kernel/drivers/mmc, branch linux-rolling-stable

mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support

2026-03-19T15:15:10Z

commit 6465a8bbb0f6ad98aeb66dc9ea19c32c193a610b upstream. RK3576 is the first platform to introduce internal phase support, and subsequent platforms are expected to adopt a similar design. In this architecture, runtime suspend powers off the attached power domain, which resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0, SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and restored, a requirement that falls outside the scope of the dw_mmc core. Fixes: 59903441f5e4 ("mmc: dw_mmc-rockchip: Add internal phase support") Signed-off-by: Shawn Lin Tested-by: Marco Schirrmeister Reviewed-by: Heiko Stuebner Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-brcmstb: use correct register offset for V1 pin_sel restore

2026-03-19T15:15:09Z

commit 79ad471530e0baef0dce991816013df55e401d9c upstream. The restore path for SDIO_CFG_CORE_V1 was incorrectly using SDIO_CFG_SD_PIN_SEL (offset 0x44) instead of SDIO_CFG_V1_SD_PIN_SEL (offset 0x54), causing the wrong register to be written on resume. The save path already uses the correct V1-specific offset. This affects BCM7445 and BCM72116 platforms which use the V1 config core. Fixes: b7e614802e3f ("mmc: sdhci-brcmstb: save and restore registers during PM") Signed-off-by: Kamal Dasu Cc: stable@vger.kernel.org Tested-by: Florian Fainelli Reviewed-by: Florian Fainelli Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mmci: Fix device_node reference leak in of_get_dml_pipe_index()

2026-03-19T15:15:09Z

commit af12e64ae0661546e8b4f5d30d55c5f53a11efe7 upstream. When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In of_get_dml_pipe_index(), it does not release the reference. Fixes: 9cb15142d0e3 ("mmc: mmci: Add qcom dml support to the driver.") Signed-off-by: Felix Gu Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Revert "mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms"

2026-03-04T12:19:22Z

[ Upstream commit ff112f1ecd10b72004eac05bae395e1c65f0c63c ] This reverts commit aced969e9bf3701dc75cfca57c78c031b7875b9d. It was determined that this was not the correct "fix", so should be reverted. Fixes: aced969e9bf3 ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms") Cc: Matthew Schwartz Cc: Ulf Hansson Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms

2026-03-04T12:19:22Z

[ Upstream commit aced969e9bf3701dc75cfca57c78c031b7875b9d ] The existing 1ms delay in sd_power_on is insufficient and causes resume errors around 4% of the time. Increasing the delay to 5ms resolves this issue after testing 300 s2idle cycles. Fixes: 1f311c94aabd ("mmc: rtsx: add 74 Clocks in power on flow") Signed-off-by: Matthew Schwartz Link: https://patch.msgid.link/20260105060236.400366-3-matthew.schwartz@linux.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

Revert "mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms"

2026-02-26T23:01:25Z

mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms

2026-02-26T23:01:24Z

mmc: sdhci-of-dwcmshc: Fix DMA 128MB boundary for Eswin EIC7700

2026-01-22T12:26:08Z

This DWC MSHC has a 128MB limitation where the data buffer size and start address must not exceed the 128MB boundary. Registering the missing 'adma_write_desc' callback function. Signed-off-by: Huan He Acked-by: Adrian Hunter Fixes: 32b2633219d3 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700") Signed-off-by: Ulf Hansson

mmc: sdhci-of-dwcmshc: Fix init for AXI clock for Eswin EIC7700

2026-01-22T12:23:41Z

Accessing the High-Speed registers requires the AXI clock to be enabled. Signed-off-by: Huan He Acked-by: Adrian Hunter Fixes: 32b2633219d3 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700") Signed-off-by: Ulf Hansson

mmc: rtsx_pci_sdmmc: implement sdmmc_card_busy function

2026-01-20T10:58:32Z

rtsx_pci_sdmmc does not have an sdmmc_card_busy function, so any voltage switches cause a kernel warning, "mmc0: cannot verify signal voltage switch." Copy the sdmmc_card_busy function from rtsx_pci_usb to rtsx_pci_sdmmc to fix this. Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver") Signed-off-by: Matthew Schwartz Tested-by: Ricky WU Reviewed-by: Ricky WU Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson