: Michal Simek CC: Stephane Grosjean Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 Signed-off-by: Marc Kleine-Budde