kernel/drivers/iio/light/apds9960.c, branch linux-6.9.y

iio: Switch i2c drivers back to use .probe()

2023-05-21T17:54:53Z

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron

Merge tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-11-27T14:05:05Z

Jonathan writes: 4th set of IIO fixes for 6.1 Single patch fixing a memory leak in an error path. Fine to queue either for 6.2 if too late for 6.1 * tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: fix memory leak in iio_device_register_eventset() dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid" iio: adc: aspeed: Remove the trim valid dts property. iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails iio: accel: bma400: Fix memory leak in bma400_get_steps_reg() iio: light: rpr0521: add missing Kconfig dependencies iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw iio: health: afe4403: Fix oob read in afe4403_read_raw iio: light: apds9960: fix wrong register for gesture gain

iio: light: apds9960: Convert to i2c's .probe_new()

2022-11-23T20:20:27Z

The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König Acked-by: Matt Ranostay Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20221118224540.619276-118-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron

iio: light: apds9960: Fix iio_event_spec structures

2022-11-23T19:58:45Z

There is only one interrupt enable option for both ALS low and high thresholds, and one for both Proximity low and high thresholds. Signed-off-by: Subhajit Ghosh Reviewed-by: Matt Ranostay Link: https://lore.kernel.org/r/20221110101241.10576-1-subhajit.ghosh@vixtechnology.com Signed-off-by: Jonathan Cameron

iio: light: apds9960: fix wrong register for gesture gain

2022-11-06T17:33:48Z

Gesture Gain Control is in REG_GCONF_2 (0xa3), not in REG_CONFIG_2 (0x90). Fixes: aff268cd532e ("iio: light: add APDS9960 ALS + promixity driver") Signed-off-by: Alejandro Concepcion-Rodriguez Acked-by: Matt Ranostay Cc: Link: https://lore.kernel.org/r/EaT-NKC-H4DNX5z4Lg9B6IWPD5TrTrYBr5DYB784wfDKQkTmzPXkoYqyUOrOgJH-xvTsEkFLcVkeAPZRUODEFI5dGziaWXwjpfBNLeNGfNc=@acoro.eu Signed-off-by: Jonathan Cameron

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

iio: core: Simplify the registration of kfifo buffers

2022-04-10T15:25:46Z

Among all the users of the kfifo buffers, no one uses the INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and simplify a little bit the internals - overall the documentation - by eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by default with kfifo buffers, which will basically mimic what all the "non direct" modes do. Cc: Benson Leung Cc: Guenter Roeck Cc: Jyoti Bhayana Cc: Jean-Baptiste Maneyrol Cc: Lorenzo Bianconi Cc: Michael Hennerich Cc: Greg Kroah-Hartman Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron

iio: make use of devm_iio_kfifo_buffer_setup() helper

2021-03-11T20:47:01Z

All drivers that already call devm_iio_kfifo_allocate() & iio_device_attach_buffer() are simple to convert to iio_device_attach_kfifo_buffer() in a single go. This change does that; the unwind order is preserved. What is important, is that the devm_iio_kfifo_buffer_setup() be called after the indio_dev->modes is assigned, to make sure that INDIO_BUFFER_SOFTWARE flag is set and not overridden by the assignment to indio_dev->modes. Also, the INDIO_BUFFER_SOFTWARE has been removed from the assignments of 'indio_dev->modes' because it is set by devm_iio_kfifo_buffer_setup(). Signed-off-by: Alexandru Ardelean Reviewed-by: Gwendal Grignou Reviewed-by: Matt Ranostay x Link: https://lore.kernel.org/r/20210215104043.91251-4-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio:light:apds9960 add detection for MSHW0184 ACPI device in apds9960 driver

2021-01-09T21:52:45Z

The device is used in the Microsoft Surface Book 3 and Surface Pro 7 Signed-off-by: Max Leiter Reviewed-by: Matt Ranostay Link: https://lore.kernel.org/r/20201220015057.107246-1-maxwell.leiter@gmail.com Signed-off-by: Jonathan Cameron

iio: light: apds9960: remove unneeded semicolon

2020-10-31T15:02:35Z

A semicolon is not needed after a switch statement. Signed-off-by: Tom Rix Acked-by: Matt Ranostay Link: https://lore.kernel.org/r/20201027201436.1597726-1-trix@redhat.com Signed-off-by: Jonathan Cameron