kernel/drivers/misc/cxl, branch linux-4.16.y

cxl: Check if PSL data-cache is available before issue flush request

2018-05-30T06:17:35Z

[ Upstream commit 94322ed8e857e3b2a33cf75118051af9baaa110f ] PSL9D doesn't have a data-cache that needs to be flushed before resetting the card. However when cxl tries to flush data-cache on such a card, it times-out as PSL_Control register never indicates flush operation complete due to missing data-cache. This is usually indicated in the kernel logs with this message: "WARNING: cache flush timed out" To fix this the patch checks PSL_Debug register CDC-Field(BIT:27) which indicates the absence of a data-cache and sets a flag 'no_data_cache' in 'struct cxl_native' to indicate this. When cxl_data_cache_flush() is called it checks the flag and if set bails out early without requesting a data-cache flush operation to the PSL. Signed-off-by: Vaibhav Jain Acked-by: Andrew Donnellan Acked-by: Frederic Barrat Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

cxl: Fix possible deadlock when processing page faults from cxllib

2018-04-24T07:43:02Z

commit ad7b4e8022b9864c075fe71e1328b1d25cad82f6 upstream. cxllib_handle_fault() is called by an external driver when it needs to have the host resolve page faults for a buffer. The buffer can cover several pages and VMAs. The function iterates over all the pages used by the buffer, based on the page size of the VMA. To ensure some stability while processing the faults, the thread T1 grabs the mm->mmap_sem semaphore with read access (R1). However, when processing a page fault for a single page, one of the underlying functions, copro_handle_mm_fault(), also grabs the same semaphore with read access (R2). So the thread T1 takes the semaphore twice. If another thread T2 tries to access the semaphore in write mode W1 (say, because it wants to allocate memory and calls 'brk'), then that thread T2 will have to wait because there's a reader (R1). If the thread T1 is processing a new page at that time, it won't get an automatic grant at R2, because there's now a writer thread waiting (T2). And we have a deadlock. The timeline is: 1. thread T1 owns the semaphore with read access R1 2. thread T2 requests write access W1 and waits 3. thread T1 requests read access R2 and waits The fix is for the thread T1 to release the semaphore R1 once it got the information it needs from the current VMA. The address space/VMAs could evolve while T1 iterates over the full buffer, but in the unlikely case where T1 misses a page, the external driver will raise a new page fault when retrying the memory access. Fixes: 3ced8d730063 ("cxl: Export library to support IBM XSL") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Frederic Barrat Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2018-02-02T18:01:04Z

Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...

Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping

2018-01-31T19:32:27Z

Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...

Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-01-31T01:58:07Z

Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...

cxl: Remove support for "Processing accelerators" class

2018-01-24T00:43:00Z

The cxl driver currently declares in its table of supported PCI devices the class "Processing accelerators". Therefore it may be called to probe for opencapi devices, which generates errors, as the config space of a cxl device is not compatible with opencapi. So remove support for the generic class, as we now have (at least) two drivers for devices of the same class. Most cxl devices are FPGAs with a PSL which will show a known device ID of 0x477. Other devices are really supported by the cxlflash driver and are already listed in the table. So removing the class is expected to go unnoticed. Signed-off-by: Frederic Barrat Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman

cxl: Add support for ASB_Notify on POWER9

2018-01-19T12:19:37Z

The POWER9 core supports a new feature: ASB_Notify which requires the support of the Special Purpose Register: TIDR. The ASB_Notify command, generated by the AFU, will attempt to wake-up the host thread identified by the particular LPID:PID:TID. This patch assign a unique TIDR (thread id) for the current thread which will be used in the process element entry. Signed-off-by: Christophe Lombard Reviewed-by: Philippe Bergheaud Acked-by: Frederic Barrat Reviewed-by: Vaibhav Jain Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman

powerpc: rename dma_direct_ to dma_nommu_

2018-01-10T15:41:14Z

We want to use the dma_direct_ namespace for a generic implementation, so rename powerpc to the second best choice: dma_nommu_. Signed-off-by: Christoph Hellwig

Merge tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2017-12-01T13:40:17Z

Pull powerpc fixes from Michael Ellerman: "Two fixes for nasty kexec/kdump crashes in certain configurations. A couple of minor fixes for the new TIDR code. A fix for an oops in a CXL error handling path. Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh Salgaonkar, Vaibhav Jain" * tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Do not assign thread.tidr if already assigned powerpc: Avoid signed to unsigned conversion in set_thread_tidr() powerpc/kexec: Fix kexec/kdump in P9 guest kernels powerpc/powernv: Fix kexec crashes caused by tlbie tracing cxl: Check if vphb exists before iterating over AFU devices