kernel/drivers/mmc/host/omap.c, branch linux-6.9.y

Merge tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2024-04-09T14:17:37Z

GPIO regression fixes for n8x0 A series of fixes for n8x0 GPIO regressions caused by the changes to use GPIO descriptors. * tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: fix USB regression on Nokia N8x0 mmc: omap: restore original power up/down steps mmc: omap: fix deferred probe mmc: omap: fix broken slot switch lookup ARM: OMAP2+: fix N810 MMC gpiod table ARM: OMAP2+: fix bogus MMC GPIO labels on Nokia N8x0 Link: https://lore.kernel.org/r/pull-1712135932-125424@atomide.com Signed-off-by: Arnd Bergmann

mmc: omap: restore original power up/down steps

2024-03-08T08:50:02Z

Commit e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") moved Nokia N810 MMC power up/down from the board file into the MMC driver. The change removed some delays, and ordering without a valid reason. Restore power up/down to match the original code. This matters only on N810 where the 2nd GPIO is in use. Other boards will see an additional delay but that should be a lesser concern than omitting delays altogether. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen Message-ID: <20240223181439.1099750-6-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren

mmc: omap: fix deferred probe

2024-03-08T08:50:02Z

After a deferred probe, GPIO descriptor lookup will fail with EBUSY. Fix by using managed descriptors. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen Message-ID: <20240223181439.1099750-5-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren

mmc: omap: fix broken slot switch lookup

2024-03-08T08:50:02Z

The lookup is done before host->dev is initialized. It will always just fail silently, and the MMC behaviour is totally unpredictable as the switch is left in an undefined state. Fix that. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen Message-ID: <20240223181439.1099750-4-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren

mmc: omap: Use sg_miter for PIO

2024-02-13T12:40:56Z

Use the scatterlist memory iterator instead of just dereferencing virtual memory using sg_virt(). This make highmem references work properly. Suggested-by: Christoph Hellwig Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/ Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-7-d8e732aa97d1@linaro.org Signed-off-by: Ulf Hansson

mmc: omap: Convert to platform remove callback returning void

2023-08-15T10:45:04Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Cc: Uwe Kleine-König Signed-off-by: Yangtao Li Link: https://lore.kernel.org/r/20230727070051.17778-13-frank.li@vivo.com Signed-off-by: Ulf Hansson

Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2023-06-29T17:11:10Z

Pull gpio updates from Bartosz Golaszewski: "We have two new drivers, some improvements to the core code, lots of different updates to existing GPIO drivers and some dt-bindings on top. There's nothing controversial in here and almost everything has been in next for more than a week (95% a lot longer than this). The only thing that has spent less time in next is a new driver so no risk of regressions. The single merge pulls in changes that remove all usage of global GPIO numbers from arch/arm/mach-omap. Core GPIO library: - remove unused symbols - don't spam the kernel log with messages about hogs - remove old sysfs API cruft - improve handling of GPIO masks New drivers: - add a driver for the BlueField-3 GPIO controller - add GPIO support for the TPS65219 PMIC Driver improvements: - extend the gpio-aggregator driver to support ramp-up/ramp-down delay - remove unnecessary CONFIG_OF guards from gpio-aggregator - readability improvements in gpio-tangier - switch i2c drivers back to using probe() now that it's been converted in the i2c subsystem to not taking the id parameter - remove unused inclusions of of_gpio.h in several drivers - make pm ops static in gpio-davinci and fix a comment - use more devres in drivers to shrink and simplify the code - add missing include in gpio-sa1100 - add HAS_IOPORT KConfig dependency where needed - add permissions checks before accessing pins in gpio-tegra186 - convert the gpio-zynq driver to using immutable irqchips - preserve output settings set by the bootloader in gpio-mpc8xxx Selftests: - tweak the variable naming in script tests Device tree updates: - convert gpio-mmio and gpio-stmpe to YAML - add parsing of GPIO hogs to gpio-vf610 - add bindings for the Cirrus EP93xx GPIO controller - add gpio-line-names property to the gpio-pca9570 bindings - extend the binding for x-powers,axp209 with another block" * tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits) of: unittest: drop assertions for GPIO hog messages gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres dt-bindings: gpio: gpio-vf610: Add parsing of hogs gpio: lpc18xx: Remove unused of_gpio.h inclusion gpio: xra1403: Remove unused of_gpio.h inclusion gpio: mpc8xxx: Remove unused of_gpio.h inclusion dt-bindings: gpio: Add Cirrus EP93xx gpio: mpc8xxx: latch GPIOs state on module load when configured as output selftests: gpio: gpio-sim: Use same variable name for sysfs pathname gpio: mlxbf3: Add gpio driver support gpio: delay: Remove duplicative functionality gpio: aggregator: Set up a parser of delay line parameters gpio: aggregator: Support delay for setting up individual GPIOs gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections dt-bindings: gpio: pca9570: add gpio-line-names property gpiolib: remove unused gpio_cansleep() gpio: tps65219: add GPIO support for TPS65219 PMIC gpio: zynq: fix zynqmp_gpio not an immutable chip warning gpio: davinci: make davinci_gpio_dev_pm_ops static ...

mmc: omap: fix deferred probing

2023-06-19T11:31:12Z

The driver overrides the error codes returned by platform_get_irq() to -ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the error codes upstream. Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/20230617203622.6812-6-s.shtylyov@omp.ru Signed-off-by: Ulf Hansson

ARM/mmc: Convert old mmci-omap to GPIO descriptors

2023-05-24T13:01:36Z

A recent change to the OMAP driver making it use a dynamic GPIO base created problems with some old OMAP1 board files, among them Nokia 770, SX1 and also the OMAP2 Nokia n8x0. Fix up all instances of GPIOs being used for the MMC driver by pushing the handling of power, slot selection and MMC "cover" into the driver as optional GPIOs. This is maybe not the most perfect solution as the MMC framework have some central handlers for some of the stuff, but it at least makes the situtation better and solves the immediate issue. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Acked-by: Ulf Hansson Signed-off-by: Linus Walleij

mmc: omap: Use devm_platform_get_and_ioremap_resource()

2023-03-23T10:55:13Z

According to commit 890cc39a8799 ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yang Li Link: https://lore.kernel.org/r/20230315053434.38316-1-yang.lee@linux.alibaba.com Signed-off-by: Ulf Hansson