kernel/drivers/input/touchscreen/wm97xx-core.c, branch linux-4.3.y

ALSA: ac97: Switch to dev_pm_ops

2015-08-21T17:27:23Z

Convert the ac97_bus from legacy suspend/resume callbacks to dev_pm_ops. Since there isn't anything special to do at the bus level the bus driver does not have to implement any callbacks. The device driver core will automatically pick up and execute the device's PM ops. As there is only a single AC'97 driver implementing suspend and resume, update both the core and driver at the same time to avoid unnecessary code churn. While we are at it also drop the ifdefs around the suspend/resume functions to increase compile test coverage. Signed-off-by: Lars-Peter Clausen Acked-by: Dmitry Torokhov Signed-off-by: Takashi Iwai

Input: wm97xx - adapt parameters to tosa touchscreen.

2014-10-25T00:27:31Z

Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Dmitry Torokhov

Input: use dev_get_platdata()

2013-12-06T10:06:29Z

Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Acked-by: Fugang Duan Signed-off-by: Dmitry Torokhov

Input: wm97xx - drop out of range inputs

2013-03-12T15:50:18Z

With fast movements, there occured some out of screen jumps with my touchscreen. The abs_x and abs_y module parameters should fix this by default, but the driver doesn't actively checks the x/y coordinates. Instead it seems that the input layer was supposed to drop out of range inputs, as described in the comments: "These parameters are used to help the input layer discard out of range readings and reduce jitter etc" The input layer documentation describes that values that are not in the absolute range are also accepted. So this patch adds a check within the driver. Signed-off-by: Markus Pargmann Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

Input: wm97xx-core - add retries to wm97xx_read_aux_adc

2010-09-05T19:14:36Z

Add logic to wm97xx_read_aux_adc() to retry reading the adc if the sample failed. This could occur if the previous sample was still in the return register or the sample timed-out. Also avoid a pathologic failure mode by disabling the digitizer and returning -EBUSY after 5 retries. Signed-off-by: Eric Millbrandt Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov

Input: wm97xx-core - simplify error path in wm97xx_probe()

2010-09-05T19:12:57Z

Use platform_device_del() instead of platform_device_unregister() in error handling path. Signed-off-by: Axel Lin Acked-by: Liam Girdwood Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov

Input: wm9712 - fix wm97xx_set_gpio() logic

2010-05-19T17:13:35Z

WM97XX_GPIO_HIGH is not a bitmap and should to be treated as such. Signed-off-by: Dmitry Torokhov

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

2009-09-22T23:49:27Z

Conflicts: drivers/power/wm97xx_battery.c