kernel/drivers/ide/ide-probe.c, branch linux-4.16.y

genhd: Rename get_disk() to get_disk_and_module()

2018-02-26T16:48:42Z

Rename get_disk() to get_disk_and_module() to make sure what the function does. It's not a great name but at least it is now clear that put_disk() is not it's counterpart. Signed-off-by: Jan Kara Signed-off-by: Jens Axboe

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T01:56:58Z

Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...

ide: Convert timers to use timer_setup()

2017-11-06T20:50:03Z

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" Cc: linux-ide@vger.kernel.org Signed-off-by: Kees Cook

ide: free hwif->portdev on hwif_init() failure

2017-10-03T18:36:17Z

Recent pci_assign_irq() changes uncovered a problem with missing freeing of ide_port class instance on hwif_init() failure in ide_host_register(): ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0 sysfs: cannot create duplicate filename '/class/ide_port/ide0' ... Trace: [] __warn+0x160/0x190 [] sysfs_warn_dup+0x94/0xd0 [] warn_slowpath_fmt+0x58/0x70 [] sysfs_warn_dup+0x94/0xd0 [] kernfs_path_from_node+0x30/0x60 [] kernfs_put+0x16c/0x2c0 [] kernfs_put+0x16c/0x2c0 [] sysfs_do_create_link_sd.isra.2+0x100/0x120 [] device_add+0x2a4/0x7c0 [] device_create_groups_vargs+0x14c/0x170 [] device_create_groups_vargs+0x98/0x170 [] device_create+0x50/0x70 [] ide_host_register+0x48c/0xa00 [] ide_host_register+0x450/0xa00 [] device_register+0x20/0x50 [] ide_host_register+0x450/0xa00 [] ide_host_add+0x64/0xe0 [] kobject_uevent_env+0x16c/0x710 [] do_one_initcall+0x68/0x260 [] kernel_init+0x1c/0x1a0 [] kernel_init+0x0/0x1a0 [] ret_from_kernel_thread+0x18/0x20 [] kernel_init+0x0/0x1a0 ---[ end trace 24a70433c3e4d374 ]--- ide0: disabling port Fix the problem by adding missing code to ide_host_register(). Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Bartlomiej Zolnierkiewicz [bhelgaas: add Fixes:] Signed-off-by: Bjorn Helgaas Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner

block: Change argument type of scsi_req_init()

2017-06-21T01:27:14Z

Since scsi_req_init() works on a struct scsi_request, change the argument type into struct scsi_request *. Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Martin K. Petersen Signed-off-by: Jens Axboe

block: Make most scsi_req_init() calls implicit

2017-06-21T01:27:14Z

Instead of explicitly calling scsi_req_init() after blk_get_request(), call that function from inside blk_get_request(). Add an .initialize_rq_fn() callback function to the block drivers that need it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn() because it is too small to keep it as a separate function. Keep the scsi_req_init() call in ide_prep_sense() because it follows a blk_rq_init() call. References: commit 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Bart Van Assche Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Omar Sandoval Cc: Nicholas Bellinger Signed-off-by: Jens Axboe

block: Introduce queue flag QUEUE_FLAG_SCSI_PASSTHROUGH

2017-06-01T19:10:40Z

From the context where a SCSI command is submitted it is not always possible to figure out whether or not the queue the command is submitted to has struct scsi_request as the first member of its private data. Hence introduce the flag QUEUE_FLAG_SCSI_PASSTHROUGH. Signed-off-by: Bart Van Assche Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Cc: Omar Sandoval Cc: Don Brace Signed-off-by: Jens Axboe

ide: use setup_timer

2017-05-08T21:36:39Z

Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang Signed-off-by: David S. Miller

block: split scsi_request out of struct request

2017-01-27T22:08:35Z

And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds