kernel/drivers/mmc/host/alcor.c, branch linux-6.9.y

mmc: alcor: Convert to platform remove callback returning void

2023-08-15T10:45:06Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Cc: Uwe Kleine-König Signed-off-by: Yangtao Li Link: https://lore.kernel.org/r/20230727070051.17778-40-frank.li@vivo.com Signed-off-by: Ulf Hansson

mmc: alcor: fix return value check of mmc_add_host()

2022-12-07T12:22:34Z

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path. Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221101063023.1664968-2-yangyingliang@huawei.com Signed-off-by: Ulf Hansson

mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v5.4

2020-09-07T12:24:21Z

This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v5.4 timeframe. Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20200903162412.5.I2b630c4d40ff4ea61d5b30b8ccfe95890e257100@changeid Signed-off-by: Ulf Hansson

mmc: alcor: Fix a resource leak in the error path for ->probe()

2020-05-07T13:10:25Z

If devm_request_threaded_irq() fails, the allocated struct mmc_host needs to be freed via calling mmc_free_host(), so let's do that. Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/20200426202355.43055-1-christophe.jaillet@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson

mmc: alcor: remove a redundant greater or equal to zero comparison

2019-07-10T11:17:30Z

A greater or equal comparison on the unsigned int variable tmp_diff is always true as unsigned ints are never negative. Hence the comparison is redundant and can be removed. Addresses-Coverity: ("Unsigned compared against 0") Signed-off-by: Colin Ian King Signed-off-by: Ulf Hansson

Merge tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2019-05-07T19:56:19Z

Pull MMC updates from Ulf Hansson: "MMC core: - Fix a few memoryleaks - Minor improvements to the card initialization sequence - Partially support sleepy GPIO controllers for pwrseq eMMC MMC host: - alcor: Work with multiple-entry sglists - alcor: Enable DMA for writes - meson-gx: Improve tuning support - meson-gx: Avoid clock glitch when switching to DDR modes - meson-gx: Disable unreliable HS400 mode - mmci: Minor updates for support of HW busy detection - mmci: Support data transfers for the stm32_sdmmc variant - mmci: Restructure code to better support different variants - mtk-sd: Add support for version found on MT7620 family SOCs - mtk-sd: Add support for the MT8516 version - mtk-sd: Add Chaotian Jing as the maintainer - sdhci: Reorganize request-code to convert from tasklet to workqueue - sdhci_am654: Stabilize support for lower speed modes - sdhci-esdhc-imx: Add HS400 support for iMX7ULP - sdhci-esdhc-imx: Add support for iMX7ULP version - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE - sdhci-of-esdhc: Add support for the ls1028a version - sdhci-of-esdhc: Several fixups for errata - sdhci-pci: Fix BYT OCP setting - sdhci-pci: Add support for Intel CML - sdhci-tegra: Add support for system suspend/resume - sdhci-tegra: Add CQE support for Tegra186 WAR - sdhci-tegra: Add support for Tegra194 - sdhci-tegra: Update HW tuning process MEMSTICK: - I volunteered to help as a maintainer for the memstick subsystem, which is reflected by an update to the MAINTAINERS file. Changes are funneled through my MMC git and we will use the linux-mmc mailing list. MEMSTICK host: - A few minor cleanups" * tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits) mmc: sdhci-pci: Fix BYT OCP setting dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host mmc: mtk-sd: select REGULATOR mmc: mtk-sd: enable internal card-detect logic. mmc: mtk-sd: add support for config found in mt7620 family SOCs. mmc: mtk-sd: don't hard-code interrupt trigger type mmc: core: Fix tag set memory leak dt-bindings: mmc: Add support for MT8516 to mtk-sd mmc: mmci: Prevent polling for busy detection in IRQ context mmc: mmci: Cleanup mmci_cmd_irq() for busy detect mmc: usdhi6rol0: mark expected switch fall-throughs mmc: core: Verify SD bus width mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string mmc: meson-gx: add signal resampling tuning mmc: meson-gx: remove Rx phase tuning mmc: meson-gx: avoid clock glitch when switching to DDR modes mmc: meson-gx: disable HS400 ...

Merge tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2019-05-06T23:57:52Z

Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...

mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host

2019-05-06T10:33:03Z

The driver for Alcor Micro AU6601 and AU6621 controllers uses a pointer to get from the private alcor_sdmmc_host structure to the generic mmc_host structure. However the latter is always immediately preceding the former in memory, so compute its address with a subtraction (which is cheaper than a dereference) and drop the superfluous pointer. No functional change intended. Signed-off-by: Kamlesh Gurudasani Signed-off-by: Ulf Hansson

mmc: alcor: work with multiple-entry sglists

2019-05-06T09:55:39Z

DMA on this hardware is limited to dealing with a 4096 bytes at a time. Previously, the driver was set up accordingly to request single-page DMA buffers, however that had the effect of generating a large number of small MMC requests for data I/O. Improve the driver to accept multi-entry scatter-gather lists. The size of each entry is already capped to 4096 bytes (AU6601_MAX_DMA_BLOCK_SIZE), matching the hardware requirements. Existing driver code already iterates through remaining sglist entries after each DMA transfer is complete. Also add some comments to help clarify the situation, and clear up some of the confusion I had regarding DMA vs PIO. Testing with dd, this increases write performance from 2mb/sec to 10mb/sec, and increases read performance from 4mb/sec to 14mb/sec. Signed-off-by: Daniel Drake Link: http://lkml.kernel.org/r/CAD8Lp47JYdZzbV9F+asNwvSfLF_po_J7ir6R_Vb-Dab21_=Krw@mail.gmail.com Signed-off-by: Ulf Hansson

Revert "mmc: alcor: enable DMA transfer of large buffers"

2019-05-06T09:55:39Z

This reverts commit 57ebb96c293da9f0ec56aba13c5541269a5c10b1. Usage of the DMA page iterator was problematic here because we were not considering offset & length of entries in the scatterlist. Also, after further discussion, the suggested revised approach is much more similar to the driver implementation before this commit was applied, so revert it. Signed-off-by: Daniel Drake Signed-off-by: Ulf Hansson