kernel/drivers/mmc/core/queue.c, branch linux-6.9.y

Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2024-03-13T17:59:28Z

Pull MMC updates from Ulf Hansson: "MMC core: - Drop the use of BLK_BOUNCE_HIGH - Fix partition switch for GP3 - Remove usage of the deprecated ida_simple API MMC host: - cqhci: Update bouncing email-addresses in MAINTAINERS - davinci_mmc: Use sg_miter for PIO - dw_mmc-hi3798cv200: Convert the DT bindings to YAML - dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant - fsl-imx-esdhc: A couple of corrections/updates to the DT bindings - meson-mx-sdhc: Drop use of the ->card_hw_reset() callback - moxart-mmc: Use sg_miter for PIO - moxart-mmc: Fix accounting for DMA transfers - mvsdio: Use sg_miter for PIO - mxcmmc: Use sg_miter for PIO - omap: Use sg_miter for PIO - renesas,sdhi: Add support for R-Car V4M variant - sdhci-esdhc-mcf: Use sg_miter for swapping - sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants - sh_mmcif: Use sg_miter for PIO - tmio: Avoid concurrent runs of mmc_request_done()" * tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits) mmc: core: make mmc_host_class constant mmc: core: Fix switch on gp3 partition mmc: tmio: comment the ERR_PTR usage in this driver mmc: mmc_spi: Don't mention DMA direction mmc: dw_mmc: Remove unused of_gpio.h mmc: dw_mmc: add support for hi3798mv200 dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS() mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase() mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function mmc: tmio: avoid concurrent runs of mmc_request_done() dt-bindings: mmc: fsl-imx-mmc: Document the required clocks mmc: sh_mmcif: Advance sg_miter before reading blocks mmc: sh_mmcif: sg_miter must not be atomic mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state mmc: core: constify the struct device_type usage mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support ...

mmc: pass queue_limits to blk_mq_alloc_disk

2024-02-20T00:00:29Z

Pass the queue limit set at initialization time directly to blk_mq_alloc_disk instead of updating it right after the allocation. This requires refactoring the code a bit so that what was mmc_setup_queue before also allocates the gendisk now and actually sets all limits. Signed-off-by: Christoph Hellwig Acked-by: Ulf Hansson Link: https://lore.kernel.org/r/20240215070300.2200308-18-hch@lst.de Signed-off-by: Jens Axboe

block: pass a queue_limits argument to blk_mq_alloc_disk

2024-02-13T15:56:59Z

Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Signed-off-by: Christoph Hellwig Reviewed-by: Keith Busch Reviewed-by: John Garry Reviewed-by: Chaitanya Kulkarni Reviewed-by: Ming Lei Reviewed-by: Damien Le Moal Reviewed-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de Signed-off-by: Jens Axboe

mmc: core Drop BLK_BOUNCE_HIGH

2024-02-13T12:37:28Z

The MMC core sets BLK_BOUNCE_HIGH for devices where dma_mask is unassigned. For the majority of MMC hosts this path is never taken: the OF core will unconditionally assign a 32-bit mask to any OF device, and most MMC hosts are probed from device tree, see drivers/of/platform.c: of_platform_device_create_pdata() dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (!dev->dev.dma_mask) dev->dev.dma_mask = &dev->dev.coherent_dma_mask; of_amba_device_create() dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->dev.dma_mask = &dev->dev.coherent_dma_mask; MMC devices that are probed from ACPI or PCI will likewise have a proper dma_mask assigned. The only remaining devices that could have a blank dma_mask are platform devices instantiated from board files. These are mostly used on systems without CONFIG_HIGHMEM enabled which means the block layer will not bounce, and in the few cases where it is enabled it is not used anyway: for example some OMAP2 systems such as Nokia n800/n810 will create a platform_device and not assign a dma_mask, however they do not have any highmem, so no bouncing will happen anyway: the block core checks if max_low_pfn >= max_pfn and this will always be false. Should it turn out there is a platform_device with blank DMA mask actually using CONFIG_HIGHMEM somewhere out there we should set dma_mask for it, not do this trickery. Signed-off-by: Linus Walleij Acked-by: Arnd Bergmann Acked-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240125-mmc-no-blk-bounce-high-v1-1-d0f92a30e085@linaro.org Signed-off-by: Ulf Hansson

mmc: core: Allow dynamical updates of the number of requests for hsq

2023-09-27T10:13:18Z

To allow dynamical updates of the current number of used in-flight requests, let's move away from using a hard-coded value to a use a corresponding variable in the struct mmc_host. This can be valuable when optimizing for certain I/O request sequences, as shown by subsequent changes. Signed-off-by: Wenchao Chen Link: https://lore.kernel.org/r/20230919074707.25517-2-wenchao.chen@unisoc.com [Ulf: Re-wrote the commitmsg to clarify the change] Signed-off-by: Ulf Hansson

mmc: core: Fix WRITE_ZEROES CQE handling

2022-10-24T17:14:17Z

WRITE_ZEROES requests use TRIM, so mark them as needing to be issued synchronously even when a CQE is being used. Without this, mmc_blk_mq_issue_rq() triggers a WARN_ON_ONCE() and fails the request since we don't have any handling for issuing this asynchronously. Fixes: f7b6fc327327 ("mmc: core: Support zeroout using TRIM for eMMC") Reported-by: Jon Hunter Tested-by: Jon Hunter Signed-off-by: Vincent Whitchurch Reviewed-by: Avri Altman Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221020130123.4033218-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson

mmc: queue: Cancel recovery work on cleanup

2022-10-17T09:51:33Z

To prevent any recovery work running after the queue cleanup cancel it. Any recovery running post-cleanup dereferenced mq->card as NULL and was not meaningful to begin with. Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/c865c0c9789d428494b67b820a78923e@hyperstone.com Signed-off-by: Ulf Hansson

blk-mq: Drop blk_mq_ops.timeout 'reserved' arg

2022-07-06T12:33:53Z

With new API blk_mq_is_reserved_rq() we can tell if a request is from the reserved pool, so stop passing 'reserved' arg. There is actually only a single user of that arg for all the callback implementations, which can use blk_mq_is_reserved_rq() instead. This will also allow us to stop passing the same 'reserved' around the blk-mq iter functions next. Signed-off-by: John Garry Reviewed-by: Christoph Hellwig Reviewed-by: Bart Van Assche Reviewed-by: Hannes Reinecke Acked-by: Ulf Hansson # For MMC Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe

block: simplify disk shutdown

2022-06-28T12:30:26Z

Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for all disks that do not have separately allocated queues, and thus remove the need to call blk_cleanup_queue for them. Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that this function is intended only for separately allocated blk-mq queues. This saves an extra queue freeze for devices without a separately allocated queue. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de Signed-off-by: Jens Axboe

Merge tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2022-05-24T21:56:38Z

Pull MMC updates from Ulf Hansson: "MMC core: - Support zero-out using TRIM for eMMC - Allow to override the busy-timeout for the ioctl-cmds MMC host: - Continued the conversion of DT bindings into the JSON schema - jz4740: Apply DMA engine limits to maximum segment size - mmci_stm32: Use a buffer for unaligned DMA requests - mmc_spi: Enabled high-speed modes via parsing of DT - omap: Make clock management to be compliant with CCF - renesas_sdhi: - Support eMMC HS400 mode for R-Car V3H ES2.0 - Don't allow support for eMMC HS400 for R-Car V3M/D3 - sdhci_am654: Fix problem when SD card slot lacks the card detect line - sdhci-esdhc-imx: Add support for the imx8dxl variant - sdhci-brcmstb: Enable support for clock gating to save power - sdhci-msm: - Add support for the sdx65 variant - Add support for the sm8150 variant - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2" * tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci-of-arasan: Add NULL check for data field mmc: core: Support zeroout using TRIM for eMMC mmc: sdhci-brcmstb: Fix compiler warning mmc: sdhci-msm: Add compatible string check for sdx65 dt-bindings: mmc: sdhci-msm: Document the SDX65 compatible mmc: sdhci-msm: Add compatible string check for sm8150 dt-bindings: mmc: sdhci-msm: Add compatible string for sm8150 mmc: sdhci-msm: Add SoC specific compatibles dt-bindings: mmc: sdhci-msm: Convert bindings to yaml dt-bindings: mmc: brcm,sdhci-brcmstb: cleanup example dt-bindings: mmc: brcm,sdhci-brcmstb: correct number of reg entries mmc: sdhci-brcmstb: Enable Clock Gating to save power mmc: sdhci-brcmstb: Re-organize flags mmc: mmci: Remove custom ios handler mmc: atmel-mci: Simplify if(chan) and if(!chan) mmc: core: use kobj_to_dev() dt-bindings: mmc: sdhci-of-dwcmhsc: Add rk3588 mmc: core: Add CIDs for cards to the entropy pool mmc: core: Allows to override the timeout value for ioctl() path mmc: sdhci-omap: Use of_device_get_match_data() helper ...