kernel/drivers/iio/trigger/iio-trig-sysfs.c, branch linux-6.9.y

Merge tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-11-25T17:35:16Z

Jonathan writes: 1st set of IIO new device support, feature and cleanup for 6.2 (take2) We have finally managed to take the mlock mutex entirely private so as to avoid it being used for multiple purposes. Now it is just used to protect device mode transitions (typically to and from buffered capture). Includes merge of an immutable i2c branch to get the new i2c_client_get_device_id() (thanks to Wolfram for providing the branch). Based on rc3 to pick up some precursor fixes from early in the cycle and avoid an unnecessarily messy history. New device support * adi,ad4310 - New driver to support this very flexible measurement device including a 24 bit ADC. Later fix for documentation build issue. * adi,adxl355 - Add support of the ADXL359 accelerometer. * adi,ltc2983 - Support additional variants of the temperatures sensor: LTC2984 with an EEPROM LTC2985, LTC2986 with only 10 channels. * invensense,icm42600 - Add support for icm42631 (needed only ID and WHOAMI) * kionix,kx022a - New driver for this 3 axis accelerometer. * maxim,max11401 - New driver to support this 24-bit 10 channel ADC. Includes some new ABI to support configuration of notch filters. * mediatek,mt6370 - Add new driver to support the ADC part of the mt6370. * st,lsm6dsx - Add support for LSM6DSV accelerometer and gyroscope. Simple additional of chip specific data and IDs. - Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with features currently implemented for the LSM6DSV. * st,stm32-adc - Add support for stm32pm13x SoCs. core / subsystem wide: - Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to allow for the wrapping of attributes in the code that duplicates them for multiple buffers. - Harden against future issues with expectation that all buffer attributes are iio_dev_attrs by changing the code to take an array of pointers of the correct type. - Last transitions of drivers to local locks rather than missuses of mlock. - Add an iio_device_claim_buffer_mode() callback to avoid a race in the max30100 driver without directly using mlock. - Move mlock to the opaque IIO device structure to prevent misuse. - Add missing spi_device_id tables to support auto loading of modules. - Update some ADI maintainers in DT bindings. - A few more moves of bus drivers and core module sets to export name spaces. - Extensive use of new devm_regulator_get_enable() and friends. - Switch a bunch of i2c drivers to probe_new() including the bmp280 which makes use of the new i2c_client_get_device_id() helper to simplify this change. dt-bindings: - More use of spi-peripheral-props.yaml. Features * freescale,mpl115 - Use runtime PM to implement shutdown GPIO support. * melexis,mlx90632 - More sophisticated runtime power management - Provide access to sampling frequency. - Trivial follow up fixes. * microchip,mcp3911 - Support control of PGA. * st,lsm6dsx - Add support for software triggers for cases where the IRQ lines are not wired up. * vishay,vcnl4000 - Add control of integration time. Minor cleanups and fixes * adi,ad4130 - Improve ABI documentation formatting. - Kconfig dependency fixup. * adi,ad5758 - Minor dt binding fix. * adi,ad9834 - Tidy up line breaks. * adi,ade7854 - Minor improvement in code clarity by replacing a ternary. * adi,admv8818 - Harden code against hardware returning wrong values. * adi,adxl355 - Warn only if unknown device ID detected to allow for fall back device tree compatibles on future devices. * adi,ltc2983 - dt-bindings clarifications and general improvements. - Ensure DMA safe buffer for bulk writes without relying on current regmap implementation choices. * avago,adps9960 - Fix up a disconnect between event enable attributes and what was enabled. * bosch,bma400 - Switch to dev_err_probe() from open coded EPROBE_DEFER handling. * cosmic,cc10001 - Fully devm managed probe() and related tidying up. * meas,ms5611 - Add an example of spi-max-frequency. * meleixs,mlx90632 - Tidy up confusing error return value. - Style improvements. * multiplexer - Switch to dev_err_probe() from open coded EPROBE_DEFER handling. * qcom,spmi-vadc - Minor dt binding improvements. * rockchip,saradc - Add ID for rv1126. * semtech,sx9360 - Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix but is in the wild. * st,lsm6dsx - Factor out common code as _device_set_enable(). - Fix up wrong docs after LSM6DSV addition. * st,stm32-adc - Manage the min sampling time on all internal channels. * trig,sysfs - Improve error labels. * tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits) iio: pressure: bmp280: convert to i2c's .probe_new() iio: imu: st_lsm6dsx: fix LSM6DSV sensor description iio: adc: ad4130: depend on GPIOLIB staging: iio: meter: replace ternary operator by if condition iio: light: apds9960: Fix iio_event_spec structures dt-bindings: iio: imu: Add inv_icm42600 documentation iio: imu: inv_icm42600: Add support for icm42631 dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126 dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode' dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x iio: imu: st_lsm6dsx: add support to LSM6DSV16X iio: proximity: sx9360: Add a new ACPI hardware ID iio: temperature: mlx90632: Add missing static marking on devm_pm_ops iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable() iio: temperature: ltc2983: support more parts dt-bindings: iio: temperature: ltc2983: support more parts dt-bindings: iio: temperature: ltc2983: use generic node name in example dt-bindings: iio: temperature: ltc2983: describe broken mux delay property dt-bindings: iio: temperature: ltc2983: refine descriptions dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors ...

iio: trigger: sysfs: rename error label in iio_sysfs_trigger_probe()

2022-11-23T19:44:03Z

Rename error label in iio_sysfs_trigger_probe() to make more readable. Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221024105250.873394-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron

iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()

2022-10-24T17:48:57Z

dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70 Fixes: 1f785681a870 ("staging:iio:trigger sysfs userspace trigger rework.") Signed-off-by: Yang Yingliang Cc: Link: https://lore.kernel.org/r/20221022074212.1386424-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron

Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-06-20T07:49:52Z

Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...

iio: trigger: sysfs: fix use-after-free on remove

2022-06-19T16:22:48Z

Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== Fixes: f38bc926d022 ("staging:iio:sysfs-trigger: Use irq_work to properly active trigger") Signed-off-by: Vincent Whitchurch Reviewed-by: Lars-Peter Clausen Link: https://lore.kernel.org/r/20220519091925.1053897-1-vincent.whitchurch@axis.com Cc: Signed-off-by: Jonathan Cameron

iio: sysfs-trigger: replace usage of found with dedicated list iterator variable

2022-04-04T08:11:25Z

To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20220331230632.957634-3-jakobkoschel@gmail.com Signed-off-by: Jonathan Cameron

iio: sysfs-trigger: Remove no-op trigger ops

2021-11-17T17:51:36Z

The IIO core handles a trigger ops with all NULL callbacks the same as if the trigger ops itself was NULL. Remove the empty trigger ops from the interrupt trigger driver to slightly reduce the boilerplate code. Object size of the driver module is also slightly reduced. Signed-off-by: Lars-Peter Clausen Link: https://lore.kernel.org/r/20211031142130.20791-2-lars@metafoo.de Signed-off-by: Jonathan Cameron

iio: set default trig->dev.parent

2021-03-25T19:13:50Z

When allocated with [devm_]iio_trigger_alloc(), set trig device parent to the device the trigger is allocated for by default. It can always be reassigned in the probe routine. Change iio_trigger_alloc() API to add the device pointer to be coherent with devm_iio_trigger_alloc, using similar interface to iio_device_alloc(). Signed-off-by: Gwendal Grignou Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210309193620.2176163-2-gwendal@chromium.org Signed-off-by: Jonathan Cameron

Merge tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2020-12-15T22:18:40Z

Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...

iio: sysfs-trigger: Mark irq_work to expire in hardirq context

2020-12-03T19:40:30Z

Mark the IIO sysfs-trigger irq_work with IRQ_WORK_HARD_IRQ to ensure that it is always executed in hard interrupt context, even with PREEMPT_RT=y. The IIO sysfs-trigger irq_work needs to run in hard interrupt context since it will end up calling generic_handle_irq() which has the requirement to run in hard interrupt context. Note that the IRQ_WORK_HARD_IRQ flag, while it exists, does not seem to do anything in the mainline kernel yet. It does have an effect in the RT patchset though and presumably this is sooner or later going to be added to mainline as well. Reported-by: Christian Eggers Signed-off-by: Lars-Peter Clausen Acked-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20201117103751.16131-2-lars@metafoo.de Signed-off-by: Jonathan Cameron