kernel/drivers/net/bonding, branch linux-5.1.y

bonding: validate ip header before check IPPROTO_IGMP

2019-07-26T07:12:49Z

[ Upstream commit 9d1bc24b52fb8c5d859f9a47084bf1179470e04c ] bond_xmit_roundrobin() checks for IGMP packets but it parses the IP header even before checking skb->protocol. We should validate the IP header with pskb_may_pull() before using iph->protocol. Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode") Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bonding: Always enable vlan tx offload

2019-07-03T11:13:40Z

[ Upstream commit 30d8177e8ac776d89d387fad547af6a0f599210e ] We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko Signed-off-by: YueHaibing Acked-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bonding/802.3ad: fix slave link initialization transition states

2019-06-04T05:59:39Z

[ Upstream commit 334031219a84b9994594015aab85ed7754c80176 ] Once in a while, with just the right timing, 802.3ad slaves will fail to properly initialize, winding up in a weird state, with a partner system mac address of 00:00:00:00:00:00. This started happening after a fix to properly track link_failure_count tracking, where an 802.3ad slave that reported itself as link up in the miimon code, but wasn't able to get a valid speed/duplex, started getting set to BOND_LINK_FAIL instead of BOND_LINK_DOWN. That was the proper thing to do for the general "my link went down" case, but has created a link initialization race that can put the interface in this odd state. The simple fix is to instead set the slave link to BOND_LINK_DOWN again, if the link has never been up (last_link_up == 0), so the link state doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed in this case, it simply hasn't been up yet, and this prevents the unnecessary state change from DOWN to FAIL and getting stuck in an init failure w/o a partner mac. Fixes: ea53abfab960 ("bonding/802.3ad: fix link_failure_count tracking") CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: "David S. Miller" CC: netdev@vger.kernel.org Tested-by: Heesoon Kim Signed-off-by: Jarod Wilson Acked-by: Jay Vosburgh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bonding: fix arp_validate toggling in active-backup mode

2019-05-16T17:35:35Z

[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ] There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so: modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down echo "ens4f0" > /sys/class/net/bond0/bonding/slaves echo "ens4f1" > /sys/class/net/bond0/bonding/slaves ip link set bond0 up ip addr add 192.168.1.2/24 dev bond0 Pings to 192.168.1.1 work just fine. Now turn on arp_validate: echo 1 > /sys/class/net/bond0/bonding/arp_validate Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face: echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg ... [133191.911987] bond0: Setting arp_validate to none (0) [133194.257793] bond0: bond_should_notify_peers: slave ens4f0 [133194.258031] bond0: link status definitely down for interface ens4f0, disabling it [133194.259000] bond0: making interface ens4f1 the new active one [133197.330130] bond0: link status definitely down for interface ens4f1, disabling it [133197.331191] bond0: now running without any active interface! The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df97c7f, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well. One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here. Fixes: 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor") CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: "David S. Miller" CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bonding: fix event handling for stacked bonds

2019-04-15T20:22:09Z

When a bond is enslaved to another bond, bond_netdev_event() only handles the event as if the bond is a master, and skips treating the bond as a slave. This leads to a refcount leak on the slave, since we don't remove the adjacency to its master and the master holds a reference on the slave. Reproducer: ip link add bondL type bond ip link add bondU type bond ip link set bondL master bondU ip link del bondL No "Fixes:" tag, this code is older than git history. Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller

bonding: show full hw address in sysfs for slave entries

2019-03-29T20:32:39Z

Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example. # cat /sys/devices//net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1 # cat /sys/devices//net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80 So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well. Signed-off-by: Konstantin Khorenko Signed-off-by: David S. Miller

net: Remove switchdev.h inclusion from team/bond/vlan

2019-02-25T01:40:46Z

This is no longer necessary after eca59f691566 ("net: Remove support for bridge bypass ndos from stacked devices") Suggested-by: Ido Schimmel Signed-off-by: Florian Fainelli Reviewed-by: Andy Gospodarek Acked-by: Jiri Pirko Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-02-24T20:06:19Z

Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller

bonding: fix PACKET_ORIGDEV regression

2019-02-21T21:20:08Z

This patch fixes a subtle PACKET_ORIGDEV regression which was a side effect of fixes introduced by: 6a9e461f6fe4 bonding: pass link-local packets to bonding master also. ... to: b89f04c61efe bonding: deliver link-local packets with skb->dev set to link that packets arrived on While 6a9e461f6fe4 restored pre-b89f04c61efe presence of link-local packets on bonding masters (which is required e.g. by linux bridges participating in spanning tree or needed for lab-like setups created with group_fwd_mask) it also caused the originating device information to be lost due to cloning. Maciej Żenczykowski proposed another solution that doesn't require packet cloning and retains original device information - instead of returning RX_HANDLER_PASS for all link-local packets it's now limited only to packets from inactive slaves. At the same time, packets passed to bonding masters retain correct information about the originating device and PACKET_ORIGDEV can be used to determine it. This elegantly solves all issues so far: - link-local packets that were removed from bonding masters - LLDP daemons being forced to explicitly bind to slave interfaces - PACKET_ORIGDEV having no effect on bond interfaces Fixes: 6a9e461f6fe4 (bonding: pass link-local packets to bonding master also.) Reported-by: Vincent Bernat Signed-off-by: Michal Soltys Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller

bonding: check slave set command firstly

2019-02-14T16:35:50Z

This patch is a little improvement. If user use the command shown as below, we should print the info [1] instead of [2]. The eth0 exists actually, and it may confuse user. $ echo "eth0" > /sys/class/net/bond4/bonding/slaves [1] "bond4: no command found in slaves file - use +ifname or -ifname" [2] "write error: No such device" Signed-off-by: Tonghao Zhang Signed-off-by: David S. Miller