kernel/drivers/iio/buffer/industrialio-triggered-buffer.c, branch linux-6.9.y

iio: triggered-buffer: prevent possible freeing of wrong buffer

2023-11-26T17:17:04Z

Commit ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") introduced support for multiple buffers per indio_dev but left indio_dev->buffer for a few legacy use cases. In the case of the triggered buffer, iio_triggered_buffer_cleanup() still assumes that indio_dev->buffer points to the buffer allocated by iio_triggered_buffer_setup_ext(). However, since iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer() to attach the buffer, indio_dev->buffer will only point to the buffer allocated by iio_device_attach_buffer() if it the first buffer attached. This adds a check to make sure that no other buffer has been attached yet to ensure that indio_dev->buffer will be assigned when iio_device_attach_buffer() is called. As per discussion in the review thread, we may want to deal with multiple triggers per device, but this is a fix for the issue in the meantime and any such support would be unlikely to be suitable for a backport. Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") Signed-off-by: David Lechner Acked-by: Nuno Sa Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com Cc: Signed-off-by: Jonathan Cameron

iio: Don't silently expect attribute types

2022-11-23T19:44:04Z

The iio_triggered_buffer_setup_ext() and the devm_iio_kfifo_buffer_setup_ext() were changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). When using IIO_CONST_ATTRs the added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the function signatures to expect an array of iio_dev_attrs to avoid similar errors in the future. Merge conflict resolved whilst applying due to patch crossing with two new drivers (kx022a accelerometer and ad4130 ADC). Signed-off-by: Matti Vaittinen Tested-by: Claudiu Beznea Link: https://lore.kernel.org/r/63f54787a684eb1232f1c5d275a09c786987fe4a.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron

iio: triggered-buffer: extend support to configure output buffers

2021-10-19T07:30:45Z

Now that output (kfifo) buffers are supported, we need to extend the {devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction parameter. This allows us to attach an output triggered buffer to a DAC device. Unfortunately it's a bit difficult to add another macro to avoid changing 5 drivers where {devm_}iio_triggered_buffer_setup_ext() is used. Well, it's doable, but may not be worth the trouble vs just updating all these 5 drivers. Signed-off-by: Alexandru Ardelean Signed-off-by: Mihail Chindris Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com Signed-off-by: Jonathan Cameron

iio: core: move @id from struct iio_dev to struct iio_dev_opaque

2021-05-17T12:49:13Z

Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org

iio: triggered-buffer: simplify devm_iio_triggered_buffer_setup_ext()

2021-05-17T12:49:07Z

Use devm_add_action_or_reset() instead of devres_alloc() and devres_add(), which works the same. This will simplify the code. There is no functional changes. Signed-off-by: Yicong Yang Reviewed-by: Lars-Peter Clausen Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/1617881896-3164-5-git-send-email-yangyicong@hisilicon.com Signed-off-by: Jonathan Cameron

iio: buffer: introduce support for attaching more IIO buffers

2021-03-11T20:47:05Z

With this change, calling iio_device_attach_buffer() will actually attach more buffers. Right now this doesn't do any validation of whether a buffer is attached twice; maybe that can be added later (if needed). Attaching a buffer more than once should yield noticeably bad results. The first buffer is the legacy buffer, so a reference is kept to it. At this point, accessing the data for the extra buffers (that are added after the first one) isn't possible yet. The iio_device_attach_buffer() is also changed to return an error code, which for now is -ENOMEM if the array could not be realloc-ed for more buffers. To adapt to this new change iio_device_attach_buffer() is called last in all place where it's called. The realloc failure is a bit difficult to handle during un-managed calls when unwinding, so it's better to have this as the last error in the setup_buffer calls. At this point, no driver should call iio_device_attach_buffer() directly, it should call one of the {devm_}iio_triggered_buffer_setup() or devm_iio_kfifo_buffer_setup() or devm_iio_dmaengine_buffer_setup() functions. This makes iio_device_attach_buffer() a bit easier to handle. Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210215104043.91251-20-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: triggered-buffer: add {devm_}iio_triggered_buffer_setup_ext variants

2020-11-21T14:53:09Z

This change adds a parameter to the {devm_}iio_triggered_buffer_setup() functions to assign the extra sysfs buffer attributes that are typically assigned via iio_buffer_set_attrs(). The functions also get renamed to iio_triggered_buffer_setup_ext() & devm_iio_triggered_buffer_setup_ext(). For backwards compatibility the old {devm_}iio_triggered_buffer_setup() functions are now macros wrap the new (renamed) functions with NULL for the buffer attrs. The aim is to remove iio_buffer_set_attrs(), so in the iio_triggered_buffer_setup_ext() function the attributes are assigned directly to 'buffer->attrs'. When adding multiple IIO buffers per IIO device, it can be pretty cumbersome to first allocate a set of buffers, then to dig them out of IIO to assign extra attributes (with iio_buffer_set_attrs()). Naturally, the best way would be to provide them at allocation time, which is what this change does. At this moment, buffers allocated with {devm_}iio_triggered_buffer_setup() are the only ones in mainline IIO to call iio_buffer_set_attrs(). Signed-off-by: Alexandru Ardelean Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200929125949.69934-4-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: Move attach/detach of the poll func to the core

2020-06-20T16:34:44Z

All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Tested-by: Eugen Hristev #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron

iio: core: drop devm_iio_triggered_buffer_cleanup() API call

2020-04-19T15:56:35Z

It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman