kernel/drivers/leds/trigger/ledtrig-netdev.c, branch linux-6.9.y

leds: trigger: netdev: Fix kernel panic on interface rename trig notify

2024-03-07T08:48:08Z

Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function. This changed the logic where, in the previous implementation the dev from the trigger event was used to check if the carrier was ok, but in the new implementation with the generic function, the dev in trigger_data is used instead. This is problematic and cause a possible kernel panic due to the fact that the dev in the trigger_data still reference the old one as the new one (passed from the trigger event) still has to be hold and saved in the trigger_data struct (done in the NETDEV_REGISTER case). On calling of get_device_state(), an invalid net_dev is used and this cause a kernel panic. To handle this correctly, move the call to get_device_state() after the new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER case) and correctly parse the new dev. Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240203235413.1146-1-ansuelsmth@gmail.com Signed-off-by: Lee Jones

leds: trigger: netdev: Display only supported link speed attribute

2024-03-07T08:47:57Z

With the addition of more link speed mode to the netdev trigger, it was pointed out that there may be a problem with bloating the attribute list with modes that won't ever be supported by the trigger as the attached device name doesn't support them. To clear and address this problem, change the logic where these additional trigger modes are listed. Since the netdev trigger REQUIRE a device name to be set, attach to the device name change function additional logic to parse the supported link speed modes using ethtool APIs and show only the supported link speed modes attribute. Link speed attribute are refreshed on device_name set and on NETDEV_CHANGE events. This only apply to the link speed modes and every other mode is still provided by default. Signed-off-by: Christian Marangi Reviewed-by: Marek Behún Link: https://lore.kernel.org/r/20240111160501.1774-1-ansuelsmth@gmail.com Signed-off-by: Lee Jones

leds: trigger: netdev: Add module alias ledtrig:netdev

2024-03-07T08:47:56Z

Add module alias ledtrig:netdev to enable auto-loading of the module. Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/84a1bbd3-1ac7-4f37-849a-7f4d31698f76@gmail.com Signed-off-by: Lee Jones

leds: trigger: netdev: Skip setting baseline state in activate if hw-controlled

2024-03-07T08:47:50Z

The current codes uses the sw_control path in set_baseline_state() when called from netdev_trig_activate() even if we're hw-controlled. This may result in errors when led_set_brightness() is called because we may not have set_brightness led ops (if hw doesn't support setting a "LED" to ON). In addition this path may schedule trigger_data->work which doesn't make sense when being hw-controlled. Therefore set trigger_data->hw_control = true before calling set_device_name() from netdev_trig_activate(). In this call chain we have to prevent set_baseline_state() from being called, because this would call hw_control_set(). Use led_cdev->trigger_data == NULL as indicator for being called from netdev_trig_activate(). Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/d3f2859c-2673-401c-a4f7-fcaef2167991@gmail.com Signed-off-by: Lee Jones

Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

2024-01-17T23:25:27Z

Pull LED updates from Lee Jones: "New Drivers: - Add support for Allwinner A100 RGB LED controller - Add support for Maxim 5970 Dual Hot-swap controller New Device Support: - Add support for AW20108 to Awinic LED driver New Functionality: - Extend support for Net speeds to include; 2.5G, 5G and 10G - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required - Add support for hardware control in AW200xx Fix-ups: - Use safer methods for string handling - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Replace Mutex use with the Completion mechanism - Fix include lists; alphabetise, remove unused, explicitly add used - Use generic platform device properties - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Continue work to remove superfluous platform .remove() call-backs - Remove superfluous/defunct code - Trivial; whitespace, unused variables, spelling, clean-ups, etc - Avoid unnecessary duplicate locks Bug Fixes: - Repair Kconfig based dependency lists - Ensure unused dynamically allocated data is freed after use - Fix support for brightness control - Add missing sufficient delays during reset to ensure correct operation - Avoid division-by-zero issues" * tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits) leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control leds: trigger: panic: Don't register panic notifier if creating the trigger failed leds: sun50i-a100: Convert to be agnostic to property provider leds: max5970: Add missing headers leds: max5970: Make use of dev_err_probe() leds: max5970: Make use of device properties leds: max5970: Remove unused variable leds: rgb: Drop obsolete dependency on COMPILE_TEST leds: sun50i-a100: Avoid division-by-zero warning leds: trigger: Remove unused function led_trigger_rename_static() leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails dt-bindings: leds: qcom,spmi-flash-led: Fix example node name dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints dt-bindings: leds: awinic,aw200xx: Add AW20108 device leds: aw200xx: Add support for aw20108 device leds: aw200xx: Improve autodim calculation method leds: aw200xx: Enable disable_locking flag in regmap config leds: aw200xx: Add delay after software reset dt-bindings: leds: aw200xx: Remove property "awinic,display-rows" ...

leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control

2023-12-21T16:25:21Z

If hw doesn't support sw control of the LED and we switch to a mode not supported by hw, currently we get lots of errors because neither brigthness_set() nor brithness_set_blocking() is set. Deal with this by not falling back to sw control, and return -EOPNOTSUPP to the user. Note that we still store the new mode. This is needed in case an intermediate unsupported mode is necessary to switch from one supported mode to another. Add a comment explaining how a driver for such hw is supposed to behave. Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/3fd5184c-3641-4b0b-b59a-f489ec69a6cd@gmail.com Signed-off-by: Lee Jones

leds: trigger: netdev: Extend speeds up to 10G

2023-12-13T11:24:47Z

Add 2.5G, 5G and 10G as available speeds to the netdev LED trigger. Signed-off-by: Daniel Golle Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/99e7d3304c6bba7f4863a4a80764a869855f2085.1701143925.git.daniel@makrotopia.org Signed-off-by: Lee Jones

leds: trigger: netdev: fix RTNL handling to prevent potential deadlock

2023-12-06T15:36:55Z

When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Acked-by: Lee Jones Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com Signed-off-by: Jakub Kicinski

leds: trigger: netdev: Move size check in set_device_name

2023-11-01T11:29:14Z

GCC 13.2 complains about array subscript 17 is above array bounds of 'char[16]' with IFNAMSIZ set to 16. The warning is correct but this scenario is impossible. set_device_name is called by device_name_store (store sysfs entry) and netdev_trig_activate. device_name_store already check if size is >= of IFNAMSIZ and return -EINVAL. (making the warning scenario impossible) netdev_trig_activate works on already defined interface, where the name has already been checked and should already follow the condition of strlen() < IFNAMSIZ. Aside from the scenario being impossible, set_device_name can be improved to both mute the warning and make the function safer. To make it safer, move size check from device_name_store directly to set_device_name and prevent any out of bounds scenario. Cc: stable@vger.kernel.org Fixes: 28a6a2ef18ad ("leds: trigger: netdev: refactor code setting device name") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202309192035.GTJEEbem-lkp@intel.com/ Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20231007131042.15032-1-ansuelsmth@gmail.com Signed-off-by: Lee Jones

Merge tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

2023-09-04T20:52:58Z

Pull LED updates from Lee Jones: "Core Frameworks: - Add new framework to support Group Multi-Color (GMC) LEDs - Offer an 'optional' API for non-essential LEDs - Support obtaining 'max brightness' values from Device Tree - Provide new led_classdev member 'color' (settable via DT and SYFS) - Stop TTY Trigger from using the old LED_ON constraints - Statically allocate leds_class New Drivers: - Add support for NXP PCA995x I2C Constant Current LED Driver New Device Support: - Add support for Siemens Simatic IPC BX-21 to Simatic IPC Fix-ups: - Some dependency / Kconfig tweaking - Move final probe() functions back over from .probe_new() - Simplify obtaining resources (memory, device data) using unified API helpers - Bunch of Device Tree additions, conversions and adaptions - Fix trivial styling issues; comments - Ensure correct includes are present and remove some that are not required - Omit the use of redundant casts and if relevant replace with better ones - Use purpose-built APIs for various actions; sysfs_emit(), module_led_trigger() - Remove a bunch of superfluous locking Bug Fixes: - Ensure error codes are correctly propagated back up the call chain - Fix incorrect error values from being returned (missing '-') - Ensure get'ed resources are put'ed to prevent leaks - Use correct class when exporting module resources - Fixing rounding (or lack there of) issues - Fix 'always false' LED_COLOR_ID_MULTI BUG() check" * tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (40 commits) leds: aw2013: Enable pull-up supply for interrupt and I2C dt-bindings: leds: Document pull-up supply for interrupt and I2C dt-bindings: leds: aw2013: Document interrupt leds: uleds: Use module_misc_device macro to simplify the code leds: trigger: netdev: Use module_led_trigger macro to simplify the code dt-bindings: leds: Fix reference to definition of default-state leds: turris-omnia: Drop unnecessary mutex locking leds: turris-omnia: Use sysfs_emit() instead of sprintf() leds: Make leds_class a static const structure leds: Remove redundant of_match_ptr() dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead dt-bindings: leds: rohm,bd71828: Drop select:false leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false leds: multicolor: Use rounded division when calculating color components leds: rgb: Add a multicolor LED driver to group monochromatic LEDs dt-bindings: leds: Add binding for a multicolor group of LEDs leds: class: Store the color index in struct led_classdev leds: Provide devm_of_led_get_optional() leds: pca995x: Fix MODULE_DEVICE_TABLE for OF ...