kernel/drivers/leds, branch linux-6.8.y

leds: trigger: netdev: Fix kernel panic on interface rename trig notify

2024-04-03T13:32:15Z

[ Upstream commit 415798bc07dd1c1ae3a656aa026580816e0b9fe8 ] Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function. This changed the logic where, in the previous implementation the dev from the trigger event was used to check if the carrier was ok, but in the new implementation with the generic function, the dev in trigger_data is used instead. This is problematic and cause a possible kernel panic due to the fact that the dev in the trigger_data still reference the old one as the new one (passed from the trigger event) still has to be hold and saved in the trigger_data struct (done in the NETDEV_REGISTER case). On calling of get_device_state(), an invalid net_dev is used and this cause a kernel panic. To handle this correctly, move the call to get_device_state() after the new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER case) and correctly parse the new dev. Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240203235413.1146-1-ansuelsmth@gmail.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: sgm3140: Add missing timer cleanup and flash gpio control

2024-03-26T22:17:18Z

[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ] Enabling strobe and then setting brightness to 0 causes the driver to enter invalid state after strobe end timer fires. We should cancel strobe mode resources when changing brightness (aka torch mode). Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver") Signed-off-by: Ondrej Jirman Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: aw2013: Unlock mutex before destroying it

2024-03-26T22:17:18Z

[ Upstream commit 6969d0a2ba1adc9ba6a49b9805f24080896c255c ] In the probe() callback in case of error mutex is destroyed being locked which is not allowed so unlock the mutex before destroying. Fixes: 59ea3c9faf32 ("leds: add aw2013 driver") Signed-off-by: George Stark Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231214173614.2820929-2-gnstark@salutedevices.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

2024-01-17T23:25:27Z

Pull LED updates from Lee Jones: "New Drivers: - Add support for Allwinner A100 RGB LED controller - Add support for Maxim 5970 Dual Hot-swap controller New Device Support: - Add support for AW20108 to Awinic LED driver New Functionality: - Extend support for Net speeds to include; 2.5G, 5G and 10G - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required - Add support for hardware control in AW200xx Fix-ups: - Use safer methods for string handling - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Replace Mutex use with the Completion mechanism - Fix include lists; alphabetise, remove unused, explicitly add used - Use generic platform device properties - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Continue work to remove superfluous platform .remove() call-backs - Remove superfluous/defunct code - Trivial; whitespace, unused variables, spelling, clean-ups, etc - Avoid unnecessary duplicate locks Bug Fixes: - Repair Kconfig based dependency lists - Ensure unused dynamically allocated data is freed after use - Fix support for brightness control - Add missing sufficient delays during reset to ensure correct operation - Avoid division-by-zero issues" * tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits) leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control leds: trigger: panic: Don't register panic notifier if creating the trigger failed leds: sun50i-a100: Convert to be agnostic to property provider leds: max5970: Add missing headers leds: max5970: Make use of dev_err_probe() leds: max5970: Make use of device properties leds: max5970: Remove unused variable leds: rgb: Drop obsolete dependency on COMPILE_TEST leds: sun50i-a100: Avoid division-by-zero warning leds: trigger: Remove unused function led_trigger_rename_static() leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails dt-bindings: leds: qcom,spmi-flash-led: Fix example node name dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints dt-bindings: leds: awinic,aw200xx: Add AW20108 device leds: aw200xx: Add support for aw20108 device leds: aw200xx: Improve autodim calculation method leds: aw200xx: Enable disable_locking flag in regmap config leds: aw200xx: Add delay after software reset dt-bindings: leds: aw200xx: Remove property "awinic,display-rows" ...

Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

2024-01-12T22:59:50Z

Pull pwm updates from Thierry Reding: "This contains a bunch of cleanups and simplifications across the board, as well as a number of small fixes. Perhaps the most notable change here is the addition of an API that allows PWMs to be used in atomic contexts, which is useful when time- critical operations are involved, such as using a PWM to generate IR signals. Finally, I have decided to step down as PWM subsystem maintainer. Due to other responsibilities I have lately not been able to find the time that the subsystem deserves and Uwe, who has been helping out a lot for the past few years and has many things planned for the future, has kindly volunteered to take over. I have no doubt that he will be a suitable replacement" * tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) MAINTAINERS: pwm: Thierry steps down, Uwe takes over pwm: linux/pwm.h: fix Excess kernel-doc description warning pwm: Add pwm_apply_state() compatibility stub pwm: cros-ec: Drop documentation for dropped struct member pwm: Drop two unused API functions pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs pwm: meson: Simplify using dev_err_probe() pwm: stmpe: Silence duplicate error messages pwm: Reduce number of pointer dereferences in pwm_device_request() pwm: crc: Use consistent variable naming for driver data pwm: omap-dmtimer: Drop locking dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml media: pwm-ir-tx: Trigger edges from hrtimer interrupt context pwm: bcm2835: Allow PWM driver to be used in atomic context pwm: Make it possible to apply PWM changes in atomic context pwm: renesas: Remove unused include pwm: Replace ENOTSUPP with EOPNOTSUPP pwm: Rename pwm_apply_state() to pwm_apply_might_sleep() pwm: Stop referencing pwm->chip pwm: Update kernel doc for struct pwm_chip ...

leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control

2023-12-21T16:25:21Z

If hw doesn't support sw control of the LED and we switch to a mode not supported by hw, currently we get lots of errors because neither brigthness_set() nor brithness_set_blocking() is set. Deal with this by not falling back to sw control, and return -EOPNOTSUPP to the user. Note that we still store the new mode. This is needed in case an intermediate unsupported mode is necessary to switch from one supported mode to another. Add a comment explaining how a driver for such hw is supposed to behave. Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/3fd5184c-3641-4b0b-b59a-f489ec69a6cd@gmail.com Signed-off-by: Lee Jones

leds: trigger: panic: Don't register panic notifier if creating the trigger failed

2023-12-21T14:54:45Z

It doesn't make sense to register the panic notifier if creating the panic trigger failed. Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/8a61e229-5388-46c7-919a-4d18cc7362b2@gmail.com Signed-off-by: Lee Jones

leds: sun50i-a100: Convert to be agnostic to property provider

2023-12-21T14:45:35Z

Convert the driver to be agnostic to the property provider. LEDS subsytem is not dependent on OF, so no need to make drivers be a such. Signed-off-by: Andy Shevchenko Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20231214192131.1309912-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones

leds: max5970: Add missing headers

2023-12-21T14:42:59Z

Don't inherit headers "by chance" from others. Include the needed ones explicitly. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231214184050.1272848-5-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones

leds: max5970: Make use of dev_err_probe()

2023-12-21T14:42:59Z

Simplify the error handling in probe function by switching from dev_err() to dev_err_probe(). Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231214184050.1272848-4-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones