kernel/drivers/input/touchscreen, branch linux-4.1.y

Input: ar1021_i2c - fix too long name in driver's device table

2018-05-23T01:33:48Z

[ Upstream commit 95123fc43560d6f4a60e74f72836e63cd8848f76 ] The name field in structure i2c_device_id is 20 characters, and we expect it to be NULL-terminated, however we are trying to stuff it with 21 bytes and thus NULL-terminator is lost. This causes issues when one creates device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C", and automatic module loading by alias does not work as result. The -I2C suffix in the device name is superfluous, we know what bus we are dealing with, so let's drop it. Also, no other driver uses capitals, and the manufacturer name is normally not included, except in very rare cases of incompatible name collisions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211 Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen") Reviewed-By: Christian Gmeiner Tested-by: Martin Kepplinger Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: tsc2007 - check for presence and power down tsc2007 during probe

2018-05-23T01:33:42Z

[ Upstream commit 934df23171e7c5b71d937104d4957891c39748ff ] 1. check if chip is really present and don't succeed if it isn't. 2. if it succeeds, power down the chip until accessed Signed-off-by: H. Nikolaus Schaller Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: 88pm860x-ts - fix child-node lookup

2018-03-01T03:09:38Z

[ Upstream commit 906bf7daa0618d0ef39f4872ca42218c29a3631f ] Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support") Cc: stable # 3.7 Signed-off-by: Johan Hovold Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: sur40 - validate number of endpoints before using them

2017-05-17T19:07:02Z

[ Upstream commit 92461f5d723037530c1f36cce93640770037812c ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40... ") Signed-off-by: Johan Hovold Cc: stable@vger.kernel.org # 3.13 Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data

2017-03-06T22:29:11Z

[ Upstream commit 1c3415a06b1016a596bfe59e0cfee56c773aa958 ] The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[] [] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [] irq_thread_fn+0x20/0x40 [ 2189.435123] [] irq_thread+0x14e/0x222 [ 2189.435135] [] ? __schedule+0x3b3/0x57a [ 2189.435145] [] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [] kthread+0x10e/0x116 [ 2189.435178] [] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [] ret_from_fork+0x7c/0xb0 [ 2189.435199] [] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: zforce_ts - fix dual touch recognition

2016-07-11T03:07:18Z

[ Upstream commit 6984ab1ab35f422292b7781c65284038bcc0f6a6 ] A wrong decoding of the touch coordinate message causes a wrong touch ID. Touch ID for dual touch must be 0 or 1. According to the actual Neonode nine byte touch coordinate coding, the state is transported in the lower nibble and the touch ID in the higher nibble of payload byte five. Signed-off-by: Knut Wohlrab Signed-off-by: Oleksij Rempel Signed-off-by: Dirk Behme Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: wacom_w8001 - w8001_MAX_LENGTH should be 13

2016-07-11T00:20:02Z

[ Upstream commit 12afb34400eb2b301f06b2aa3535497d14faee59 ] Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen

2015-08-10T19:21:56Z

commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream. This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Suggested-by: Jakob Mustafa Signed-off-by: Bernhard Bender Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: pixcir_i2c_ts - fix receive error

2015-07-21T17:10:06Z

commit 469d7d22cea146e40efe8c330e5164b4d8f13934 upstream. The i2c_master_recv() uses readsize to receive data from i2c but compares to size of rdbuf which is always 27. This would cause problem when the max_fingers is not 5. Change the comparison value to readsize instead. Fixes: 36874c7e219 ("Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDs:) Signed-off-by: Frodo Lai Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-05-22T21:49:55Z

Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem. The main change is that we tell joydev not to touch "absolute mice", such as VMware virtual mouse, as that produced bad result (cursor stuck in upper right corner) with games" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: smtpe-ts - wait 50mS until polling for pen-up Input: smtpe-ts - use msecs_to_jiffies() instead of HZ Input: joydev - don't classify the vmmouse as a joystick Input: vmmouse - do not reference non-existing version of X driver Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad Input: elantech - fix semi-mt protocol for v3 HW Input: sx8654 - fix memory allocation check