kernel/drivers/media/usb/usbtv, branch linux-6.9.y

media: usbtv: Remove useless locks in usbtv_video_free()

2024-03-04T11:58:38Z

Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before 'c838530d230b' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. Fixes: c838530d230b ("media: media videobuf2: Be more flexible on the number of queue stored buffers") Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber") Signed-off-by: Benjamin Gaignard Reviewed-by: Tomasz Figa Tested-by: Hans Verkuil Signed-off-by: Hans Verkuil [hverkuil: fix minor spelling mistake in log message]

media: usb: usbtv: Stop direct calls to queue num_buffers field

2023-11-23T11:37:17Z

Use vb2_get_num_buffers() to avoid using queue num_buffers field directly. This allows us to change how the number of buffers is computed in the future. Signed-off-by: Benjamin Gaignard Reviewed-by: Andrzej Pietrasiewicz Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

usbtv: usbtv_set_regs: the pipe is output

2023-04-11T15:10:10Z

We are setting a value. That is output and the pipe has to match that. Signed-off-by: Oliver Neukum Signed-off-by: Hans Verkuil

media: usbtv: Add PAL-Nc standard

2022-06-20T09:30:30Z

Add PAL-Nc support to usbtv, the corresponding register value "0x00fe" comes from the Windows driver "Active Development Co., Ltd. v2.1.1.2". Signed-off-by: Jorge Maidana Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: Kconfig: cleanup VIDEO_DEV dependencies

2022-03-18T04:58:35Z

media Kconfig has two entries associated to V4L API: VIDEO_DEV and VIDEO_V4L2. On Kernel 2.6.x, there were two V4L APIs, each one with its own flag. VIDEO_DEV were meant to: 1) enable Video4Linux and make its Kconfig options to appear; 2) it makes the Kernel build the V4L core. while VIDEO_V4L2 where used to distinguish between drivers that implement the newer API and drivers that implemented the former one. With time, such meaning changed, specially after the removal of all V4L version 1 drivers. At the current implementation, VIDEO_DEV only does (1): it enables the media options related to V4L, that now has: menu "Video4Linux options" visible if VIDEO_DEV source "drivers/media/v4l2-core/Kconfig" endmenu but it doesn't affect anymore the V4L core drivers. The rationale is that the V4L2 core has a "soft" dependency at the I2C bus, and now requires to select a number of other Kconfig options: config VIDEO_V4L2 tristate depends on (I2C || I2C=n) && VIDEO_DEV select RATIONAL select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE default (I2C || I2C=n) && VIDEO_DEV In the past, merging them would be tricky, but it seems that it is now possible to merge those symbols, in order to simplify V4L dependencies. Let's keep VIDEO_DEV, as this one is used on some make *defconfig configurations. Suggested-by: Laurent Pinchart Reviewed-by: Laurent Pinchart Reviewed-by: Jacopo Mondi Reviewed-by: Neil Armstrong # for meson-vdec & meson-ge2d Acked-by: Andrzej Pietrasiewicz Acked-by: Łukasz Stelmach Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2021-04-28T16:24:36Z

Pull media updates from Mauro Carvalho Chehab: - addition of a maintainer's profile for the media subsystem - addition of i.MX8 IP support - qcom/camss gained support for hardware version Titan 170 - new RC keymaps - Lots of other improvements, cleanups and bug fixes * tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits) media: coda: fix macroblocks count control usage media: rkisp1: params: fix wrong bits settings media: cedrus: Fix H265 status definitions media: meson-ge2d: fix rotation parameters media: v4l2-ctrls: fix reference to freed memory media: venus : hfi: add venus image info into smem media: venus: Fix internal buffer size calculations for v6. media: venus: helpers: keep max bandwidth when mbps exceeds the supported range media: venus: fix hw overload error log condition media: venus: core: correct firmware name for sm8250 media: venus: core,pm: fix potential infinite loop media: venus: core: Fix kerneldoc warnings media: gscpa/stv06xx: fix memory leak media: cx25821: remove unused including media: staging: media/meson: remove redundant dev_err call media: adv7842: support 1 block EDIDs, fix clearing EDID media: adv7842: configure all pads media: allegro: change kernel-doc comment blocks to normal comments media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init() media: i2c: rdamc21: Fix warning on u8 cast ...

media: usbtv: constify static structs

2021-03-11T10:59:42Z

Constify two static structs which are never modified to allow the compiler to put them in read-only memory. The only usage of norm_params is only read from it in usbtv_configure_for_norm(). Making it const shrinks the resulting ko-file with 300 bytes (tested with gcc 10). The only usage of usbtv_ioctl_ops is to put its address to the ioctl_ops field in the video_device struct. Making it const moves ~1kb to read-only memory. Signed-off-by: Rikard Falkeborn Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: usbtv: Fix deadlock on suspend

2021-03-11T10:40:28Z

usbtv doesn't support power management, so on system suspend the .disconnect callback of the driver is called. The teardown sequence includes a call to snd_card_free. Its implementation waits until the refcount of the sound card device drops to zero, however, if its file is open, snd_card_file_add takes a reference, which can't be dropped during the suspend, because the userspace processes are already frozen at this point. snd_card_free waits for completion forever, leading to a hang on suspend. This commit fixes this deadlock condition by replacing snd_card_free with snd_card_free_when_closed, that doesn't wait until all references are released, allowing suspend to progress. Fixes: 63ddf68de52e ("[media] usbtv: add audio support") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: usbtv: Fix refcounting mixup

2020-10-08T07:08:20Z

The premature free in the error path is blocked by V4L refcounting, not USB refcounting. Thanks to Ben Hutchings for review. [v2] corrected attributions Signed-off-by: Oliver Neukum Fixes: 50e704453553 ("media: usbtv: prevent double free in error case") CC: stable@vger.kernel.org Reported-by: Ben Hutchings Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: media/usb: use vb2_video_unregister_device()

2020-08-28T13:02:52Z

Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab