Hosts the 0x221E linux distro kernel. https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-4.16.y 2018-06-16T07:43:42Z 2018-06-16T07:43:42Z Ethan Lee flibitijibibo@gmail.com 2018-06-01T18:46:08Z urn:sha1:67977d9b35c30aefc743ee39667f02ee387ace25 commit c1ba08390a8bb13c927e699330896adc15b78205 upstream. GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by: Ethan Lee <flibitijibibo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2018-02-01T18:49:58Z Linus Torvalds torvalds@linux-foundation.org 2018-02-01T18:49:58Z urn:sha1:eea43ed86f38347979446905a20792a8be7bf5d1 Pull input layer updates from Dmitry Torokhov: - evdev interface has been adjusted to extend the life of timestamps on 32 bit systems to the year of 2108 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to improve chances of detecting trackpoints on the pass-through port - mms114 touchcsreen controller driver has been updated to support generic device properties and work with mms152 cntrollers - Goodix driver now supports generic touchscreen properties - couple of drivers for AVR32 architecture are gone as the architecture support has been removed from the kernel - gpio-tilt driver has been removed as there are no mainline users and the driver itself is using legacy APIs and relies on platform data - MODULE_LINECSE/MODULE_VERSION cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: goodix - use generic touchscreen_properties Input: mms114 - fix typo in definition Input: mms114 - use BIT() macro instead of explicit shifting Input: mms114 - replace mdelay with msleep Input: mms114 - add support for mms152 Input: mms114 - drop platform data and use generic APIs Input: mms114 - mark as direct input device Input: mms114 - do not clobber interrupt trigger Input: edt-ft5x06 - fix error handling for factory mode on non-M06 Input: stmfts - set IRQ_NOAUTOEN to the irq flag Input: auo-pixcir-ts - delete an unnecessary return statement Input: auo-pixcir-ts - remove custom log for a failed memory allocation Input: da9052_tsi - remove unused mutex Input: docs - use PROPERTY_ENTRY_U32() directly Input: synaptics-rmi4 - log when we create a guest serio port Input: synaptics-rmi4 - unmask F03 interrupts when port is opened Input: synaptics-rmi4 - do not delete interrupt memory too early Input: ad7877 - use managed resource allocations Input: stmfts,s6sy671 - add SPDX identifier Input: remove atmel-wm97xx touchscreen driver ... 2018-02-01T08:37:30Z Dmitry Torokhov dmitry.torokhov@gmail.com 2018-02-01T08:37:30Z urn:sha1:d67ad78e09cbb9935c74a40b85c5abe5b9cd48f8 Prepare input updates for 4.16 merge window. 2018-01-26T01:30:47Z Linus Torvalds torvalds@linux-foundation.org 2018-01-26T01:30:47Z urn:sha1:993ca2068b043dc3c933a8a4fe1052b77fe63f10 Pull input fixes from Dmitry Torokhov: "The main item is that we try to better handle the newer trackpoints on Lenovo devices that are now being produced by Elan/ALPS/NXP and only implement a small subset of the original IBM trackpoint controls" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01" Input: trackpoint - only expose supported controls for Elan, ALPS and NXP Input: trackpoint - force 3 buttons if 0 button is reported Input: xpad - add support for PDP Xbox One controllers Input: stmfts,s6sy671 - add SPDX identifier 2018-01-22T19:33:40Z Mark Furneaux mark@furneaux.ca 2018-01-22T19:24:17Z urn:sha1:e5c9c6a885fad00aa559b49d8fc23a60e290824e Adds support for the current lineup of Xbox One controllers from PDP (Performance Designed Products). These controllers are very picky with their initialization sequence and require an additional 2 packets before they send any input reports. Signed-off-by: Mark Furneaux <mark@furneaux.ca> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2018-01-17T17:52:22Z Julia Lawall Julia.Lawall@lip6.fr 2018-01-17T00:56:54Z urn:sha1:698c03b4745006e14eccb8270f714d52fac1c97e Inline macro for MODULE_LICENSE to make the license information easy to find, eg with grep. Inline the other module-related macros at the same time. A simplified version of the semantic patch for the MODULE_LICENSE case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s@ identifier i; expression e; @@ @@ declarer name MODULE_LICENSE; identifier s.i; expression s.e; @@ MODULE_LICENSE( - i + e ); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [dtor: added a couple of drivers missed by the script, removed a few unused DRIVER_VERSION macros] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2018-01-06T00:45:06Z Linus Torvalds torvalds@linux-foundation.org 2018-01-06T00:45:06Z urn:sha1:65c64d1845fbc6420f8836e8731ea6c3012e8e7d Pull input fixes from Dmitry Torokhov: "Just a few driver fixups, nothing exciting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - do not advertise multi-touch pressure support Input: hideep - fix compile error due to missing include file Input: elants_i2c - do not clobber interrupt trigger on x86 Input: joystick/analog - riscv has get_cycles() Input: elantech - add new icbody type 15 Input: ims-pcu - fix typo in the error message 2017-11-30T06:52:02Z Olof Johansson olof@lixom.net 2017-11-30T06:48:11Z urn:sha1:da8df83957b179e5edc1029f637e5b69eff44967 Fixes: drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2017-11-21T23:57:07Z Kees Cook keescook@chromium.org 2017-10-16T21:43:17Z urn:sha1:e99e88a9d2b067465adaa9c111ada99a041bef9a This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org> 2017-11-10T18:29:55Z Gustavo A. R. Silva garsilva@embeddedor.com 2017-11-10T18:23:59Z urn:sha1:c1b433e04ef9c0a1c4d65bfe918472ffa334dff4 In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114761 Addresses-Coverity-ID: 114762 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>