kernel/drivers/media/rc/mceusb.c, branch linux-rolling-stable

media: mceusb: don't include 'pm_wakeup.h' directly

2024-12-11T18:48:17Z

The header clearly states that it does not want to be included directly, only via 'device.h'. 'platform_device.h' works equally well. Remove the direct inclusion. Signed-off-by: Wolfram Sang Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: mceusb: don't push static constants on stack for %*ph

2024-12-11T18:48:17Z

There is no need to pass constants via stack. The width may be explicitly specified in the format. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: Convert from tasklet to BH workqueue

2024-06-21T06:57:09Z

The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. This patch converts drivers/media/* from tasklet to BH workqueue. Based on the work done by Tejun Heo Signed-off-by: Allen Pais Signed-off-by: Hans Verkuil

media: mceusb: No need for vendor/product ID in name

2024-05-31T12:20:40Z

This is available in other places and doesn't belong in the name of the rc device. Signed-off-by: Sean Young Signed-off-by: Hans Verkuil

media: mceusb: set timeout to at least timeout provided

2022-09-24T05:50:42Z

By rounding down, the actual timeout can be lower than requested. As a result, long spaces just below the requested timeout can be incorrectly reported as timeout and truncated. Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable") Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: mceusb: Use new usb_control_msg_*() routines

2022-09-24T05:49:45Z

Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Reported-and-tested-by: Rondreis Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/ Signed-off-by: Alan Stern Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: remove third argument of usb_maxpacket()

2022-04-23T08:33:53Z

The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Sean Young CC: Mauro Carvalho Chehab CC: Benjamin Valentin Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/r/20220317035514.6378-5-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

media: mceusb: fix control-message timeouts

2021-11-19T06:03:51Z

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable@vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: mceusb: return without resubmitting URB in case of -EPROTO error.

2021-09-30T08:08:01Z

Syzkaller reported a warning called "rcu detected stall in dummy_timer". The error seems to be an error in mceusb_dev_recv(). In the case of -EPROTO error, the routine immediately resubmits the URB. Instead it should return without resubmitting URB. Reported-by: syzbot+4d3749e9612c2cfab956@syzkaller.appspotmail.com Signed-off-by: Rajat Asthana Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: mceusb: ensure rx resolution can be retrieved

2021-09-30T08:07:40Z

The receiver resolution is not populated. The resolution can be used to for various purposes like calculating the margins the decoder should use. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab