kernel/drivers/iio/magnetometer, branch linux-5.1.y

iio: hmc5843: fix potential NULL pointer dereferences

2019-05-31T13:43:38Z

[ Upstream commit 536cc27deade8f1ec3c1beefa60d5fbe0f6fcb28 ] devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by: Kangjie Lu Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: magnetometer: mag3110: add vdd/vddio regulator operation support

2019-01-12T19:00:23Z

The magnetometer's power supplies could be controllable on some platforms, such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled by a GPIO fixed regulator, need to make sure the regulators are enabled before any communication with mag3110, this patch adds vdd/vddio regulator operation support. Signed-off-by: Anson Huang Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2018-12-13T12:37:24Z

Jonathan writes: Second set of IIO new device support, features and cleanups for the 4.21 cycle. Staging graduation * ad2s90 - Driver for this resolver to digital chip. New drivers and device support. * ad5686 - Add support for ad5310r DAC and associated fix in value read back. * exynos-adc - Support for S5PV210 which is slightly different from other parts. * mcp41010 - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and MCP42100 microchip potentiometers. New ACPI ids. * ak8975 - AKM9911 ACPI HID. * kxcjk-1013 - KXJ2109 ACPI HID. - KIOX010A ACPI HID. New features * ad5933 - Explicit DT binding. * ad2s90 - Explicit DT binding including dropping spi setup that is done via dt in favour of verifying the settings form DT. * adt7316 - Explicit DT binding and support for gpio, irq_flags etc. * stm32-adc - Runtime power management. Minor fixes and cleanups * core - Protect against missing info structure. * ad2s90 - SPDX - Add documentation fo the mutex. * ad7280a - Check allocation failure. - Fix an accidental replacement of an error return. * adt7316 - Switch some variables to be local and rename for consistency with other drivers. - Revert a false handling of 0 as an error introduced earlier this cycle. * bmi160 - Use devm functions throughout probe() to avoid need for remove(). * hid-sensor-hub - White space cleanup. * hts221 - MAINTAINERS entry. * lis302 - Use generic name in the DT binding doc. * Messon-saradc - Check for allocation error. - Fix some presented clock names that break clk debugfs. * qcom-spmi-adc - A fix for initialization of the prescale property. Came late in the cycle, so merge window is probably the best route for this. * st_lsm6dsx - Allow for variable read length to support wider range of slave devices. * tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits) iio: adc: qcom-spmi-adc5: Initialize prescale properly dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant iio: adc: Allow selection of Exynos ADC on S5PV210 iio: adc: exynos-adc: Add S5PV210 variant iio: bmi160: use all devm functions in probe iio: dac: ad5686: fix bit shift read register iio:dac:ad5686: Add AD5310R support Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0" dt-bindings: iio: accel: use a generic node name for lis302 iio: core: check 'info' value before registering the device staging: iio: adc: ad7280a: fix overwrite of the returned value staging: iio: adc: ad7280a: check for devm_kasprint() failure iio: humidity: hts221: add entry in MAINTAINERS file iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID staging:iio:ad2s90: Move out of staging staging:iio:ad2s90: Add comment to device state mutex staging:iio:ad2s90: Replace license text w/ SPDX identifier dt-bindings:iio:resolver: Add docs for ad2s90 staging:iio:ad2s90: Add max frequency check at probe staging:iio:ad2s90: Remove spi setup that should be done via dt ...

Merge 4.20-rc5 into staging-next

2018-12-03T06:55:28Z

We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman

iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID

2018-12-01T16:05:56Z

This HID is used on the ASUS MeMO Pad 7 (ME176C) tablet. Signed-off-by: Stephan Gerhold Signed-off-by: Jonathan Cameron

iio: magnetometer: Add driver support for PNI RM3100

2018-11-16T18:32:31Z

PNI RM3100 is a high resolution, large signal immunity magnetometer, composed of 3 single sensors and a processing chip with a MagI2C interface. Following functions are available: - Single-shot measurement from /sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw - Triggerd buffer measurement. - DRDY pin for data ready trigger. - Both i2c and spi interface are supported. - Both interrupt and polling measurement is supported, depends on if the 'interrupts' in DT is declared. Signed-off-by: Song Qiang Signed-off-by: Jonathan Cameron

iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers

2018-11-16T11:42:12Z

Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede Acked-by: Srinivas Pandruvada Acked-by: Benjamin Tissoires Cc: Signed-off-by: Jonathan Cameron

iio:magnetometer: st_magn: add BDU settings

2018-11-11T15:29:43Z

LIS3MDL and LSM9DS1 are missing BDU settings in their register maps, so add them. I don't have a LIS3MDL sensor to test, but this works correctly on the LSM9DS1, which has the same register map. Signed-off-by: Martin Kelly Signed-off-by: Jonathan Cameron

iio:magnetometer: st_magn: add LSM9DS1 support

2018-11-11T15:29:43Z

Update the sensor settings to support the LSM9DS1 sensor. Although the LSM9DS1 accelerometer and gyroscope are coupled together to use the same FIFO, the magnetometer is separate and can be cleanly supported without refactoring the existing driver. Signed-off-by: Martin Kelly Signed-off-by: Jonathan Cameron

iio: magnetometer: add clarifying comment

2018-11-11T15:29:42Z

Add a comment clarifying better when to use vs -magn in compatibility strings. Signed-off-by: Martin Kelly Signed-off-by: Jonathan Cameron