kernel/drivers/media/dvb-frontends/a8293.c, branch linux-6.9.y

media: Switch i2c drivers back to use .probe()

2023-05-25T14:21:21Z

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Hans Verkuil

media: dvb-frontends: a8293: fix LNB powerup failure in PCTV 461e

2022-11-25T09:55:55Z

Fixes a8293 failure to raise LNB voltage in PCTV 461e DVB-S2 Stick affecting multiple users over several years as found here: http://www.linuxquestions.org/questions/linux-hardware-18/pctv-dvb-s2-stick-461e-not-feeding-lnb-4175529374/ https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(461e) https://github.com/OpenELEC/OpenELEC.tv/issues/3731 Caused by vIN undervoltage lockout (status register bit 7) when raising LNB to 18V. Addressed by using the higher-precision voltages available on the a8293 to gradually increase (slew) the voltage when voltage increases are requested. Adds volt_slew_nanos_per_mv to a8293_platform_data struct for specifying slew rate. If value is <1 or non-sane (>1600), the original no-slew version for a8293_set_voltage is used. Link: https://lore.kernel.org/linux-media/20211231035326.6759-1-cjritola@gmail.com [mchehab: fixed some coding style issues] Signed-off-by: Chuck Ritola Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends/a8293: Convert to i2c's .probe_new()

2022-11-21T10:04:18Z

The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König Signed-off-by: Hans Verkuil

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37Z

Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman

[media] dvb-frontends: Drop owner assignment from i2c_driver

2015-08-11T15:58:20Z

i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mauro Carvalho Chehab

[media] a8293: coding style issues

2015-08-11T10:10:04Z

Remove FSF address from license. Indent parameter correctly. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

[media] a8293: improve LNB register programming logic

2015-08-11T10:09:42Z

On power-on LNB power supply voltage is disabled, due to that no need to disable it during probe. Tone is supply is hard-coded as external tone coming from the demodulator. Program both voltage and tone on set_voltage(). Use register cache to prevent unneeded programming. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

[media] a8293: use i2c_master_send / i2c_master_recv for I2C I/O

2015-08-11T10:09:13Z

As driver is now proper I2C client driver, we could use correct functions for I2C I/O. Also rename state from priv to dev. Fix logging too. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

[media] a8293: remove legacy media attach

2015-08-11T10:08:32Z

Remove legacy media attach as all users are on I2C bindings now. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab