kernel/drivers/hid/hid-multitouch.c, branch master

HID: multitouch: Check to ensure report responses match the request

2026-03-17T10:36:16Z

It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early. Signed-off-by: Lee Jones Signed-off-by: Benjamin Tissoires

HID: multitouch: Keep latency normal on deactivate for reactivation gesture

2026-02-26T16:10:22Z

Uniwill devices have a built in gesture in the touchpad to de- and reactivate it by double taping the upper left corner. This gesture stops working when latency is set to high, so this patch keeps the latency on normal. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach [jkosina@suse.com: change bit from 24 to 25] [jkosina@suse.com: update shortlog] Signed-off-by: Jiri Kosina

HID: multitouch: new class MT_CLS_EGALAX_P80H84

2026-02-24T08:41:21Z

Fixes: f9e82295eec1 ("HID: multitouch: add eGalaxTouch P80H84 support") Signed-off-by: Ian Ray Signed-off-by: Jiri Kosina

HID: multitouch: add eGalaxTouch EXC3188 support

2026-01-23T12:54:21Z

Add support for the for the EXC3188 touchscreen from eGalaxy. Signed-off-by: Thorsten Schmelzer Signed-off-by: Michael Tretter Signed-off-by: Jiri Kosina

HID: multitouch: add quirks for Lenovo Yoga Book 9i

2026-01-10T09:04:59Z

The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite USB device providing both touch and tablet interfaces for both screens. All inputs report through a single device, differentiated solely by report numbers. As there is no way for udev to differentiate the inputs based on USB vendor/product ID or interface numbers, custom naming is required to match against for downstream configuration. A firmware bug also results in an erroneous InRange message report being received after the stylus leaves proximity, blocking later touch events. Add required quirks for Gen 8 to Gen 10 models, including a new quirk providing for custom input device naming and dropping erroneous InRange reports. Signed-off-by: Brian Howard Tested-by: Brian Howard Tested-by: Kris Fredrick Reported-by: Andrei Shumailov Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386 Signed-off-by: Jiri Kosina

HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type

2026-01-07T14:28:09Z

A Digitizer/Button Type value of 1 indicates the device is a pressurepad, see https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires

HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL

2025-12-19T11:12:08Z

Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently fail to release a finger contact. A previous slot remains logically active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing gestures to stay latched and resulting in stuck two-finger scrolling and false right-clicks. Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225 Suggested-by: Benjamin Tissoires Tested-by: DaytonCL Signed-off-by: DaytonCL Signed-off-by: Benjamin Tissoires

HID: multitouch: fix sticky fingers

2025-10-15T15:27:06Z

The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering the case when slots were not released during the last report. This can be problematic if the firmware forgets to release a finger while others are still present. This was observed on the Synaptics DLL0945 touchpad found on the Dell XPS 9310 and the Dell Inspiron 5406. Fixes: 4f4001bc76fd ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: multitouch: fix name of Stylus input devices

2025-10-15T15:17:30Z

HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by commit c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN"). However, on multitouch devices, these suffixes may be overridden. Before that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after that, multitouch would override them to have an "UNKNOWN" suffix. Just add HID_DG_PEN to the list of non-overriden suffixes in multitouch. Before this fix: [ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8 ELAN9008:00 04F3:2E14 UNKNOWN After this fix: [ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8 ELAN9008:00 04F3:2E14 Stylus Fixes: c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN") Signed-off-by: Thadeu Lima de Souza Cascardo Reviewed-by: Mika Westerberg Signed-off-by: Jiri Kosina

HID: multitouch: add haptic multitouch support

2025-09-15T12:32:55Z

If CONFIG_HID_HAPTIC is enabled, and the device is recognized to have simple haptic capabilities, try initializing the haptic device, check input frames for pressure and handle it using hid_haptic_* API. Signed-off-by: Angela Czubak Co-developed-by: Jonathan Denose Signed-off-by: Jonathan Denose Signed-off-by: Benjamin Tissoires