kernel/drivers/ide/macide.c, branch linux-6.9.y

m68k/mac: Replace macide driver with generic platform drivers

2021-06-10T22:30:11Z

This allows m68k mac systems to switch from the deprecated IDE subsystem to libata. This was tested on my Quadra 630. I haven't tested it on my PowerBook 150 because I don't have a RAM adapter board for it. It appears that the hardware I tested doesn't need macide_clear_irq() or macide_test_irq(). If it did, the generic driver would not have worked. It's possible that those routines are needed for the PowerBook 150 but we can cross that bridge if and when we come to it. BTW, macide_clear_irq() appears to suffer from a race condition. The write to the interrupt flags register could have unintended side effects as it may alter other flag bits. Fortunately, all of the other bits are unused by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20 was observed to have no effect on bit 5, so it may be redundant anyway. Cc: Michael Schmitz Cc: Joshua Thompson Reviewed-by: Michael Schmitz Acked-by: Geert Uytterhoeven Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe

ide/macide: Convert Mac IDE driver to platform driver

2020-09-28T08:48:17Z

Add platform devices for the Mac IDE controller variants. Convert the macide module into a platform driver to support two of those variants. For the third, use a generic "pata_platform" driver instead. This enables automatic loading of the appropriate module and begins the process of replacing the driver with libata alternatives. Signed-off-by: Finn Thain Tested-by: Stan Johnson Cc: Bartlomiej Zolnierkiewicz Cc: Joshua Thompson References: commit 5ed0794cde593 ("m68k/atari: Convert Falcon IDE drivers to platform drivers") References: commit 7ad19a99ad431 ("ide: officially deprecated the legacy IDE driver") Link: https://lore.kernel.org/r/edd106dad1bbea32500601c6071f37a9f02a8004.1600901284.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven

ide/ata: Add module.h to the implicit modular users

2011-10-31T23:31:37Z

A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in the ide dir are actually calling out for explicitly in advance. Signed-off-by: Paul Gortmaker

ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

2009-06-15T16:52:58Z

Move the ack_intr() method into 'struct ide_port_ops', also renaming it to test_irq() while at it... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz

ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)

2009-06-15T16:52:57Z

There are now two methods that clear the port interrupt: ack_intr() method, implemented only on M680x0 machines, that is called at the start of ide_intr(), and clear_irq() method, that is called somewhat later in this function. In order to stop this duplication, delegate the task of clearing the interrupt to clear_irq() method, only leaving to ack_intr() the task of testing for the port interrupt. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz

ide: remove hw_regs_t typedef

2009-05-17T17:12:25Z

Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz

ide: pass number of ports to ide_host_{alloc,add}() (v2)

2009-05-17T17:12:24Z

Pass number of ports to ide_host_{alloc,add}() and then update all users accordingly. v2: - drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c (noticed by Sergei) There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz

ide: remove chipset field from hw_regs_t

2009-05-17T17:12:22Z

* Convert host drivers that still use hw_regs_t's chipset field to use the one in struct ide_port_info instead. * Move special handling of ide_pci chipset type from ide_hw_configure() to ide_init_port(). * Remove chipset field from hw_regs_t. While at it: - remove stale comment in delkin_cb.c There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz

ide: allow host drivers to specify IRQ flags

2009-03-27T11:46:27Z

* Add ->irq_flags field to struct ide_port_info and struct ide_host. * Update host drivers and IDE PCI code to use ->irq_flags field. * Convert init_irq() and ide_intr() to use host->irq_flags. This fixes handling of shared IRQs for non-PCI hosts and removes ugly ifdeffery from core IDE code. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: make m68k host drivers use IDE_HFLAG_MMIO

2009-03-27T11:46:23Z

Cc: Geert Uytterhoeven Cc: Michael Schmitz Signed-off-by: Bartlomiej Zolnierkiewicz