kernel/drivers/input/serio, branch linux-4.1.y

Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list

2018-05-23T01:33:58Z

[ Upstream commit b56af54ac78c54a519d82813836f305d7f76ef27 ] Reset i8042 before probing because of insufficient BIOS initialisation of the i8042 serial controller. This makes Synaptics touchpad detection possible. Without resetting the Synaptics touchpad is not detected because there are always NACK messages from AUX port. Signed-off-by: Dennis Wassenberg Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list

2018-01-17T17:55:34Z

[ Upstream commit a4c2a13129f7c5bcf81704c06851601593303fd5 ] TUXEDO BU1406 does not implement active multiplexing mode properly, and takes around 550 ms in i8042_set_mux_mode(). Given that the device does not have external AUX port, there is no downside in disabling the MUX mode. Reported-by: Paul Menzel Suggested-by: Vojtech Pavlik Reviewed-by: Marcos Paulo de Souza Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - add Gigabyte P57 to the keyboard reset table

2017-10-04T01:36:51Z

[ Upstream commit 697c5d8a36768b36729533fb44622b35d56d6ad0 ] Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - fix crash at boot time

2017-09-10T20:35:43Z

[ Upstream commit 340d394a789518018f834ff70f7534fc463d3226 ] The driver checks port->exists twice in i8042_interrupt(), first when trying to assign temporary "serio" variable, and second time when deciding whether it should call serio_interrupt(). The value of port->exists may change between the 2 checks, and we may end up calling serio_interrupt() with a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [] _spin_lock_irqsave+0x1f/0x40 PGD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32-358.el6.x86_64 #1 QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:[] [] _spin_lock_irqsave+0x1f/0x40 RSP: 0018:ffff880028203cc0 EFLAGS: 00010082 RAX: 0000000000010000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000282 RSI: 0000000000000098 RDI: 0000000000000050 RBP: ffff880028203cc0 R08: ffff88013e79c000 R09: ffff880028203ee0 R10: 0000000000000298 R11: 0000000000000282 R12: 0000000000000050 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000098 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a85000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88013e79c000, task ffff88013e79b500) Stack: ffff880028203d00 ffffffff813de186 ffffffffffffff02 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000098 ffff880028203d70 ffffffff813e0162 ffff880028203d20 ffffffff8103b8ac Call Trace: [] serio_interrupt+0x36/0xa0 [] i8042_interrupt+0x132/0x3a0 [] ? kvm_clock_read+0x1c/0x20 [] ? kvm_clock_get_cycles+0x9/0x10 [] handle_IRQ_event+0x60/0x170 [] ? kvm_guest_apic_eoi_write+0x44/0x50 [] handle_edge_irq+0xde/0x180 [] handle_irq+0x49/0xa0 [] do_IRQ+0x6c/0xf0 [] ret_from_intr+0x0/0x11 [] ? __do_softirq+0x73/0x1e0 [] ? hrtimer_interrupt+0x14b/0x260 [] ? call_softirq+0x1c/0x30 [] ? do_softirq+0x65/0xa0 [] ? irq_exit+0x85/0x90 [] ? smp_apic_timer_interrupt+0x70/0x9b [] ? apic_timer_interrupt+0x13/0x20 To avoid the issue let's change the second check to test whether serio is NULL or not. Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of trying to be overly smart and using memory barriers. Signed-off-by: Chen Hong [dtor: take lock in i8042_start()/i8042_stop()] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

2017-07-31T17:37:47Z

[ Upstream commit 817ae460c784f32cd45e60b2b1b21378c3c6a847 ] Without this quirk, the touchpad is not responsive on this product, with the following message repeated in the logs: psmouse serio1: bad data from KBC - timeout Add it to the notimeout list alongside other similar Fujitsu laptops. Signed-off-by: Daniel Drake Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - add Clevo P650RS to the i8042 reset list

2017-05-17T19:08:24Z

[ Upstream commit 7c5bb4ac2b76d2a09256aec8a7d584bf3e2b0466 ] Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by: Paweł Bylica Tested-by: Ed Bordin Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301 Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000

2017-05-17T19:07:00Z

[ Upstream commit 45838660e34d90db8d4f7cbc8fd66e8aff79f4fe ] The aux port does not get detected without noloop quirk, so external PS/2 mouse cannot work as result. The PS/2 mouse can work with this quirk. BugLink: https://bugs.launchpad.net/bugs/1591053 Signed-off-by: Kai-Heng Feng Reviewed-by: Marcos Paulo de Souza Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - add XMG C504 to keyboard reset table

2016-11-26T03:57:01Z

[ Upstream commit da25311c7ca8b0254a686fc0d597075b9aa3b683 ] The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by: Patrick Scheuring Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

2016-08-31T23:21:09Z

[ Upstream commit 47af45d684b5f3ae000ad448db02ce4f13f73273 ] The commit 4097461897df ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 4097461897df ("Input: i8042 - break load dependency ...") Reported-by: Bruno Wolff III Tested-by: Bruno Wolff III Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: i8042 - break load dependency between atkbd/psmouse and i8042

2016-08-20T03:07:58Z

[ Upstream commit 4097461897df91041382ff6fcd2bfa7ee6b2448c ] As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by: Mark Laws Tested-by: Mark Laws Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin