kernel/drivers/iio/accel, branch linux-6.9.y

iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF

2024-07-05T07:38:07Z

commit a821d7111e3f7c8869961b606714a299bfe20014 upstream. Provide missing symbols to the module: ERROR: modpost: iio_push_to_buffers [drivers/iio/accel/fxls8962af-core.ko] undefined! ERROR: modpost: devm_iio_kfifo_buffer_setup_ext [drivers/iio/accel/fxls8962af-core.ko] undefined! Cc: stable@vger.kernel.org Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling") Signed-off-by: Alexander Sverdlin Reviewed-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20240605203810.2908980-2-alexander.sverdlin@siemens.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: mxc4005: Reset chip on probe() and resume()

2024-03-28T13:05:46Z

On some designs the chip is not properly reset when powered up at boot or after a suspend/resume cycle. Use the sw-reset feature to ensure that the chip is in a clean state after probe() / resume() and in the case of resume() restore the settings (scale, trigger-enabled). Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218578 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240326113700.56725-3-hdegoede@redhat.com Cc: Signed-off-by: Jonathan Cameron

iio: accel: mxc4005: Interrupt handling fixes

2024-03-28T13:00:48Z

There are 2 issues with interrupt handling in the mxc4005 driver: 1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE (0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables all other interrupt sources in the INT_SRC1 register. On the MXC4005 this is not an issue because only bit 0 of the register is used. On the MXC6655 OTOH this is a problem since bit7 is used as TC (Temperature Compensation) disable bit and writing 1 to this disables Temperature Compensation which should only be done when running self-tests on the chip. Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable the interrupts to fix this. 2. The datasheets for the MXC4005 / MXC6655 do not state what the reset value for the INT_MASK0 and INT_MASK1 registers is and since these are write only we also cannot learn this from the hw. Presumably the reset value for both is all 0, which means all interrupts disabled. Explicitly set both registers to 0 from mxc4005_chip_init() to ensure both masks are actually set to 0. Fixes: 79846e33aac1 ("iio: accel: mxc4005: add support for mxc6655") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com Cc: Signed-off-by: Jonathan Cameron

Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-03-21T20:21:31Z

Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...

iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.

2024-02-28T19:26:35Z

Implement kxj_acpi_orientation to retrieve mount matrix from ACPI ROTM method Cc: Jonathan Cameron Cc: Lars-Peter Clausen Cc: "Uwe Kleine-König" Signed-off-by: Sean Rhodes Link: https://lore.kernel.org/r/19d7a10aae5238a2c8db37da1f74edb86480e17e.1708293140.git.sean@starlabs.systems Signed-off-by: Jonathan Cameron

iio: accel: kxsd9: Switch from linux/of.h to linux/mod_devicetable.h

2024-02-28T19:26:35Z

The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-8-jic23@kernel.org Signed-off-by: Jonathan Cameron

iio: accel: bma180: Switch from linux/of.h to linux/mod_devicetable.h

2024-02-28T19:26:35Z

iio: accel: adxl372: Switch from linux/of.h to linux/mod_devicetable.h

2024-02-28T19:26:35Z

iio: accel: adxl367: fix I2C FIFO data register

2024-02-25T14:31:14Z

As specified in the datasheet, the I2C FIFO data register is 0x18, not 0x42. 0x42 was used by mistake when adapting the ADXL372 driver. Fix this mistake. Fixes: cbab791c5e2a ("iio: accel: add ADXL367 driver") Signed-off-by: Cosmin Tanislav Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240207033657.206171-2-demonsingur@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio: accel: adxl367: fix DEVID read after reset

2024-02-25T14:30:45Z

regmap_read_poll_timeout() will not sleep before reading, causing the first read to return -ENXIO on I2C, since the chip does not respond to it while it is being reset. The datasheet specifies that a soft reset operation has a latency of 7.5ms. Add a 15ms sleep between reset and reading the DEVID register, and switch to a simple regmap_read() call. Fixes: cbab791c5e2a ("iio: accel: add ADXL367 driver") Signed-off-by: Cosmin Tanislav Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240207033657.206171-1-demonsingur@gmail.com Cc: Signed-off-by: Jonathan Cameron