kernel/drivers/iio/temperature/Kconfig, branch linux-6.9.y

iio: temperature: mlx90635 MLX90635 IR Temperature sensor

2023-12-11T19:16:34Z

MLX90635 is an Infra Red contactless temperature sensor most suitable for consumer applications where measured object temperature is in range between -20 to 100 degrees Celsius. It has improved accuracy for measurements within temperature range of human body and can operate in ambient temperature range between -20 to 85 degrees Celsius. Driver provides simple power management possibility as it returns to lowest possible power mode (Step sleep mode) in which temperature measurements can still be performed, yet for continuous measuring it switches to Continuous power mode where measurements constantly change without triggering. Signed-off-by: Crt Mori Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com Signed-off-by: Jonathan Cameron

iio: temperature: Add MCP9600 thermocouple EMF converter

2023-11-16T19:10:28Z

Add support for the MCP9600 thermocouple electromotive force converter. The sensor has integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf Signed-off-by: Andrew Hepp Link: https://lore.kernel.org/r/20231025233153.5454-2-andrew.hepp@ahepp.dev Signed-off-by: Jonathan Cameron

iio: temperature: Add driver support for Maxim MAX30208

2022-11-23T20:20:32Z

Maxim MAX30208 is a digital temperature sensor with 0.1°C accuracy. Add support for max30208 driver in iio subsystem. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30208.pdf Signed-off-by: Rajat Khandelwal Link: https://lore.kernel.org/r/20221122175300.800956-1-rajat.khandelwal@linux.intel.com Signed-off-by: Jonathan Cameron

iio: temperature: Add MAX31865 RTD Support

2021-09-14T11:00:33Z

This patch adds support for Maxim MAX31865 RTD temperature sensor support. More information can be found in: https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf Signed-off-by: Navin Sankar Velliangiri Link: https://lore.kernel.org/r/20210824050123.71289-1-navin@linumiz.com Signed-off-by: Jonathan Cameron

iio: temperature: add driver support for ti tmp117

2021-05-17T12:49:05Z

TMP117 is a Digital temperature sensor with integrated Non-Volatile memory. Add support for tmp117 driver in iio subsystem. Datasheet: https://www.ti.com/lit/gpn/tmp117 Signed-off-by: Puranjay Mohan Reviewed-by: Andy Shevchenko Reviewed-by: Lars-Peter Clausen Link: https://lore.kernel.org/r/20210407182147.77221-3-puranjay12@gmail.com Signed-off-by: Jonathan Cameron

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

2021-05-10T13:01:48Z

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann Cc: Srinivas Pandruvada Signed-off-by: Alexandru Ardelean Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron

iio: temperature: Add support for Azoteq IQS620AT temperature sensor

2020-03-27T08:25:50Z

This patch adds support for the Azoteq IQS620AT temperature sensor, capable of reporting its absolute die temperature. Signed-off-by: Jeff LaBundy Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones

iio: temperature: Add support for LTC2983

2019-10-22T10:34:19Z

The LTC2983 is a Multi-Sensor High Accuracy Digital Temperature Measurement System. It measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution. It can measure the temperature of all standard thermocouples (type B,E,J,K,N,S,R,T), standard 2-,3-,4-wire RTDs, thermistors and diodes. Signed-off-by: Nuno Sá Signed-off-by: Jonathan Cameron

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

iio:temperature: Add MAX31856 thermocouple support

2019-04-04T19:21:05Z

This patch adds support for Maxim MAX31856 thermocouple temperature sensor support. More information can be found in: https://www.maximintegrated.com/en/ds/MAX31856.pdf NOTE: Driver support only Comparator Mode. Signed-off-by: Paresh Chaudhary Signed-off-by: Matt Weber Signed-off-by: Patrick Havelange Signed-off-by: Jonathan Cameron