kernel/drivers/iio/temperature, branch linux-5.1.y

iio: temperature: mlx90632 Relax the compatibility check

2019-06-25T03:34:45Z

commit 389fc70b60f534d679aea9a3f05146040ce20d77 upstream. Register EE_VERSION contains mixture of calibration information and DSP version. So far, because calibrations were definite, the driver compatibility depended on whole contents, but in the newer production process the calibration part changes. Because of that, value in EE_VERSION will be changed and to avoid that calibration value is same as DSP version the MSB in calibration part was fixed to 1. That means existing calibrations (medical and consumer) will now have hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility should be based only on DSP version part of the EE_VERSION (bits 0 to 7) register. Signed-off-by: Crt Mori Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers

2018-11-16T11:42:12Z

Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede Acked-by: Srinivas Pandruvada Acked-by: Benjamin Tissoires Cc: Signed-off-by: Jonathan Cameron

Merge remote-tracking branches 'regmap/topic/noinc' and 'regmap/topic/single-rw' into regmap-next

2018-10-21T11:07:26Z

Merge tag 'iio-fixes-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2018-09-09T07:33:29Z

Jonathan writes: First set of IIO fixes for the 4.19 cycle. * ad9523 - sysfs write should return the number of characters used or an error, not 0 which could result in an infinite loop in userspace. * lsm6dsx - Fix computation of length when updating the watermark to include timestamps avoiding the watermark being set earlier than intended. * maxim_thermocouple - Revert a patch adding the max31856 as it's not actually compatible with the register set that this driver supports. * si1133 - Fix an impossible value check so we don't always error out whether the passed in value is good or bad.

regmap: split up regmap_config.use_single_rw

2018-09-07T12:03:55Z

Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey Signed-off-by: Mark Brown

Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"

2018-09-02T09:13:06Z

This reverts commit 535fba29b3e1afef4ba201b3c69a6992583ec0bd. Seems the submitter (er me, hang head in shame) didn't look at the datasheet enough to see that the registers are quite different. This needs to be reverted because a) would never work b) to open it be added to a Maxim RTDs (Resistance Temperature Detectors) under development by author Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron

i2c: remove i2c_lock_adapter and use i2c_lock_bus directly

2018-07-12T22:09:37Z

The i2c_lock_adapter name is ambiguous since it is unclear if it refers to the root adapter or the adapter you name in the argument. The natural interpretation is the adapter you name in the argument, but there are historical reasons for that not being the case; it in fact locks the root adapter. Just remove the function and force users to spell out the I2C_LOCK_ROOT_ADAPTER name to indicate what is really going on. Also remove i2c_unlock_adapter, of course. This patch was generated with git grep -l 'i2c_\(un\)\?lock_adapter' \ | xargs sed -i 's/i2c_\(un\)\?lock_adapter(\([^)]*\))/'\ 'i2c_\1lock_bus(\2, I2C_LOCK_ROOT_ADAPTER)/g' followed by white-space touch-up. Signed-off-by: Peter Rosin Acked-by: Jonathan Cameron Tested-by: Sekhar Nori Signed-off-by: Wolfram Sang

iio temperature/mlx90632: silence a static checker warning

2018-02-24T13:32:05Z

This shouldn't affect runtime at all, but Smatch complains that we should check if mlx90632_read_ambient_raw() otherwise we "ambient_new_raw" can be uninitialized. drivers/iio/temperature/mlx90632.c:509 mlx90632_calc_ambient_dsp105() error: uninitialized symbol 'ambient_new_raw'. Signed-off-by: Dan Carpenter Acked-by: Crt Mori Signed-off-by: Jonathan Cameron

iio: add SPDX identifier for various drivers

2018-02-18T11:55:19Z

Add GPLv2+ SPDX identifier and update email for author's drivers. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron

iio: temperature: Adding support for MLX90632

2018-02-04T10:21:48Z

Melexis has just released Infra Red temperature sensor MLX90632 used for contact-less temperature measurement. Driver provides basic functionality for reporting object (and ambient) temperature with support for object emissivity. Signed-off-by: Crt Mori Signed-off-by: Jonathan Cameron