kernel/drivers/media/platform/Makefile, branch linux-5.1.y

media: soc_camera: Move to the staging tree

2019-02-18T17:09:19Z

The SoC camera framework has no functional drivers left, something that has not changed for years. Move the leftovers to the staging tree. Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: platform: Add Aspeed Video Engine driver

2018-12-12T17:05:12Z

The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can capture and compress video data from digital or analog sources. With the Aspeed chip acting a service processor, the Video Engine can capture the host processor graphics output. Add a V4L2 driver to capture video data and compress it to JPEG images. Make the video frames available through the V4L2 streaming interface. Signed-off-by: Eddie James Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: sun6i: Add support for Allwinner CSI V3s

2018-11-23T10:15:59Z

Allwinner V3s SoC features a CSI module with parallel interface. This patch implement a v4l2 framework driver for it. Reviewed-by: Hans Verkuil Reviewed-by: Maxime Ripard Tested-by: Maxime Ripard Signed-off-by: Yong Deng Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: add SECO cec driver

2018-11-22T18:12:28Z

This patch adds support to the CEC device implemented with a STM32 microcontroller in X86 SECO Boards, including UDOO X86. The communication is achieved via Braswell integrated SMBus (i2c-i801). The driver use direct access to the PCI addresses, due to the limitations of the specific driver in presence of ACPI calls. The basic functionalities are tested with success with cec-ctl and cec-compliance. Inspired by cros-ec-cec implementation, attaches to i915 driver cec-notifier. Signed-off-by: Ettore Chimenti Reviewed-by: Jacopo Mondi Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: imx-pxp: add i.MX Pixel Pipeline driver

2018-09-11T17:32:17Z

Add a V4L2 mem-to-mem scaler/CSC driver for the Pixel Pipeline (PXP) version found on i.MX6ULL SoCs. A similar variant is used on i.MX7D. Since this driver only uses the legacy pipeline, it should be reasonably easy to extend it to work with the older PXP versions found on i.MX6UL, i.MX6SX, i.MX6SL, i.MX28, and i.MX23. The driver supports scaling and colorspace conversion. There is currently no support for rotation, alpha-blending, and the LUTs. Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2018-08-20T22:38:44Z

Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...

media: Rename CAMSS driver path

2018-08-02T10:08:12Z

Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: vicodec: add the virtual codec driver

2018-07-25T12:16:46Z

Add the virtual codec driver that uses the Fast Walsh Hadamard Transform. Keiichi Watanabe contributed the multiplanar support. Signed-off-by: Hans Verkuil Co-Developed-by: Keiichi Watanabe Signed-off-by: Keiichi Watanabe Signed-off-by: Mauro Carvalho Chehab

media: platform: Add ChromeOS EC CEC driver

2018-07-13T07:44:46Z

The ChromeOS Embedded Controller can expose a CEC bus, this patch add the driver for such feature of the Embedded Controller. This driver is part of the cros-ec MFD and will be add as a sub-device when the feature bit is exposed by the EC. The controller will only handle a single logical address and handles all the messages retries and will only expose Success or Error. The controller will be tied to the HDMI CEC notifier by using the platform DMI Data and the i915 device name and connector name. Signed-off-by: Neil Armstrong Reviewed-by: Enric Balletbo i Serra Reviewed-by: Hans Verkuil Signed-off-by: Lee Jones

media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver

2018-05-16T15:12:21Z

The Cadence CSI-2 RX Controller is an hardware block meant to be used as a bridge between a CSI-2 bus and pixel grabbers. It supports operating with internal or external D-PHY, with up to 4 lanes, or without any D-PHY. The current code only supports the latter case. It also support dynamic mapping of the CSI-2 virtual channels to the associated pixel grabbers, but that isn't allowed at the moment either. Acked-by: Benoit Parrot Reviewed-by: Niklas Söderlund Signed-off-by: Maxime Ripard Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab