kernel/drivers/infiniband, branch linux-5.1.y

IB/mlx5: Report correctly tag matching rendezvous capability

2019-07-26T07:13:04Z

commit 89705e92700170888236555fe91b45e4c1bb0985 upstream. Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: # 4.13 Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities") Signed-off-by: Danit Goldberg Reviewed-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

RDMA/srp: Accept again source addresses that do not have a port number

2019-07-26T07:13:03Z

commit bcef5b7215681250c4bf8961dfe15e9e4fef97d0 upstream. The function srp_parse_in() is used both for parsing source address specifications and for target address specifications. Target addresses must have a port number. Having to specify a port number for source addresses is inconvenient. Make sure that srp_parse_in() supports again parsing addresses with no port number. Cc: Fixes: c62adb7def71 ("IB/srp: Fix IPv6 address parsing") Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

ipoib: correcly show a VF hardware address

2019-07-26T07:12:37Z

[ Upstream commit 64d701c608fea362881e823b666327f5d28d7ffd ] in the case of IPoIB with SRIOV enabled hardware ip link show command incorrecly prints 0 instead of a VF hardware address. Before: 11: ib1: mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable, trust off, query_rss off ... After: 11: ib1: mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, link-state disable, trust off, query_rss off v1->v2: just copy an address without modifing ifla_vf_mac v2->v3: update the changelog Signed-off-by: Denis Kirjanov Acked-by: Doug Ledford Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

IB/hfi1: Handle port down properly in pio

2019-07-14T06:09:44Z

[ Upstream commit 942a899335707fc9cfc97cb382a60734b2ff4e03 ] The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/hfi1: Handle wakeup of orphaned QPs for pio

2019-07-14T06:09:44Z

[ Upstream commit 099a884ba4c00145cef283d36e050726311c2e95 ] Once a send context is taken down due to a link failure, any QPs waiting for pio credits will stay on the waitlist indefinitely. Fix by wakeing up all QPs linked to piowait list. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/hfi1: Wakeup QPs orphaned on wait list after flush

2019-07-14T06:09:44Z

[ Upstream commit f972775b1cc0441ae22c9f8d06dd16b118463632 ] Once an SDMA engine is taken down due to a link failure, any waiting QPs that do not have outstanding descriptors in the ring will stay on the dmawait list as long as the port is down. Since there is no timer running, they will stay there for a long time. The fix is to wake up all iowaits linked to dmawait. The send engine will build and post packets that get flushed back. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/hfi1: Use aborts to trigger RC throttling

2019-07-14T06:09:44Z

[ Upstream commit 4bb02e9572af1383038d83ad196d7166c515f2ee ] SDMA and pio flushes will cause a lot of packets to be transmitted after a link has gone down, using a lot of CPU to retransmit packets. Fix for RC QPs by recognizing the flush status and: - Forcing a timer start - Putting the QP into a "send one" mode Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/hfi1: Create inline to get extended headers

2019-07-14T06:09:44Z

[ Upstream commit 9755f72496664eec70bc804104118b5797b6bf63 ] This paves the way for another patch that reacts to a flush sdma completion for RC. Fixes: 81cd3891f021 ("IB/hfi1: Add support for 16B Management Packets") Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

RDMA: Directly cast the sockaddr union to sockaddr

2019-07-03T11:13:44Z

commit 641114d2af312d39ca9bbc2369d18a5823da51c6 upstream. gcc 9 now does allocation size tracking and thinks that passing the member of a union and then accessing beyond that member's bounds is an overflow. Instead of using the union member, use the entire union with a cast to get to the sockaddr. gcc will now know that the memory extends the full size of the union. Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

IB/hfi1: Validate page aligned for a given virtual address

2019-06-25T03:34:49Z

[ Upstream commit 97736f36dbebf2cda2799db3b54717ba5b388255 ] User applications can register memory regions for TID buffers that are not aligned on page boundaries. Hfi1 is expected to pin those pages in memory and cache the pages with mmu_rb. The rb tree will fail to insert pages that are not aligned correctly. Validate whether a given virtual address is page aligned before pinning. Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body") Reviewed-by: Michael J. Ruhl Signed-off-by: Kamenee Arumugam Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin