kernel/drivers/input/touchscreen, branch linux-5.7.y

Revert "Input: elants_i2c - report resolution information for touch major"

2020-07-22T07:34:21Z

commit 93b9de223c0135db495c25334e66cb669bef13e2 upstream. This reverts commit 061706716384f1633d3d5090b22a99f33f1fcf2f - it turns out that the resolution of 1 unit per mm was not correct for a number of touch screens, causing touch sizes to be reported as way too large. See https://crbug.com/1085648 Reported-by: Harry Cutts Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: mms114 - add extra compatible for mms345l

2020-07-22T07:34:05Z

[ Upstream commit 7842087b0196d674ed877d768de8f2a34d7fdc53 ] MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152. However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization. TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now. But we probably shouldn't print something from a random register. Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future. Signed-off-by: Stephan Gerhold Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: edt-ft5x06 - fix get_default register write access

2020-06-24T15:48:21Z

[ Upstream commit 255cdaf73412de13608fb776101402dca68bed2b ] Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults(). Fixes: b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") Signed-off-by: Marco Felsch Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-05-28T19:41:11Z

Pull input fixes from Dmitry Torokhov: "Just a few random driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add a second working PNP_ID for Lenovo T470s Input: applespi - replace zero-length array with flexible-array Input: axp20x-pek - always register interrupt handlers Input: lm8333 - update contact email Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Input: synaptics-rmi4 - really fix attn_data use-after-free Input: i8042 - add ThinkPad S230u to i8042 reset list Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" Input: dlink-dir685-touchkeys - fix a typo in driver name Input: xpad - add custom init packet for Xbox One S controllers Input: evdev - call input_flush_device() on release(), not flush() Input: i8042 - add ThinkPad S230u to i8042 nomux list Input: usbtouchscreen - add support for BonXeon TP Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper Input: mms114 - fix handling of mms345l Input: elants_i2c - support palm detection

Input: usbtouchscreen - add support for BonXeon TP

2020-04-19T04:31:20Z

Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by: James Hilliard Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: mms114 - fix handling of mms345l

2020-04-15T04:28:35Z

MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Reviewed-by: Andi Shyti Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov

Input: elants_i2c - support palm detection

2020-04-15T04:28:34Z

Elan uses the least significant bit of byte 33 to signal the type of contact (finger versus palm). The default value is 1 for all firmwares, which is reported as MT_TOOL_FINGER. If firmware supports palm detection, the bit will change to 0 and the driver will report such contact as MT_TOOL_PALM. Signed-off-by: Johnny Chuang Reviewed-by: Peter Hutterer Link: https://lore.kernel.org/r/1585551756-29066-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-04-08T03:20:12Z

Pull input updates from Dmitry Torokhov: "An update to the Goodix touchscreen driver to enable it work properly on various Bay Trail and Cherry Trail devices, and a few other assorted changes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: update SPDX tag for input-event-codes.h Input: i8042 - add Acer Aspire 5738z to nomux list Input: goodix - fix compilation when ACPI support is disabled dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema Input: of_touchscreen - explicitly choose axis Input: goodix - support gt9147 touchpanel dt-bindings: touchscreen: goodix: support of gt9147 Input: goodix - add support for Goodix GT917S Input: goodix - use string-based chip ID dt-bindings: input: touchscreen: add compatible string for Goodix GT917S Input: goodix - add support for more then one touch-key Input: goodix - fix spurious key release events Input: goodix - try to reset the controller if the i2c-test fails Input: goodix - restore config on resume if necessary Input: goodix - make goodix_send_cfg() take a raw buffer as argument Input: goodix - add minimum firmware size check Input: goodix - save a copy of the config from goodix_read_config() Input: goodix - move defines to above struct goodix_ts_data declaration Input: goodix - add support for controlling the IRQ pin through ACPI methods Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices ...

Merge branch 'next' into for-linus

2020-04-07T03:56:50Z

Prepare input updates for 5.7 merge window.

Input: goodix - fix compilation when ACPI support is disabled

2020-04-01T20:05:29Z

acpi_evaluate_object() and acpi_execute_simple_method() are not part of the group of ACPI related functions which get stubbed by include/linux/acpi.h when ACPI support is disabled, so the IRQ_PIN_ACCESS_ACPI_METHOD handling code must be stubbed out. For consistency use the same #if condition as which is used to replace goodix_add_acpi_gpio_mappings with a stub. Fixes: c5fca485320e ("Input: goodix - add support for controlling the IRQ pin through ACPI methods") Reported-by: kbuild test robot Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200401014529.GL75430@dtor-ws [dtor: stubbed out the ACPI method accessors] Reviewed-by: Bastien Nocera Signed-off-by: Dmitry Torokhov