kernel/drivers/mmc/core/sd.c, branch linux-6.9.y

mmc: core: constify the struct device_type usage

2024-02-27T12:48:36Z

Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the sdio_type, sd_type and mmc_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Link: https://lore.kernel.org/r/20240219-device_cleanup-mmc-v1-1-1910e283cf5a@marliere.net Signed-off-by: Ulf Hansson

mmc: core: Add host specific tuning support for SD HS mode

2023-08-25T09:45:51Z

To support the need for host specific tuning for SD high-speed mode, let's add two new optional callbacks, ->prepare|execute_sd_hs_tuning() and let's call them when switching into the SD high-speed mode. Note that, during the tuning process it's also needed for host drivers to send commands to the SD card to verify that the tuning process succeeds. Therefore, let's also share the corresponding functions from the core to allow this. Signed-off-by: Wenchao Chen Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com [Ulf: Dropped unnecessary function declarations and updated the commit msg] Signed-off-by: Ulf Hansson

mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019

2023-06-20T11:19:34Z

This microSD card never clears Flush Cache bit after cache flush has been started in sd_flush_cache(). This leads e.g. to failure to mount file system. Add a quirk which disables the SD cache for this specific card from specific manufacturing date of 11/2019, since on newer dated cards from 05/2023 the cache flush works correctly. Fixes: 08ebf903af57 ("mmc: core: Fixup support for writeback-cache for eMMC and SD") Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20230620102713.7701-1-marex@denx.de Signed-off-by: Ulf Hansson

mmc: core: Normalize the error handling branch in sd_read_ext_regs()

2022-12-07T12:29:14Z

Let's use pr_err() to output the error messages and let's extend a comment to clarify why returning 0 (success) in one case make sense. Fixes: c784f92769ae ("mmc: core: Read the SD function extension registers for power management") Signed-off-by: Zhen Lei [Ulf: Clarified the comment and the commit-msg] Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com Signed-off-by: Ulf Hansson

mmc: core: Terminate infinite loop in SD-UHS voltage switch

2022-09-21T12:36:08Z

This loop intends to retry a max of 10 times, with some implicit termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the termination condition depends on the value reported by the SD card (*rocr), which may or may not correctly reflect what we asked it to do. Needless to say, it's not wise to rely on the card doing what we expect; we should at least terminate the loop regardless. So, check both the input and output values, so we ensure we will terminate regardless of the SD card behavior. Note that SDIO learned a similar retry loop in commit 0797e5f1453b ("mmc: core: Fixup signal voltage switch"), but that used the 'ocr' result, and so the current pre-terminating condition looks like: rocr & ocr & R4_18V_PRESENT (i.e., it doesn't have the same bug.) This addresses a number of crash reports seen on ChromeOS that look like the following: ... // lots of repeated: ... <4>[13142.846061] mmc1: Skipping voltage switch <4>[13143.406087] mmc1: Skipping voltage switch <4>[13143.964724] mmc1: Skipping voltage switch <4>[13144.526089] mmc1: Skipping voltage switch <4>[13145.086088] mmc1: Skipping voltage switch <4>[13145.645941] mmc1: Skipping voltage switch <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds. ... Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Cc: Signed-off-by: Brian Norris Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org Signed-off-by: Ulf Hansson

mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure

2022-08-22T10:58:28Z

If re-initialization results is a different signal voltage, because the voltage switch failed previously, but not this time (or vice versa), then sd3_bus_mode will be inconsistent with the card because the SD_SWITCH command is done only upon first initialization. Fix by always reading SD_SWITCH information during re-initialization, which also means it does not need to be re-read later for the 1.8V fixup workaround. Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added about 1% to 1.5% to the re-initialization time, so it's not particularly significant. Reported-by: Seunghui Lee Signed-off-by: Adrian Hunter Reviewed-by: Seunghui Lee Tested-by: Seunghui Lee Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson

mmc: core: Fix UHS-I SD 1.8V workaround branch

2022-08-22T10:58:28Z

When introduced, upon success, the 1.8V fixup workaround in mmc_sd_init_card() would branch to practically the end of the function, to a label named "done". Unfortunately, perhaps due to the label name, over time new code has been added that really should have come after "done" not before it. Let's fix the problem by moving the label to the correct place and rename it "cont". Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card") Signed-off-by: Adrian Hunter Reviewed-by: Seunghui Lee Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson

mmc: core: Use mmc_card_* macro and add a new for the sd_combo type

2022-07-13T10:44:41Z

Add mmc_card_sd_combo() macro for sd combo type card and use the mmc_card_* macro to simplify code instead of comparing card->type. Signed-off-by: Seunghui Lee Link: https://lore.kernel.org/r/20220713033635.28432-2-sh043.lee@samsung.com Signed-off-by: Ulf Hansson

mmc: core: Replace with already defined values for readability

2022-07-12T10:38:49Z

SD_ROCR_S18A is already defined and is used to check the rocr value, so let's replace with already defined values for readability. Signed-off-by: ChanWoo Lee Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson

mmc: core: Add CIDs for cards to the entropy pool

2022-04-26T13:39:37Z

To make the entropy pool a bit better we can toss in the CID for eMMC and SD cards into it, usually the serial number portion is at least unique. This does not count as improvement of the entropy but in practice it makes it a bit more random to mix in these numbers. Cc: Theodore Ts'o Acked-by: Jason A. Donenfeld Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20220425205442.1347837-1-linus.walleij@linaro.org Signed-off-by: Ulf Hansson