kernel/drivers/input/touchscreen/elants_i2c.c, branch linux-4.16.y

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2018-02-01T18:49:58Z

Pull input layer updates from Dmitry Torokhov: - evdev interface has been adjusted to extend the life of timestamps on 32 bit systems to the year of 2108 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to improve chances of detecting trackpoints on the pass-through port - mms114 touchcsreen controller driver has been updated to support generic device properties and work with mms152 cntrollers - Goodix driver now supports generic touchscreen properties - couple of drivers for AVR32 architecture are gone as the architecture support has been removed from the kernel - gpio-tilt driver has been removed as there are no mainline users and the driver itself is using legacy APIs and relies on platform data - MODULE_LINECSE/MODULE_VERSION cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: goodix - use generic touchscreen_properties Input: mms114 - fix typo in definition Input: mms114 - use BIT() macro instead of explicit shifting Input: mms114 - replace mdelay with msleep Input: mms114 - add support for mms152 Input: mms114 - drop platform data and use generic APIs Input: mms114 - mark as direct input device Input: mms114 - do not clobber interrupt trigger Input: edt-ft5x06 - fix error handling for factory mode on non-M06 Input: stmfts - set IRQ_NOAUTOEN to the irq flag Input: auo-pixcir-ts - delete an unnecessary return statement Input: auo-pixcir-ts - remove custom log for a failed memory allocation Input: da9052_tsi - remove unused mutex Input: docs - use PROPERTY_ENTRY_U32() directly Input: synaptics-rmi4 - log when we create a guest serio port Input: synaptics-rmi4 - unmask F03 interrupts when port is opened Input: synaptics-rmi4 - do not delete interrupt memory too early Input: ad7877 - use managed resource allocations Input: stmfts,s6sy671 - add SPDX identifier Input: remove atmel-wm97xx touchscreen driver ...

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2018-02-01T18:00:28Z

Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...

Merge branch 'next' into for-linus

2018-02-01T08:37:30Z

Prepare input updates for 4.16 merge window.

Input: remove unneeded MODULE_VERSION() usage in touchscreen drivers

2018-01-17T00:48:23Z

MODULE_VERSION is useless for in-kernel drivers, so just remove all usage of it in the touchscreen drivers. Along with this, some DRV_VERSION macros were removed as they are also pointless. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Dmitry Torokhov

treewide: Use DEVICE_ATTR_WO

2018-01-09T15:34:35Z

Convert DEVICE_ATTR uses to DEVICE_ATTR_WO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*$\s*(\w+)\s*,\s*\(?(?:\s*S_IWUSR\s*|\s*0200\s*)$?\s*,\s*NULL\s*,\s*\s_store\s*\)/DEVICE_ATTR_WO(\1)/g; print;}' Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman

Input: elants_i2c - do not clobber interrupt trigger on x86

2017-11-30T06:52:51Z

This is similar to commit a4b0a58bb142 ("Input: elan_i2c - do not clobber interrupt trigger on x86") On x86 we historically used falling edge interrupts in the driver because that's how first Chrome devices were configured. They also did not use ACPI to enumerate I2C devices (because back then there was no kernel support for that), so trigger was hard-coded in the driver. However the controller behavior is much more reliable if we use level triggers, and that is how we configured ARM devices, and how want to configure newer x86 devices as well. All newer x86 boxes have their I2C devices enumerated in ACPI. Let's see if platform code (ACPI, DT) described interrupt and specified particular trigger type, and if so, let's use it instead of always clobbering trigger with IRQF_TRIGGER_FALLING. We will still use this trigger type as a fallback if platform code left interrupt trigger unconfigured. Reviewed-by: Guenter Roeck Signed-off-by: Dmitry Torokhov

Input: elants_i2c - use managed devm_device_add_group

2017-09-29T23:51:02Z

Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the action that cleans the sysfs file when exiting the driver. Signed-off-by: Andi Shyti Signed-off-by: Dmitry Torokhov

Input: elants_i2c - constify attribute_group structures

2017-07-12T21:19:30Z

attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9448 1008 0 10456 28d8 drivers/input/touchscreen/elants_i2c.o File size After adding 'const': text data bss dec hex filename 9496 944 0 10440 28c8 drivers/input/touchscreen/elants_i2c.o Signed-off-by: Arvind Yadav Signed-off-by: Dmitry Torokhov

Merge tag 'v4.10-rc5' into next

2017-01-24T20:37:43Z

Sync up with mainline to bring up improvements in various subsystems.

Input: touchscreen - drop unnecessary calls to input_set_drvdata

2017-01-23T01:22:31Z

Since there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck Signed-off-by: Dmitry Torokhov